Abstract:Background: Electromagnetic tracking (EMT) has been researched for brachytherapy applications, showing a great potential for automating implant reconstruction, and overcoming image-based limitations such as contrast and spatial resolution. One of the challenges of this technology is that it does not intrinsically share the same reference frame as the patient's medical imaging. Purpose: To present a novel phantom that can be used for a comprehensive quality assurance (QA) program of brachytherapy EMT systems and use this phantom to validate a novel applicator-based registration method of EMT and image reference frames for gynecological (GYN) interstitial brachytherapy. Materials and methods: Eleven 6F-catheters (20 cm long), one 6F round tip catheter (29.4 cm long) and a tandem and ring gynecological applicator (Elekta, CT/MR 60°, 40 mm long tandem, 30 mm diameter ring) were placed in a rigid custom-made phantom (Elekta Brachytherapy, Veenendaal, The Netherlands) to reconstruct their geometry using a five-degree of freedom EMT sensor attached to an afterloader's check cable. All EMT reconstructions were done in three different environments: disturbance free (no metal nearby), computed tomography (CT)-on-rails brachytherapy suite and magnetic resonance imaging (MRI) brachytherapy suite. Implants were placed parallel to a magnetic field generatorand were reconstructed using two different acquisition methods: step-and-record and continuous motion. In all cases, the acquisition is performed at a rate of approximately 40 Hz. A CT scan of the phantom inside a water cube was obtained. In the treatment planning system (TPS), all catheters in the CT images were manually reconstructed and the applicator reconstruction was achieved by manually placing its solid 3D model, found in the applicator library of the TPS. The Iterative Closest Point and the Coherent Point Drift algorithms were used, initialized with four known points, to register both EMT and CT scan reference frames using corresponding points from the EMT and CT based reconstructions of the phantom, following three approaches: one gynecological applicator, four interstitial catheters inside four calibration plates having an S-shaped path, and four 5 mm diameter ceramic marbles found in each of the four calibration plates. Once registered, the registration error (perpendicular distance) was computed. Results: The absolute median deviation from the expected value for EMT measurements in the disturbance free environment, CT-on-rails brachytherapy suite, and MRI-brachytherapy suite are 0.41, 0.23, and 0.31 mm, respectively, while for the CT scan it is 0.18 mm. These values significantly lie below the sensor's expected accuracy of 0.70 mm (p < 0.001), suggesting that the environment did not have a significant impact on the measurements, given that care is taken in the immediate surroundings. In all three environments, the two acquisitions and three registration approaches have mean and median registration errors that lie at or below 1 mm, which is lower than the clinical acceptable threshold of 2 mm. Conclusions: The novel phantom allowed to successfully evaluate the accuracy of EMT-based reconstructions of catheters and a GYN tandem and ring applicator in different clinical environments. A registration method based only on the applicator geometry, reconstructed withan EMT sensor and the TPS solid applicator library, was validated and shows clinically acceptable accuracy, comparable to CT-based reconstruction but within a few minutes. Since the applicator is also visible in MRI, this method could potentially be used in clinics in an EMT-MR interstitial GYN brachytherapy workflow.

A target containing phantom for accuracy assessment of cone‐beam CT‐guided histotripsy

A Multimodal Phantom for Visualization and Assessment of Histotripsy Treatments on Ultrasound and X-Ray Imaging

Evaluating Targeting Accuracy in the Focal Plane for an Ultrasound-guided High-intensity Focused Ultrasound Phased-array System

Experimental Evaluation of Targeting Accuracy of an Ultrasound-Guided Phased-Array High-Intensity Focused Ultrasound System

Application Testing for Cone-beam CT Image-guided Radiation Therapy

Target Visibility Enhancement for C-arm Cone Beam CT-fluoroscopy-guided Hepatic Needle Placement: Implementation and Accuracy Evaluation.

Accuracy of an electromagnetic tracking enabled afterloader based on the automated registration with CT phantom images

TU‐A‐BRA‐09: Phase‐Matched Digital Tomosynthesis (DTS) Imaging for Simultaneous Target Verification During Volumetric Modulated Arc Therapy (VMAT) Treatment

Repeated CT Scan in Improving the Reproducibility of Grass Tumor Volume for Moving Target

Assessing target localization accuracy across different soft-tissue matching protocols using end-exhalation breath-hold cone-beam computed tomography in patients with pancreatic cancer

Effects of Irregular Respiratory Motion on the Positioning Accuracy of Moving Target with Free Breathing Cone-Beam Computerized Tomography.

Inhomogeneity detection within a head-sized phantom using tracking of charged nuclear fragments in ion beam therapy

Using Corrected Cone-Beam CT Image for Accelerated Partial Breast Irradiation Treatment Dose Verification: the Preliminary Experience

Automated target tracking in kilovoltage images using dynamic templates of fiducial marker clusters

Detection of Intrafractional Tumour Position Error in Radiotherapy Utilizing Cone Beam Computed Tomography

Evaluation of a novel patient-specific quality assurance phantom for robotic single-isocentre, multiple-target stereotactic radiosurgery, and stereotactic radiotherapy

SU‐E‐T‐539: the Effect of the Scattering Volume of Phantom on Dose Calculation Accuracy Using Elekta's Cone‐Beam Computed Tomography (CBCT) for Head‐Neck Radiotherapy

An Anthropomorphic Head and Neck Quality Assurance Phantom for Credentialing of Intensity-Modulated Proton Therapy.

Evaluating AI-generated CBCT-based synthetic CT images for target delineation in palliative treatments of pelvic bone metastasis at conventional C-arm linacs

A Comparison of Patient Position Displacements from Catalyst™ System and Cone Beam CT Registrations for Treatment

Real-Time Automated Target Volume and Motion Quantification for Adaptive Four-Dimensional Mri/Ct Guided Radiation Therapy