Abstract:Next generation cosmic microwave background (CMB) polarimetry experiments aim to deploy order 500,000 detectors, requiring repeatable and reliable fabrication process with stable and uniform transition edge sensor (TES) bolometer performance. We present a hafnium (Hf)-based TES bolometer for CMB experiments. We employ a novel heated sputter deposition of the Hf films enabling us to finely tune the critical temperature (Tc) between 140 mK - 210 mK. We found elevated deposition temperatures result in films with lower stress, larger crystal sizes, and a smaller relative abundance of the m-plane to c-plane $\alpha$ phase, all contributing to the empirical linear dependence of critical temperature on deposition temperature. Crucially, the heated sputter deposition simultaneously ensures that the critical temperature does not drift despite exposure to heat throughout ongoing fab processes (sometimes reaching 350C) as long as the initial deposition temperature is not exceeded. Tcs lower than 170 mK require deposition temperature greater than 400C, far in excess of typical temperatures the wafer may experience. This ample thermal budget allows us to relax the stringent thermal management that conventional aluminum manganese (AlMn) TES bolometers require, for which temperatures as low as 200C - 250C are used to anneal the AlMn in an effort to adjust the Tc. Hf additionally exhibits an intrinsic steep superconducting transition (we measure $\alpha >$ 200) and a corresponding high loop gain (exceeding $\mathcal{L}>10$ deep in the transition). We precisely design the normal resistance of the TES to range between 10 milli-Ohm and 1 Ohm through an interdigitated geometry, making these TES bolometers compatible with both TDM, FDM, and $\mu$-mux readout systems. We report on bolometer parameters including critical temperature, normal resistance, saturation power, time constant, and loop gain.

Fabrication and Characterization of Ultrathin PBCO/YBCO/PBCO Constrictions for Hot Electron Bolometer THz Mixing Application

Design and Fabrication of Superconducting HEB Mixer

Superconducting Nbn Hot Electron Bolometer Mixer at Terahertz

Engineering physics of superconducting hot-electron bolometer mixers

Noise Behaviour Of A Thz Superconducting Hot-Electron Bolometer Mixer

High Sensitive Thz Superconducting Hot Electron Bolometer Mixers and Transition Edge Sensors

HIGH TEMPERATURE SUPERCONDUCTOR HARMONIC MIXING MOUNTED ON CRYOCOOLER

Characterization of a Quasi-optical NbN Superconducting Hot-electron Bolometer Mixer

Series YBCO Grain Boundary Josephson Junctions As a Terahertz Harmonic Mixer

Enhanced Sensitivity of THz NbN Hot Electron Bolometer Mixers

Fundamental limits of few-layer NbSe$_2$ microbolometers at terahertz frequencies

Linear and nonlinear flux-flow behaviors in superconducting hot-electron bolometer mixers

Epitaxial growth and characterization of (110)-oriented YBCO/PBCGO bilayer and YBCO/PBCGO/YBCO trilayer heterostructures

Fabrication of YBCO Coated Conductors on Biaxial Textured Metal Substrate by All-Sputtering

Measurements of dichroic bow-tie antenna arrays with integrated cold-electron bolometers using YBCO oscillators

Epitaxial YBa/sub 2/Cu/sub 3/O/sub 7/(7-x) thin films on CeO/sub 2/ buffered sapphire for optical mixers

Development of hafnium-based transition edge sensor bolometers for cosmic microwave background polarimetry experiments

HTS step-edge Josephson junction terahertz harmonic mixer

Low Noise Receivers Based on Superconducting Niobium Nitride Hot Electron Bolometer Mixers from 0.65 to 3.1 Terahertz

Dependence of Noise Temperature of Quasi-Optical Superconducting Hot-Electron Bolometer Mixers on Bath Temperature and Optical-Axis Displacement

Studies of Ferroelectric Field Effects in Pt/Pb(Zr/sub 0.5/ti/sub 0.5/)o/sub 3//yba/sub 2/cu/sub 3/o/sub 7/ Heterostructures