Abstract:SPARK-NC, a 10 MW(e) lead-bismuth eutectic (LBE) cooled fast reactor design, exhibits promising characteristics like inherent gamma shielding, natural circulation, and a high boiling point. Following detailed neutronic studies, a thorough investigation of nuclear safety necessitates a detailed analysis of the core radionuclide inventory. This information is particularly crucial for source term calculations, which play a vital role in assessing the potential radiological consequences. This study establishes the life-cycle inventory of SPARK-NC using two independent computational systems: ORIGEN2.2 and NECP-SARAX. ORIGEN2.2, equipped with a reactor- specific library generated by NECP-MCX, is used for average whole-core inventory analysis. NECP-SARAX, on the other hand, explicitly considers core heterogeneity in terms of enrichment, specific power, and burn-up. This work presents the radionuclide inventories and the relative calculation differences observed between the codes. Actinides like uranium and curium display minimal code dependence, while plutonium isotopes exhibit a maximum relative difference of 8 %. Fission products generally agree within 5 %, except for I-131, which shows a discrepancy of around 10 %. The activity of I-131 and Cs-137 are estimated to be approximately 1 x 1016 Bq and 3 x 1015 Bq, respectively. Additionally, the photon source strength is 1017/s at 1 MeV, dropping to 1016/s below 6 MeV. Fission products and actinides contribute a decay heat of 0.65 MW. Assembly-wise analysis reveals a direct proportionality between radionuclide inventory and peaking factor, with the average assembly inventory being roughly 25 % lower than the peak assembly inventory. Rare earth elements (Ce, Sm, Pm, Pr, Nd, La, Y) exhibit a maximum mass of approximately 8.5 kg with a 3 % relative difference between the codes. Conversely, halogens (I, Br) have a minimum mass of around 0.2 kg with a 13 % relative difference. These findings, alongside the quantification of radionuclides, provide valuable insights into the code selection for future analyses of SPARK-NC and similar reactor systems.

Design and validation of a fission-product source for radioactive beams

A Prototype Compact Accelerator Driven Neutron Source for Canada Supporting Medical and Scientific Applications

A Novel Method for Designing the Moderator of Accelerator-Driven Neutron Source

An experimental study of the moderator assembly for a low-energy proton accelerator neutron irradiation facility for BNCT

Experimental Verification of Beam Characteristics for Cyclotron-Based Epithermal Neutron Source (C-Bens)

Thermal-to-fusion Neutron Convertor and Monte Carlo Coupled Simulation of Deuteron/triton Transport and Secondary Products Generation

Preliminary Design of a Hybrid Ion Source for 7li3+ Generation

Neutron generator based on intense lithium beam driver

Compact shielding and irradiator design of a 252Cf neutron source

Enabling a Multi-Purpose High-Energy Neutron Source Based on High-Current Compact Cyclotrons

Improvement of Dose Distribution in Phantom by Using Epithermal Neutron Source Based on the Be(P,N) Reaction Using A 30 Mev Proton Cyclotron Accelerator

Fusion Driven Transmutation of Transuranics in a Molten Salt

The Preliminary Conceptual Design of the High-Power Neutron Converter for BISOL

An RFQ Based Neutron Source for BNCT

Efficient transmutation of long-lived fission products in a Gamma Factory beam driven advanced nuclear energy system

Nuclear Transmutation of 99Tc Utilizing Proton Spallation and Compact Subcritical Assembly

New Cf-252 neutron source shielding design based Monte Carlo simulation using material combination

PGNAA neutron source moderation setup optimization

Investigation on Radioisotopes Evolution in the Fuel of Lead-Bismuth Eutectic (LBE) Cooled SPARK-NC Core

Simulation of Physical Parameters for a Photoneutron Source

Neutrons production on the IPHI accelerator for the validation of the design of the compact neutron source SONATE