Abstract:Regular visual inspection of the underwater surface of the ship’s hull to check its integrity and the degree of biofouling is necessary to ensure the safety and efficient operation of the ship. The article proposes a method for the automated solution of this problem using an autonomous uninhabited underwater vehicle (AUV) equipped with a stereo camera controlled by a tilt actuator. The movement of the AUV is carried out along equidistant lines along the ship’s hull with simultaneous video filming of the hull surface. The AUV trajectory is calculated using the visual navigation method (visual odometry). Estimated data on the localization of the AUV relative to the ship’s hull are used in the method of controlling the movement of the vehicle to ensure the stable movement of the vehicle at a given distance from the inspected surface. Direct calculation of AUV localization data is done using the proposed original algorithm, which is implemented in the form of a software tool "stereo rangefinder". The operation of the "stereo rangefinder" is based on the matching of features in images using the SURF detector, followed by the construction of a 3D point cloud. The technique for performing automatic inspection of the ship as a whole is described. Fixed stereo images are also used to build a 3D model of the surface being examined. The applied method of constructing a global spatial model of the surface is based on the union of 3D point clouds obtained for local views. The construction of a 3D point cloud for a particular view is based on a matching of 2D point features on images of a stereo pair (SURF detector / correlation calculation), followed by the use of the ray triangulation method to obtain the spatial coordinates of the points. The presence of a 3D model makes it possible to conduct a detailed visual analysis of the state of the ship’s hull. Simulation modeling of the functioning of the developed tools on virtual scenes was carried out. Quantitative and qualitative performance evaluations obtained as a result of testing showed the acceptability of the proposed method for automatic inspection of the underwater part of the ship’s hull.

Sea-trial verification of ultrasonic antifouling control

Experimental study on ship fouling cleaning by ultrasonic-enhanced submerged cavitation jet: A preliminary study

Ultrasonic-Assisted Marine Antifouling Strategy on Gel-like Epoxy Primer

Design and Implementation of a Long-Term Ship-Monitoring System Using Vector Hydrophone

Experimental assessment and numerical simulations of marine fouling effect on underwater sound absorption coatings

Sea-trial research on natural product-based antifouling paint applied to different underwater sensor housing materials

Experimental validation on structure-borne underwater radiated noise transfer function analysis for marine structure

Numerical modelling of acoustic pressure fields to optimize the ultrasonic cleaning technique for cylinders

Study on the Technology of Ultraviolet Laser Cleaning Ship Surface Paint Layer

Experimental Study on Sound Transmission Loss in the Anti-shock Layer of a Ship

Target strength analysis using reflection coefficient of a submarine with low-frequency anechoic coatings

Development of Integrated Acoustic Communication and Positioning System for Operation of Autonomous Underwater Vehicles and a Sea Trial

Ship hull in-water cleaning and its effects on fouling-control coatings

Force-responsive Antibiofouling Strategy Based on the Ultrasound-Controlled Piezoelectric Effect

Design and Implementation of a Shipborne Echo Sounder Simulator Based on a Seabed Echo Scattering and Noise Model

Long-Range Automatic Detection, Acoustic Signature Characterization and Bearing-Time Estimation of Multiple Ships with Coherent Hydrophone Array

Ship Hull Inspection Using Autonomous an Underwater Vehicle with a Stereo Camera

Vibro-acoustics Analysis of Shallow-Sea Super Large FPSO

Evaluation of the Corrosion Protection of Two Underwater Coating Systems in a Simulated Marine Environment

Non-Destructive Evaluation of Coating Thickness Using Water Immersion Ultrasonic Testing

Experimental Research on Antiscale, Scale Removal and Enhancement of Heat Transfer of Ultrasound