Abstract:Currently, the field of microgear manufacturing faces various processing challenges, particularly in terms of size reduction; these challenges increase the complexity and costs of manufacturing. In this study, a technique for microgear manufacturing is aimed at reducing subsequent processing steps and enhancing material utilization. This technique involves the use of trough dies with extrusion-cutting processing, which enables workpieces to undergo forming in a negative clearance state, thus reducing subsequent processing time for micro products. We conducted finite element simulations using microgear dies, measuring stress, velocity, and flow during the forming process of four types of dies-flat, internal-trough, external-trough, and double-trough dies. The results indicated that the buffering effect of the troughs reduced the rate of increase in the material's internal stress. In the cavity, the material experiences a significant increase in hydrostatic pressure, leading to the formation of a "hydrostatic pressure wall". This pressure barrier imposes substantial constraints on the flow of the material during dynamic processes, making it difficult for the material to move into the remaining areas. This effectively enhances the blockage of material flow, demonstrating the critical role of hydrostatic pressure in controlling material distribution and movement. In addition, combining the characteristics of both into a double-trough die enhances the overall stability of forming velocity, reduces forming load and energy consumption, and maximizes material utilization. Results further revealed that microgears manufactured using double-trough dies exhibited defect-free surfaces, with a dimensional error of less than 5 μm and tolerances ranging from IT5 to IT6. Overall, this study offers new insights into the traditional field of microgear manufacturing, highlighting potential solutions for the challenges encountered in current microstamping processes.

Producing Microlayer Pipes and Tubes through Multiplication Coextrusion and Unique Annular Die: Simulation and Experiment

Controllable Preparation of Microscale Tubes with Multiphase Co-Laminar Flow in a Double Co-Axial Microdevice

Continuous Extrusion Forming Technology of Magnesium Alloy Thin-Walled Tubules

An Experimental Study on Local Thickening Laws Based on Multi-Plate Extrusion

Numerical and Experimental Studies on the Improvement of Gas Chamber Structure During Gas-Assisted Extrusion

A Forming Method of Variable-diameter Tubes Straightforward from Sheet Metals

Numerical Model of Jet Formation During Melt Electrowriting for Fabrication of Precise Structures

Effect of Internal Pressure Distribution on Thickness Uniformity of Hydroforming Y-shaped Tube

Deformation Patterns in Hydroforming of Thin-Walled Y-Shaped Tube

Multipass cold drawing of magnesium alloy minitubes for biodegradable vascular stents.

Fabrication of Multiple Parallel Microchannels in a Single Microgroove via the Heating Assisted MIMIC Technique

Ploughing-Pulling Forming for Wicking Structure of Flat Micro-Groove Heat Pipe and Machine Tool Optimization

Basic Study on Thixo-Co-Extrusion of Multi-Layer Tube with Al/Mg Alloys

Robust and functional polyamide 11 tubular product featuring helical flow-regulated interpenetrating configuration of carbon nanofiber

A simple method for fabricating multi-layer PDMS structures for 3D microfluidic chips

The Stamping Method Utilizing a Double-Trough Die in Microforming to Enhance Formability

Inner Surface Morphology and Roughness Evolution of Pilgering Thick-Walled Tubes

Morphology Analysis Of A Multilayer Single Pass Via Novel Metal Thin-Wall Coating Forming

Study on forming process of equal wall thickness metal spiral pipe by single screw pump

Multimaterial Extrusion of Programmable Periodic Filament Structures Via Modularly Designed Extruder Heads

Towards Manufacturing of Ultrafine-Laminated Structures in Metallic Tubes by Accumulative Extrusion Bonding