Abstract:To cope with sophisticated application scenarios, carbon materials can provide opportunities for integrating multi-functionalities into superior electromagnetic interference (EMI) shielding properties. Nevertheless, carbon materials usually possess high electrical conductivity, which allows them to counteract electromagnetic waves by reflection. Moreover, the identification of factors that dominate the shielding mechanisms has typically been result-oriented, leading to a reliance on a trial-and-error approach for the development of shielding materials. Thus, it is crucial to identify the dominant factors for EMI shielding and elucidate the mechanism underlying the coordination of the balance between reflection and absorption in carbon materials. In this study, we developed a promising and viable approach to create Co@CNTs embedded in carbonized wood (CW) via chemical vapor deposition, producing Co@CNTs/CW foams. The CNTs, densely grown on the CW surface, tightly encapsulated the Co nanoparticles within them. By manipulating the Co content, the defect density and CNT length varied within the Co@CNTs. Through first-principles calculations, these variations substantially influenced the work function, charge density, and dipole moment of the Co@CNTs. Thus, defect-induced and interfacial polarizations were improved, inducing a transformation of the shielding mechanism from reflection to absorption. Regarding the Co@CNTs/CW foams, while high conductivity was essential for achieving satisfactory shielding performance, the enhanced polarization loss dominated the contribution of absorption to the overall shielding effectiveness. Taking advantage of the enhanced polarizations, the Co@CNTs/CW foams exhibited an impressive shielding effectiveness of 42.0 dB, along with an absorptivity of 0.64, which were instrumental in effectively minimizing secondary reflections. Remarkably, these as-prepared foams possessed outstanding hydrophobicity and Joule heating features with a water contact angle of 138° and a saturation temperature of 85.5 °C (2.5 V). Through the stimulation of voltage-driven Joule heating, the absorptivity of Co@CNTs/CW foams can be significantly enhanced to a range of 0.61 to 0.73, irrespective of the Co content. This research would provide a new avenue for designing carbon materials with an absorption-dominated mechanism integrated into EMI shielding performance.

In-situ growth of MAX phase coatings on carbonised wood and their terahertz shielding properties

Characterization of Single- and Multiwalled Carbon Nanotube Composites for Electromagnetic Shielding and Tunable Applications

Enhanced polarization via Joule heating in wood-derived carbon materials for absorption-dominated EMI shielding

High-conductivity nickel shells encapsulated wood-derived porous carbon for improved electromagnetic interference shielding

Thermally stable carbon-coated SiC/polydimethylsiloxane nanocomposites for EMI shielding in the terahertz range

Ultrathin Carbon Foams for Effective Electromagnetic Interference Shielding

High Value Utilization of Waste Wood toward Porous and Lightweight Carbon Monolith with EMI Shielding, Heat Insulation and Mechanical Properties

Enhanced Electromagnetic Interference Shielding Properties of CNT/Carbon Composites by Designing a Hierarchical Porous Structure

3D Ti3C2Tx MXene/C Hybrid Foam/epoxy Nanocomposites with Superior Electromagnetic Interference Shielding Performances and Robust Mechanical Properties

Semi-transparent Biomass-Derived Macroscopic Carbon Grids for Efficient and Tunable Electromagnetic Shielding

MOF@wood Derived Ultrathin Carbon Composite Film for Electromagnetic Interference Shielding with Effective Absorption and Electrothermal Management

Carbonized Wood/Nickel Nanoparticle Composites with Oriented Channels for Enhanced Electromagnetic Interference Shielding

Electromagnetic interference shielding and microwave absorption materials: A virtual special issue

Wood-Derived Porous Carbon/Iron Oxide Nanoparticle Composites for Enhanced Electromagnetic Interference Shielding

Ultrathin Wood‐Derived Conductive Carbon Composite Film for Electromagnetic Shielding and Electric Heating Management

Creation of Wood‐Based Hierarchical Superstructures via In Situ Growth of ZIF‐8 for Enhancing Mechanical Strength and Electromagnetic Shielding Performance

In situ construction of biomass derived 3D carbon framework for efficient electromagnetic interference shielding and Joule heating performance

Constructing hierarchical structure via in situ growth of CNT in SiO2-coated carbon foam for high-performance EMI shielding application

3D graphene/ carbon nanotubes/ polydimethylsiloxane composites as high-performance electromagnetic shielding material in X-band

Electromagnetic wave absorption mechanism and wear corrosion characteristics of Ti3SiC2 MAX phase-doped Ni/AlN composite coating with core-shell structure based on laser cladding-induced pitaya-like multi-level heterogeneous interface

Heterointerface Engineering of β-Chitin/Carbon Nano-Onions/Ni–P Composites with Boosted Maxwell-Wagner-Sillars Effect for Highly Efficient Electromagnetic Wave Response and Thermal Management