[Effect of carbon monoxide on cardiovascular system].

C. Pasqualucci

Arquivos Brasileiros de Cardiologia

Abstract:

What problem does this paper attempt to address?

A Robust Colorimetric Aptasensor for the Label-Free Detection of Marine Toxins Based on Tyrosine-Capped Gold Nanoparticles.

Liubing Kong,Xinyi Wang,Chiyu Ma,Shuqi Zhou,Xianyou Sun,Deming Jiang,Tianxing Wang,Hao Wan,Ping Wang

DOI: https://doi.org/10.1039/d2an01394k

2022-01-01

The Analyst

Abstract:PbTx-2 and okadaic acid (OA) are two typical marine toxins that are highly toxic and harmful to human health. The approach based on citrate-capped gold nanoparticles (Cit-AuNPs) and specific aptamers to construct label-free colorimetric sensors is a widely used method for marine toxin detection. However, the potential interactions between Cit-AuNPs and target molecules have always been ignored, which may result in wrong analytical results due to shortcomings in the Cit-AuNPs. To overcome these shortfalls, in this work, AuNPs were synthesized using tyrosine as a reducing and capping agent, and a robust colorimetric aptasensor based on tyrosine-capped AuNPs (Tyr-AuNPs) was constructed for the label-free detection of marine toxins. Tyr-AuNPs presented better stability compared to Cit-AuNPs due to the stronger binding of amine groups on tyrosine to AuNPs through the Au-N bond. Interactions between Tyr-AuNPs and PbTx-2 were analyzed through UV-vis and isothermal titration calorimetry methods and the results validated the robustness of the Tyr-AuNPs. Colorimetric aptasensors were established for PbTx-2 and OA detection with a linear range of 0.05-4 ppm and limits of detection of 2.25 ppb and 5.19 ppb, respectively. These results demonstrate that the developed colorimetric aptasensor can be a robust and promising method for marine toxin detection.
An Amperometric Immunosensor Based on an Ionic Liquid and Single-Walled Carbon Nanotube Composite Electrode for Detection of Tetrodotoxin in Pufferfish.

Yun Zhang,Yuxia Fan,Jian Wu,Xichang Wang,Yuan Liu

DOI: https://doi.org/10.1021/acs.jafc.6b02426

IF: 6.1

2016-01-01

Journal of Agricultural and Food Chemistry

Abstract:An amperometric immunosensor based on a composite electrode of single-walled carbon nanotubes and ionic liquid n-octylpyridinum afluorophosphate (SWCNT-ILE) was developed for the determination of tetrodotoxin (TTX). Compared with the glassy carbon electrode (GCE), the electrode combined advantages of carbon nanotubes and ionic liquid, which exhibited the excellent antifouling ability of p-nitrophenol (PNP) so that it remarkably improved the stability of the p-nitrophenyl phosphate-based sensor. Combining the enzyme-linked immune sorbent assay (ELISA) by alkaline phosphatase (AP) and magnetic particles immobilized with antigens, a real-time assay of tetrodotoxin was developed by amperometric immunosensors. Under the optimium condition, the developed sensor demonstrated a linear range of tetrodotoxin from 2 to 45 ng/mL with a low detection limit of 5 ng/mL. Furthermore, the amperometric immunosensor was applied to determine TTX in real samples and could be used as an effective and sensitive sensor for direct detection of tetrodotoxin within 20 min.
Surface plasmon resonance enhanced real-time photoelectrochemical protein sensing by gold nanoparticle-decorated TiO₂ nanowires.

Peimei Da,Wenjie Li,Xuan Lin,Yongcheng Wang,Jing Tang,Gengfeng Zheng

DOI: https://doi.org/10.1021/ac501406x

IF: 7.4

2014-01-01

Analytical Chemistry

Abstract:Recently developed photoelectrochemical (PEC) sensing systems represent a unique potential detection method for real-time analysis of chemical/biological molecules, while the low absorption of TiO2 nanomaterials in the visible wavelength region and the slow surface charge transfer efficiency limit the ultimate sensitivity. Here we develop a gold nanoparticle-decorated TiO2 nanowire sensor for PEC detection of protein binding. The direct attachment of Au nanoparticles to TiO2 nanowires offers strong surface plasmon resonance for electrochemical field effect amplification, yielding a similar to 100% increase of photocurrent density. In addition, the surface functionalization of gold nanoparticles allows for direct capturing of target proteins near the Au/TiO2 interface and thus substantially enhances the capability of attenuation of energy coupling between Au and TiO2, leading to much-improved sensor performance. As a proof of concept, cholera toxin subunit B has been robustly detected by the TiO2-Au nanowire sensor functionalized with ganglioside GM!, with a high sensitivity of 0.167 nM and excellent selectivity. Furthermore, the real-time feature of photoelectrochemical sensing enables direct measurement of binding kinetics between cholera toxin subunit B and GM!, yielding association and disassociation rate constants and an equilibrium constant K-d of 4.17 nM. This surface plasmon resonance-enhanced real-time, photoelectrochemical sensing design may lead to exciting biodetection capabilities with high sensitivity and real-time kinetic studies.
Photoelectrochemical aptasensor based on PTCDA/TiO 2 efficient sensitization effect for sensitive protein analysis

Mengjie Li,Ying Wu,Jiapeng Wang,Feng Zhang,Lingying Xia

DOI: https://doi.org/10.1016/j.microc.2023.109006

IF: 5.304

2023-06-25

Microchemical Journal

Abstract:Herein, a photoelectrochemical (PEC) aptasensor for sensitive detection of C-reactive protein (CRP) was designed based on the efficient sensitization effect of 3,4,9,10-Perylene tetracarboxylic dianhydride (PTCDA) towards titanium dioxide (TiO 2 ). Initially, TiO 2 and PTCDA were continuously incubated on electrode surface to produce a strong PEC signal owing to the PTCDA/TiO 2 sensitization structure. Subsequently, electrodeposition of gold nanoparticles (dep Au) was performed to connect with the incubated CRP aptamer (S1) via AuN bonds. After that, 1-hexanethiol (HT) was added on the surface of the modified electrode to block the non-specific adsorption sites. Eventually, with the addition of CRP, the PEC signal decreased significantly because the CRP-S1 complexes generated by the specific recognition of CRP and S1 resulted in high steric hindrance effect and inhibited electron transfer. Under optimal conditions, the proposed PEC aptasensor was applied successfully for sensitive CRP detection with a wide linear range from 10 pg/mL to 10 μg/mL and a low detection limit of 3.33 pg/mL. Moreover, the designed PEC aptasensor based on PTCDA/TiO 2 sensitized structure might be a versatile tool that provides a powerful alternative to traditional proteins, ions and RNAs detection methods by changing the corresponding recognition sequences.

chemistry, analytical
Visible light driven photoelectrochemical thrombin aptasensor based on uniform TiO2 nanotube arrays modified with CuOx and perylene-3,4,9,10-tetracarboxylic acid

Qiaoxia Zhang,Haoyuan Lyu,Ning Li,Qing Liu,Xianxi Zhang,Xiao Zhang,Xiutong Wang,Qingyun Liu

DOI: https://doi.org/10.1016/j.electacta.2020.136774

IF: 6.6

2020-09-01

Electrochimica Acta

Abstract:In this work, a sensitive signal-off photoelectrochemical (PEC) thrombin aptasensor with satisfying specificity is proposed, in which the evident initial photocurrent response is produced by the photoanode and the signal amplification strategy toward the target is based on the specific bio-affinity properties between thrombin and their aptamers. The photoanode was fabricated with uniform TiO2 nanotube arrays decorated with CuOx and perylene-3,4,9,10-tetracarboxylic acid (PTCA). After the decoration of CuOx and PTCA, both possessing a strong absorption in visible region, the photocurrent response is improved greatly. Pt nanoparticles were modified on the photoanode electrode to immobilize thrombin aptamers, which could obviously improve the conductivity of the photoanode electrode owing to the excellent conductivity of Pt nanoparticles. The non-conductive complex leads to dramatical decrease in the photocurrent value due to the steric hinder effect. Based on the joint action of evident photocurrent response of photoanode and significant signal amplification strategy, the aptasensor in this project offers a wide linear range from 0.0003 nM to 10 nM, with a detection limit (3S/N) of thrombin down to 55 fM. Moreover, the as-fabricated aptasensor exhibits acceptable selectivity and stability, providing a meaningful attempt for the detection of thrombin.

electrochemistry
Label-Free Fluorescent Aptasensor for Ochratoxin-A Detection Based on CdTe Quantum Dots and (N-Methyl-4-pyridyl) Porphyrin.

Li Liu,Zafar Iqbal Tanveer,Keqiu Jiang,Qingwen Huang,Jinghui Zhang,Yongjiang Wu,Zheng Han

DOI: https://doi.org/10.3390/toxins11080447

IF: 5.075

2019-01-01

Toxins

Abstract:With the widespread contamination of ochratoxin A (OTA), it is of significant importance for detecting OTA in foods and traditional Chinese medicine (TCM). In this study, a novel label-free fluorescent aptasensor utilizing the interaction between OTA-triggered antiparallel G-quadruplex and (N-methyl-4-pyridy) porphyrin (TMPyP) for the rapid and sensitive determination of OTA was established. The fluorescence of CdTe quantum dots (QDs) could be quenched by TMPyP. In the presence of analyte (OTA), the aptamer could recognize OTA and transform from a random coil to the antiparallel G-quadruplex. The interaction between G-quadruplex and TMPyP could release CdTe QDs from TMPyP, and thus recover the fluorescence of CdTe QDs. Under optimized conditions, the detection limit of the designed aptasensor was 0.16 ng mL-1, with a linear range of 0.2 to 20 ng mL-1. Furthermore, this aptasensor showed high selectivity toward OTA against other structural analogs and other mycotoxins, and was successfully applied in Astragalus membranaceus samples. The presented aptasensor for OTA detection could be a promising tool for the field monitoring of food and TCM.
A sensitive label-free photoelectrochemical aptasensor based on a novel PTB7-Th/H2O2 system with unexpected photoelectric performance for C-reactive protein analysis

Meng-Jie Li,Hai-Jun Wang,Ruo Yuan,Ya-Qin Chai

DOI: https://doi.org/10.1016/j.bios.2021.113162

IF: 12.545

2021-06-01

Biosensors and Bioelectronics

Abstract:Herein, a sensitive label-free photoelectrochemical (PEC) aptasensor was constructed for C-reactive protein (CRP) analysis based on a novel and efficient poly{4,8-bis[5-(2-ethylhexyl) thiophen-2-yl]benzo[1,2-b:4,5-b']dithiophene-2,6-diyl-alt-3-fluoro-2-[(2-ethylhexyl)carbonyl] thieno[3,4-b]-thiophene-4,6-diyl} (PTB7-Th)/H2O2 system with unexpected photoelectric performance. The proposed PTB7-Th/H2O2 system without any sensitizer could surmount defect of the poor photoelectric conversion efficiency of PTB7-Th, leading to the unexpected 10-fold photocurrent enhancement compared to the common PTB7-Th/PBS system. The strong enhancement effect might originate from the special function of hydrogen peroxide (H2O2) towards PTB7-Th. On the one hand, H2O2 as electron acceptor could continuously capture photogenerated electrons located at acceptor part of PTB7-Th, which would visibly improve the charge separation efficiency of PTB7-Th and the electron-receiving property of electrolyte solution, thus leading to the obviously enhanced photoelectric conversion efficiency (PCE). More importantly, H2O2 as oxidant could oxidize PTB7-Th to obtain oxidation product of PTB7-Th (OPP) with carbonyl group and carboxyl group, and the electron cloud density in donor part of the OPP was higher than that of PTB7-Th, therefrom producing the stronger electron-donating property and higher photoelectrochemical (PEC) reaction efficiency. As a proof of concept, the proposed PTB7-Th/H2O2 system was successfully applied in the construction of a label-free PEC aptasensor for sensitive analysis of CRP, which performed a wide detection range from 1 pM to 1000 nM with a low detection limit of 0.33 pM. This study demonstrated a novel approach to the rational design of photoelectric conversion system with high PEC performance and provided an inspired tack for the construction of high-efficiency photoelectric devices.

biotechnology & applied microbiology,biophysics,chemistry, analytical,electrochemistry,nanoscience & nanotechnology
An electrochemical PAH-modified aptasensor for the label-free and highly-sensitive detection of saxitoxin

Beenish Noureen,Najeeb Ullah,Yulan Tian,Liping Du,Wei Chen,Chunsheng Wu,Ping Wang

DOI: https://doi.org/10.1016/j.talanta.2021.123185

IF: 6.1

2022-04-01

Talanta

Abstract:Saxitoxin (STX), is one of the most dangerous and widespread paralytic shellfish toxins, causing a severe threat to the ecosystem and human health. So, it is important and highly essential to develop novel techniques for STX detection in a convenient, desirable, and low-cost manner. Herein, this study developed an electrolyte-insulator-semiconductor (EIS) sensor covered with a layer-by-layer prepared, positively-charged weak polyelectrolyte layer of poly (allylamine hydrochloride) (PAH) for the label-free detection of STX. The specific aptamer (Apt) sensitive to STX was electrostatically adsorbed onto the PAH layer. This leads to a preferentially flat orientation of the Apt within the Debye length, thus yielding a reduced charge-screening influence and a higher sensor signal. Each step of sensor surface modification, i.e. PAH adsorption, immobilization of Apt, and attachment of STX, was monitored by capacitance-voltage (C-V) and constant-capacitance (ConCap) measurements. Furthermore, atomic force microscopy (AFM) was employed to characterize the surface morphology and roughness of the PAH layer. Fluorescence microscopy was used to confirm the effective immobilization of Apt onto the PAH-modified EIS sensor. The results showed that the detection range of this aptasensor for STX detection was 0.5-100 nM and the detection limit was as low as 0.05 nM. Furthermore, this aptasensor showed good selectivity and 9 days' stability. The mussel tissue extraction test suggested that this aptasensor can be used to detect STX in real samples. This aptasensor provides a convenient approach for moderate, rapid, and label-free detection of marine biological toxins.

chemistry, analytical
An Electrochemical Ti3C2Tx Aptasensor for Sensitive and Label-Free Detection of Marine Biological Toxins

Najeeb Ullah,Wei Chen,Beenish Noureen,Yulan Tian,Liping Du,Chunsheng Wu,Jie Ma

DOI: https://doi.org/10.3390/s21144938

IF: 3.9

2021-07-20

Sensors

Abstract:Saxitoxin (STX) belongs to the family of marine biological toxins, which are major contaminants in seafood. The reference methods for STX detection are mouse bioassay and chromatographic analysis, which are time-consuming, high costs, and requirement of sophisticated operation. Therefore, the development of alternative methods for STX analysis is urgent. Electrochemical analysis is a fast, low-cost, and sensitive method for biomolecules analysis. Thus, in this study, an electrolyte-insulator-semiconductor (EIS) sensor based on aptamer-modified two-dimensional layered Ti3C2Tx nanosheets was developed for STX detection. The high surface area and rich functional groups of MXene benefited the modification of aptamer, which had specific interactions with STX. Capacitance-voltage (C-V) and constant-capacitance (ConCap) measurement results indicated that the aptasensor was able to detect STX with high sensitivity and good specificity. The detection range was 1.0 nM to 200 nM and detection limit was as low as 0.03 nM. Moreover, the aptasensor was found to have a good selectivity and two-week stability. The mussel tissue extraction test suggested the potential application of this biosensor in detecting STX in real samples. This method provides a convenient approach for low-cost, rapid, and label-free detection of marine biological toxins.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Colorimetric and surface-enhanced Raman scattering dual-mode lateral flow immunosensor using phage-displayed shark nanobody for the detection of crustacean allergen tropomyosin

Sujia Jiao,Xincheng Chen,Zhenyun He,Long Wu,Xiaoxia Xie,Zhichang Sun,Sihang Zhang,Hongmei Cao,Bruce D Hammock,Xing Liu,Bruce D. Hammock

DOI: https://doi.org/10.1016/j.jhazmat.2024.133821

IF: 13.6

2024-04-01

Journal of Hazardous Materials

Abstract:Tropomyosin (TM) is the primary allergenic protein responsible for crustacean food allergies, and thus sensitive and rapid methods are required for the screening of crustacean TM in food. In this study, using the phage-displayed shark nanobody (PSN) as a multifunctional biomaterial, we developed a colorimetric and surface-enhanced Raman scattering dual-mode lateral flow immunosensor (CM/SERS-LFI) for competitive detection of crustacean TM. The SERS tag AuMBA@AgNPs with the Raman signal molecule 4-mercaptobenzoic acid (4-MBA) was prepared and immobilized on the PSN to construct the immunoprobe AuMBA@Ag-PSN. The probe can identify free TM that competes with TM on the T-line, and the optimized CM/SERS-LFI enables quantitative analysis of TM using the probe with a limit of detection (LOD) of 0.0026 μg/mL (SERS mode) and 0.0057 μg/mL (colorimetric mode), respectively. Additionally, it can implement a qualitative analysis by the naked eye with a visual LOD of 0.01 μg/mL. The CM/SERS-LFI exhibited excellent performance in the tests of selectivity, accuracy, precision, and stability. Moreover, the method's effectiveness in the analysis of real samples was confirmed by a commercial ELISA kit. Therefore, the developed CM/SERS-LFI was demonstrated to be a powerful and reliable tool for the rapid and sensitive detection of crustacean TM in food.

environmental sciences,engineering, environmental
SOME TRIALS WITH 'ORFENSO', A NEW ANALGESIC.

J. Mostert,S. Rencken

Abstract:
A Competitive Photoelectrochemical Aptasensor for Thrombin Detection Based on the Use of TiO2 Electrode and Glucose Oxidase Label

Jun-Tao Cao,Jing-Jing Zhang,Yun Gong,Xue-Jun Ruan,Yan-Ming Liu,Yong-Hong Chen,Shu-Wei Ren

DOI: https://doi.org/10.1016/j.jelechem.2015.11.023

IF: 4.598

2015-01-01

Journal of Electroanalytical Chemistry

Abstract:A novel competitive photoelectrochemical aptasensor for thrombin (TB) detection is proposed using TiO2 electrode coupled with TB-Au nanoparticles (AuNPs)–glucose oxidase (GOx) labels. To construct the aptasensor, chitosan was coated on the TiO2 surface for the further immobilization of TB aptamer that was bridged by the use of glutaraldehyde. TB detection was then performed based upon the competitive interaction of TB and TB-AuNPs-GOx bioconjugate with TB aptamer on the electrode. GOx could catalyze the glucose to produce H2O2, which acts as an effective electron donor to deplete the photogenerated holes located at the valence band of excited TiO2, resulting in the enhanced photocurrent response. Under the optimal conditions, the as-prepared PEC aptasensor exhibits excellent analytical property for detection of TB in the range from 1.0×10−12molL−1 to 1.0×10−8molL−1 with a detection limit of 1.9×10−13molL−1. Moreover, the aptasensor was also successfully applied for the determination of TB in human plasma. The present strategy provides a promising method for the future development of PEC aptasensor for advanced biochemical analysis.
An "on-off-on" electrochemiluminescence aptasensor based on a self-enhanced luminophore for ochratoxin A detection

Maosheng Sang,Xiaoya Meng,Yuhao Zhang,Zhongyu Li,Quanlong Zhou,Xiangzhu Jing,Xia Sun,Wenping Zhao

DOI: https://doi.org/10.1007/s00216-023-04864-8

Abstract:A highly selective and sensitive "on-off-on" electrochemiluminescence (ECL) aptasensor based on a self-enhanced luminophore was developed for the detection of ochratoxin A (OTA). Specifically, polyethyleneimine functionalized multi-walled carbon nanotubes decorated with gold nanoparticles (AuNPs-PEI-MWCNTs) were used as the electrode matrix to accelerate electron transfer and provide a favorable microenvironment for self-enhanced luminophore loading and ECL signal enhancement. In addition, black phosphorus quantum dots (BPQDs) were used as co-reactants of the ECL reagent tris (2,2'-bipyridyl) ruthenium(II) (Ru(bpy)32+) in ECL experiments, and the reaction mechanism was investigated. The self-enhanced luminophore Ru@SiO2-BPQDs was obtained by encapsulating Ru(bpy)32+ in silica (SiO2) nanoparticles and then combining it with BPQDs through electrostatic interaction. In conventional ECL systems, the emitter and its co-reactants reacted via the inter-nanoparticle pathway, leading to long distance electron transfer. However, the electron transfer distance in the self-enhanced luminophore was significantly shortened due to the intra-nanoparticle electron transfer pathway because BPQDs and oxidized Ru(bpy)32+ were bound within one nanoparticle, thereby improving ECL efficiency to achieve the first "switch-on" state. Then, the luminophore was quenched using ferrocenes (Fc) modified on an aptamer to achieve the "switch-off" state. Finally, OTA was specifically identified by the adapter, causing Fc to be released from the sensor interface, restoring the ECL intensity to achieve the second "switch-on" state. Under optimal conditions, the aptasensor exhibited good sensitivity, stability, and reproducibility, with a linear detection range from 0.1 to 320 ng/mL and a detection limit of 0.03 ng/mL. The novel ECL aptasensor provided a common analytical tool for the detection of mycotoxins and other small molecules.
A separated type cathode photoelectrochemical aptasensor for thrombin detection based on novel organic polymer heterojunction photoelectric material

Ya Tian,Baoying Wang,Jingjing Wang,Qingfu Guo,Xiaoyan Yang,Guangming Nie

DOI: https://doi.org/10.1016/j.microc.2021.107140

IF: 5.304

2022-04-01

Microchemical Journal

Abstract:In this work, poly(5-formylindole)/poly(3,4-ethylenedioxythiophene) (P5FIn/PEDOT) organic polymer heterojunction was firstly prepared and utilized as a novel photocathode material to construct a separated type cathode photoelectrochemical (STC-PEC) aptasensor for ultrasensitive and selective detection of thrombin (TB). Specifically, P5FIn/PEDOT heterojunction and TB aptamers in this PEC sensor were modified on different ITO electrodes to make the photoexcitation and biological recognition process separately. P5FIn/PEDOT heterojunction was prepared by simple two-step electrochemical polymerization and exhibited a strong photocurrent signal owing to the synergistic effect between P5FIn and PEDOT. This photocathode need not to be replaced in the PEC measurement improving the reproducibility. This construction strategy of the proposed sensor avoided the mutual interference between photoexcitation process and biological detection process, and effectively improved the sensitivity, reproducibility and stability of this PEC sensor. The proposed STC-PEC aptasensor had a detection range of 0.000100 nM–10.0 nM with a detection limit of 0.0410 pM, also showing an excellent applicability in the detection of TB in real human serum samples. This STC-PEC aptasensor not only has a good potential application in future clinical medical diagnosis and disease treatment but also provides new ideas for the development of PEC sensors.

chemistry, analytical
A dual-mode aptasensor for foodborne pathogens detection using Pt, phenylboric acid and ferrocene modified Ti3C2 MXenes nanoprobe

Wenhai Wang,Shu Xiao,Zhijian Jia,Hongzhen Xie,Tianhua Li,Qiqin Wang,Ning Gan

DOI: https://doi.org/10.1016/j.snb.2021.130839

2022-01-01

Abstract:Foodborne pathogens could result in serious health issues to public and thus some rapid analysis methods are urgent developed to monitor them. Herein, a dual-mode aptasensor based on electrochemical and colorimetric modes was constructed for the on-site detection of Vibrio parahaemolyticus (V.P) in shrimps as a model. A novel nanoprobe (@MXenes) was developed to generate both electrochemical and colorimetric signals by modifying phenylboronic acid and ferrocene on Pt-MXenes nanocomposite. The nanoprobe exhibited both features of peroxidase mimic and specific recognition. Simultaneously, a V.P aptamer-functionalized electrode interface was fabricated to firstly specifically capture V.P, then conjugated with @MXenes to form a sandwich complex. The complex could catalyze tetramethylbenzidine (TMB)-H2O2 to produce a visible signal, and generate electrochemical signal simultaneously. Under the optimal condition, the aptasensor could determine as low as 5 CFU mL−1 V.P by electrochemical mode and 30 CFU mL−1 V.P by colorimetric mode. These superior performances may be attributed to that the synergistic catalysis and conductive effects deriving from Pt and MXenes on the nanoprobe can significantly amplify the signals to improve detection sensitivity. In particular, the dual detection system could mutually verify to achieve high accuracy. The aptasensor could also be expanded to rapid analysis of other food-borne pathogens through changing the aptamer on the electrode.
An aptasensor for troponin I based on the aggregation-induced electrochemiluminescence of nanoparticles prepared from a cyclometallated iridium(III) complex and poly(4-vinylpyridine-co-styrene) deposited on nitrogen-doped graphene

Mohammad Saremi,Amir Amini,Hamid Heydari

DOI: https://doi.org/10.1007/s00604-019-3352-6

IF: 5.7

2019-03-22

Microchimica Acta

Abstract:An ultrasensitive electrochemiluminescence (ECL) disposable aptamer sensor (aptasensor) is presented for detection of myocardial infarction biomarker by quantification of troponin I in blood serum. A screen-printed electrode was modified with (a) aptamer-modified gold nanoparticles, (b) cyclometallated iridium(III)-poly-4-vinylpyridine nanoparticles, and (c) nitrogen-doped graphene in order to increase the loading capacity and conductivity of the aptasensor. If the aptasensor is exposed to troponin I, it will bind to the aptamer and desorb the aptamer from gold nanoparticles and the surface of the electrode. This generates an enhancement in ECL emission depending on troponin I concentration. ECL emission is strongly improved by aggregation-induced phenomenon, which is caused by inhibition of the water and oxygen quenching effect on the iridium complex ECL in aqueous media. Under optimum conditions, the aptasensor has a wide dynamic range that extends from 0.1 pM to 10 nM, with a 20 fM detection limit (S/N = 3) and a relative standard deviation of 3.1%. The ECL aptasensor was successfully applied to 20 individual human serum for the detection of troponin I biomarker.Graphical abstractSchematic presentation of electrochemiluminescence aptamer assay fabrication for detection of Troponin I. Carbon screen printed electrode (CSPE) was modified with nitrogen doped graphene (NG), gold nanoparticles (AuNPs), cyclometallated iridium(III)-polyvinylpyridine polymer nanoparticles, ionic liquid and bovine serum albumin.

chemistry, analytical
Disposable Poly (O-Aminophenol)-carbon Nanotubes Modified Screen Print Electrode-Based Enzyme Sensor for Electrochemical Detection of Marine Toxin Okadaic Acid

Jie Zhou,Xianxin Qiu,Kaiqi Su,Gaixia Xu,Ping Wang

DOI: https://doi.org/10.1016/j.snb.2016.05.067

IF: 9.221

2016-01-01

Sensors and Actuators B Chemical

Abstract:Based on the inhibition of okadaic acid (OA) on protein phosphatase 2A (PP2A), we developed disposable poly-o-aminophenol-carbon nanotubes (PoAP-CNTs) modified screen print electrode (SPE)-based electrochemical enzyme sensor for OA detection. Electropolymerized PoAP-CNTs composite film was coated on electrode for the immobilization of PP2A. Owing to the excellent physicochemical characteristic of PoAP-CNTs film, the performance of enzyme sensor was enhanced. Under the optimal conditions, the biosensor provides a larger linear range, and lower detection limit for the analysis of OA compared with colorimetric PP2A inhibition assay and PP2A/SPE. The spiked OA shellfish samples were applied to verify the efficiency of method for OA detection. The results shows acceptable recovery rate and low RSD, demonstrating the applicability of this method for in suit OA assessment in the quality and toxicity monitoring of seafood.
A sensitive and stable visible-light-driven photoelectrochemical aptasensor for determination of oxytetracycline in tomato samples

Fuheng You,Jie Wei,Yong Cheng,Zuorui Wen,Caifeng Ding,Yingshu Guo,Kun Wang

DOI: https://doi.org/10.1016/j.jhazmat.2020.122944

IF: 13.6

2020-11-01

Journal of Hazardous Materials

Abstract:Sensitive detection of Oxytetracycline (OTC) has attracted increasing attention worldwide due to the relationship between food safety and human health problems. In this work, a visible-light-driven photoelectrochemical (PEC) OTC aptasensor was constructed using Bi4VO8Cl/nitrogen-doped graphene quantum dots (Bi4VO8Cl/N-GQDs) nanohybrids as photoactive material and OTC aptamer as identification element. Owing to the well matched heterojunction of Bi4VO8Cl and nitrogen-doped graphene quantum dots (N-GQDs), the photogenerated electron-hole pairs could be separated effectively, so that the photocurrent intensity of as-prepared Bi4VO8Cl/N-GQDs nanohybrids was about 7 times higher than pure Bi4VO8Cl and had higher stability. The constructed "signal-off" PEC aptasensor realized OTC detection in tomato samples with excellent sensitivity, specificity and repeatability. The photocurrent decreased with the increase of OTC concentration in a range from 0.1 nM to 150 nM, and the detection limit was 0.03 nM (S/N = 3). The national standard method was used to compare with our method and the results were consistent.

environmental sciences,engineering, environmental
Rapid detection of tyrosinase in shrimp by polyacid-based electrochemical sensors

Xiao-Wen Chen,Yu-Shan Chen,Xiao-Mei Ding,Li Wang,Jing Liu,Rui-Fang Wang

DOI: https://doi.org/10.1007/s42864-022-00164-3

2022-07-29

Tungsten

Abstract:The increase through tyrosinase levels after shrimp death causes enzymatic browning, affecting the appearance and freshness of products, and it is essential to establish a simple and rapid method to detect tyrosinase in the aquatic product supply chain to control the market's good quality. In this study, we used a constant potential deposition method to create a [(Polystyrene Sodium Sulfonate (PSS)/Polypyrrole (PPy)) (P 2 Mo 17 Ni/PPy) 5 ] polystyrene sodium sulfonate polymetallic oxide thin film electrodes that can realize the detection of tyrosinase (TYR) in shrimp samples. The method yielded a limit of detection (Signal–Noise ratio ( S / N ) = 3) of 0.1028 U·mL −1 within the linear detection of 3.22–26.04 U·mL −1 , and the recoveries of the samples ranged from 96.37% to 102.40%. The above data confirmed that the method showed some accuracy in the detection of TYR content in shrimps and provided a theoretical basis for the preparation of tyrosinase sensors for the application of polyoxometalates in aquatic products.
A Label-Free Photoelectrochemical Aptasensing Platform Base on Plasmon Au Coupling with MOF-derived In2O3@g-C3N4 Nanoarchitectures for Tetracycline Detection

Yixuan Feng,Tao Yan,Tingting Wu,Ning Zhang,Qianqian Yang,Meng Sun,Liangguo Yan,Bin Du,Qin Wei

DOI: https://doi.org/10.1016/j.snb.2019.126817

2019-01-01

Abstract:A label-free photoelectrochemical (PEC) aptasensor for tetracycline (Tc) detection was successfully fabricated, and plasmon Au coupling with MOF-derived In2O3@g-C3N4 nanoarchitectures (AuInCN) with excellent PEC performance was employed as matrix for the first time. The homogeneous In2O3 nanoparticles (In(2)O(3 )NPs) derived from MIL-68(In) precursor were synthesized via calcination in air. The g-C3N4 nanosheets provided a favorable substrate for the fine distribution of In2O3 NPs. The In2O3@g-C3N4 (InCN) heterojunction with compact interface and matching band structure, facilitated the separation and transfer of electron-hole pairs. The surface plasmon resonance (SPR) of gold nanoparticles (Au NPs) could improve the light absorption and the photoelectron transfer of the modified electrode. Meanwhile, the decorated cysteamine stabilized Au NPs were also adequate to immobilize the SH-terminated aptamer as a biorecognition unit, and Tc molecules could be trapped through the specific interaction with the immobilized aptamer. An enhanced PEC photocurrent was realized under visible light illumination, due to the oxidation of captured Tc by photo-generated holes. Thereby, the concentration of Tc could be detected by observing the changes of photocurrent signals. Under optimized conditions, the PEC aptasensor exhibited the linear range from 0.01 nmol L-1 to 500 nmol L-1, with a detection limit (S/N = 3) of 3.3 pmol L-1. The prepared PEC aptasensor demonstrated acceptable stability, specificity and reproducibility, indicating the potential applications for the detection of Tc.

[Effect of carbon monoxide on cardiovascular system].

A Robust Colorimetric Aptasensor for the Label-Free Detection of Marine Toxins Based on Tyrosine-Capped Gold Nanoparticles.

An Amperometric Immunosensor Based on an Ionic Liquid and Single-Walled Carbon Nanotube Composite Electrode for Detection of Tetrodotoxin in Pufferfish.

Surface plasmon resonance enhanced real-time photoelectrochemical protein sensing by gold nanoparticle-decorated TiO₂ nanowires.

Photoelectrochemical aptasensor based on PTCDA/TiO 2 efficient sensitization effect for sensitive protein analysis

Visible light driven photoelectrochemical thrombin aptasensor based on uniform TiO2 nanotube arrays modified with CuOx and perylene-3,4,9,10-tetracarboxylic acid

Label-Free Fluorescent Aptasensor for Ochratoxin-A Detection Based on CdTe Quantum Dots and (N-Methyl-4-pyridyl) Porphyrin.

A sensitive label-free photoelectrochemical aptasensor based on a novel PTB7-Th/H2O2 system with unexpected photoelectric performance for C-reactive protein analysis

An electrochemical PAH-modified aptasensor for the label-free and highly-sensitive detection of saxitoxin

An Electrochemical Ti3C2Tx Aptasensor for Sensitive and Label-Free Detection of Marine Biological Toxins

Colorimetric and surface-enhanced Raman scattering dual-mode lateral flow immunosensor using phage-displayed shark nanobody for the detection of crustacean allergen tropomyosin

SOME TRIALS WITH 'ORFENSO', A NEW ANALGESIC.

A Competitive Photoelectrochemical Aptasensor for Thrombin Detection Based on the Use of TiO2 Electrode and Glucose Oxidase Label

An "on-off-on" electrochemiluminescence aptasensor based on a self-enhanced luminophore for ochratoxin A detection

A separated type cathode photoelectrochemical aptasensor for thrombin detection based on novel organic polymer heterojunction photoelectric material

A dual-mode aptasensor for foodborne pathogens detection using Pt, phenylboric acid and ferrocene modified Ti3C2 MXenes nanoprobe

An aptasensor for troponin I based on the aggregation-induced electrochemiluminescence of nanoparticles prepared from a cyclometallated iridium(III) complex and poly(4-vinylpyridine-co-styrene) deposited on nitrogen-doped graphene

Disposable Poly (O-Aminophenol)-carbon Nanotubes Modified Screen Print Electrode-Based Enzyme Sensor for Electrochemical Detection of Marine Toxin Okadaic Acid

A sensitive and stable visible-light-driven photoelectrochemical aptasensor for determination of oxytetracycline in tomato samples

Rapid detection of tyrosinase in shrimp by polyacid-based electrochemical sensors

A Label-Free Photoelectrochemical Aptasensing Platform Base on Plasmon Au Coupling with MOF-derived In2O3@g-C3N4 Nanoarchitectures for Tetracycline Detection