Abstract:Low levelized cost of electricity (LCOE) has been identified as critical for widespread adoption of photovoltaics (PV) without subsidies. Maintaining decades-long high-energy production is often an under-recognized opportunity in meeting cost goals because component lifetimes are not fully quantified at the time of manufacture. Whereas certain standardized tests minimize risk of early failure, there is little guidance to quantitatively predict degradation (or lack thereof) over decades, based on accelerated tests. In this article, we move toward bridging the understanding between indoor accelerated tests and outdoor performance data, with the goal of predicting energy yield with enough accuracy to inform financial decisions. Light- and elevated temperature-induced degradation (LETID) in p-type Si modules is analyzed in terms of impact on long-term module performance and thus LCOE. A method to predict the progression of LETID, using fixed kinetic constants and a numerical solution to the basic reaction rate equations, is detailed. Predictions are compared against both published data and that new to this study. These data include both indoor accelerated tests and fielded modules. We use the results in financial models to derive LCOE of modules in different climates with varying amounts of LETID, including uncertainty. Cost models based on the predictions indicate that LETID has a significant and climate-dependent impact on LCOE. We show that—even given the uncertainties identified in the study—these financial calculations can provide useful guidance to quantify risk based on accelerated test results. The analysis serves as an example of developing a predictive approach to PV reliability using physics of failure. In recent years, deployment of photovoltaics (i.e., solar panels, or "PVs") has grown at an astounding rate: Global electricity generation from PVs has increased by a factor of nearly 30 in the past 10 years. This rapid expansion has been driven by both remarkable cost decreases and societal demand for decarbonization. Product durability and consumer confidence are key elements of maintaining a robust industry and low costs. It is thus necessary to augment current empirical methods of assessing PV reliability with more predictive and quantitative assessments. This article applies basic findings of solar-cell defect physics in a way that can help industry stakeholders estimate the financial impacts of PV panel reliability. Light and elevated temperature-induced degradation is analyzed in terms of impact on long-term module performance and levelized cost of electricity. The predictions generated in this work are compared against experimental data, both from indoor accelerated tests and from fielded modules. The approach of comparing a physical model to indoor and outdoor data sets, setting limits on uncertainty, then translating energy yield predictions to financial impacts, is generally applicable to any PV degradation mechanism.

Outdoor performance of organic photovoltaics: Diurnal analysis, dependence on temperature, irradiance, and degradation

Current Status of Outdoor Lifetime Testing of Organic Photovoltaics

Long‐term outdoor study of an organic photovoltaic module for building integration

Outdoor Performance Monitoring Method for Degradation Studies of Perovskite Modules

A Comparative Investigation on Outdoor and Laboratory Test of the Degradation Rates for Different Types of Photovoltaic Modules with Different Exposure Periods

Investigation of the power generation of organic photovoltaic modules connected to the power grid for more than three years

Analyzing the outdoor degradation behavior of organic solar modules in North China

Seasonal Effects on Outdoor Stability of Perovskite Solar Cells

Worldwide Outdoor Round Robin Study of Organic Photovoltaic Devices and Modules

Performance analysis of partially shaded high-efficiency mono PERC/mono crystalline PV module under indoor and environmental conditions

Operational Performance and Degradation of PV Systems Consisting of Six Technologies in Three Climates

Insights into the photovoltaic mechanism of organic photovoltaics under solar and artificial light

Long-term impact of light- and elevated temperature-induced degradation on photovoltaic arrays

Optical degradation impact on the spectral performance of photovoltaic technology

1 cm2 Organic Photovoltaic Cells for Indoor Application with over 20% Efficiency

Performance and degradation analysis for long term reliability of solar photovoltaic systems: A review

Six‐Month Outdoor Performance Study of Stable Perovskite Solar Cells under Real Operating Conditions

Performance Evaluation Method of Organic Photovoltaics under Indoor Light Condition

Energy performance of commercial c-Si PV modules in accordance with IEC 61853-1, -2 and impact on the annual specific yield

Unveiling the Low‐Temperature Pseudodegradation of Photovoltaic Performance in Planar Perovskite Solar Cell by Optoelectronic Observation

Influence of the Hole Transporting Layer on the Thermal Stability of Inverted Organic Photovoltaics Using Accelerated Heat Lifetime Protocols