Abstract:The Salawusu aquifer in the Ordos coalfield is characterized by large thickness and water abundance. Most wells built in such water-rich sand layers are constructed by artificial freezing method. After thawing of the frozen wall, the original crack in the shaft wall gradually expands, penetrates, and even cracks because of the high external water pressure, then, resulting in water inrush and sand collapse. In order to solve the above problems, we adopted the method of laboratory tests to conduct the properties tests of cement slurry with various additives in low temperature environment. The setting time, strength, and rheological properties of the cement slurry with addition of NaCl, Ca(HCOO)2, CaCl2, and sodium silicate were studied respectively. The research results showed that NaCl, Ca(HCOO)2, CaCl2, and sodium silicate could effectively shorten the setting time at low temperature. The addition of NaCl, Ca(HCOO)2, and CaCl2 in cement slurry has a critical amount. When NaCl, Ca(HCOO)2, and CaCl2 amounts were lower than the critical amount, the setting time of the cement slurry was negatively correlated with the addition amount; while when they were higher than the critical amount, the setting time was positively correlated with the addition amount. For cement slurry with sodium silicate, the setting time was negatively correlated with the sodium silicate amount and temperature. The viscosity and shear stress of cement slurry without addition were less affected by temperature, and NaCl, Ca(HCOO)2, or CaCl2 could slightly reduce the viscosity and shear stress. With water-cement ratio of 1:1 and 5%NaCl was added, the cement slurry achieved good results for ground grouting in field application. It has obvious effects on flood control and sand fixation of water-rich sand layer, and could exert great influence on water blocking, material source reducing, and dynamic water head decreasing.

Aberrant gelation mechanism initiated by component difference of oil well cement slurry at high temperature and its regulators

Occurrence Mechanism of the Abnormal Gelation Phenomenon of High Temperature Cementing Slurry Induced by a Polycarboxylic Retarder

Synthesis and Reaction Mechanism of Geopolymer Gels with Increasing Calcium Content: from Experiments to Molecular Dynamics Simulation

Effect of MgO and superfine slag modification on the carbonation resistance of phosphogypsum-based cementitious materials: Based on hydration enhancement and phase evolution regulation

Optimization on overall performance of Modified Ultrafine Cementitious Grout Materials (MUCG) and hydration mechanism analysis

Hydration behavior and strength development of supersulfated cement prepared by calcined phosphogypsum and slaked lime

Thickening progression mechanism of silica fume – Oil well cement composite system at high temperatures

Microstructure Formation and Degradation Mechanism of Cementitious Plugging Agent Slurries

Effect of Alkali Content in Cement on the Fluidity and Structural Build-Up of Plasticized Cement Pastes

Role of the structure of synthetic Al(OH)3 on the properties of sulfoaluminate cement-based materials

Mechanisms of CLDH seeding on hydration kinetics of slag-based geopolymer: Towards aluminosilicate cement phase engineering

Development and application of low-melting-point microencapsulated phase change materials for enhanced thermal stability in cementing natural gas hydrate layers

Enhancing anti-washout behavior of cement paste by polyacrylamide gelation: From floc properties to mechanism

Associated Effects of Sodium Chloride and Dihydrate Gypsum on the Mechanical Performance and Hydration Properties of Slag-Based Geopolymer

Effect of amorphous aluminum hydroxide on the phosphogypsum-based cementitious materials in prefabricated building field

Degradation mechanisms of alkali-activated binders in sulfuric acid: The role of calcium and aluminum availability

Investigation on the Unusual Hydration and Hardening Process of a Portland Cement with Low Alkali Sulfate Content

Research on formulation optimization and hydration mechanism of phosphogypsum-based filling cementitious materials

Phosphogypsum as a component of calcium sulfoaluminate cement: Hazardous elements immobilization, radioactivity and performances

Properties and field application of the grouting material for water blocking during thawing of frozen wall of deep sand layer

Effect of Silica Crystalline State on Hydration Products of Tricalcium Silicate at High Temperatures