Abstract:Journal of Thermoplastic Composite Materials, Ahead of Print. To expand the potential applications of polylactic acid (PLA), it is essential to incorporate a highly flexible polymer into the blend. Polycaprolactone (PCL) is an ideal choice due to its ductility and biodegradability. However, blending PLA with PCL resulted in weak mechanical properties. To address this issue, glycidyl methacrylate (GMA) and nano calcium carbonate (NCC) were introduced to enhance the adhesion at the interface between PLA and PCL. Scanning Electron Microscope (SEM) images provided clear visual evidence of the impact of GMA and NCC on the morphology of the blend. Both components were effective in reducing the size of the dispersed PCL phase, shrinking it to approximately half the size of the original blend. Spectroscopic analysis revealed that GMA caused a reaction between its epoxy group and the hydroxyl and carboxyl groups of PLA and PCL. This reaction led to the formation of strong peaks in the 6.5 to 7.5 range in 1H NMR, as well as peaks at 76 and 139 ppm in 13C NMR. These findings were further corroborated by FT-IR, which demonstrated that NCC, despite its surface coating, did not create any new bonds. Rheological studies further demonstrated the positive effects of GMA and NCC. Both the storage modulus (G′) and complex viscosity (η*) of the blends increased, showing improved post-processing performance. Investigation into the shear-thinning behavior of the uncompatibilized blends revealed that NCC caused a significant decrease in complex viscosity at higher frequencies, indicating the disruption of the nanoparticle network. The power-law slope was measured to be 0.62. In contrast, the blend containing the compatibilizer demonstrated a moderate decrease in viscosity, with a power-law slope of 0.36. To analyze the behavior of the PLA/PCL blends in the presence of compatibilizers and nanoparticles at intermediate frequencies, the Palirene model was utilized. The superior integrity of the compatibilized blend was effectively demonstrated by the model, which showed enhanced stress transfer and phase relaxation.

Graphite nanoplatelets-modified PLA/PCL: Effect of blend ratio and nanofiller localization on structure and properties

Atomistic Insights on the Rheological Property of Polycaprolactone Composites with the Addition of Graphene

Poly(lactic acid)/ poly(ε-caprolactone) blends: the effect of nanocalcium carbonate and glycidyl methacrylate on interfacial characteristics

Poly(lactic acid)/poly(ε-caprolactone) blends: Separate effects of nanocalcium carbonate and glycidyl methacrylate on interfacial characteristics

Carbon nanotubes-filled polylactic acid/polycaprolactone biodegradable blends: Effect of the polycaprolactone viscosity and carbon nanotubes addition on the microstructure, electrical and mechanical properties

Enhancing Polylactic Acid Properties with Graphene Nanoplatelets and Carbon Black Nanoparticles: A Study of the Electrical and Mechanical Characterization of 3D-Printed and Injection-Molded Samples

Preparation and characterization of poly (lactic acid) (PLA)/polyamide 6 (PA6)/graphene nanoplatelet (GNP) blends bio-based nanocomposites

Effects of carbon‐based nanoparticles on the properties of poly(lactic acid) hybrid composites containing basalt fibers and carbon‐based nanoparticles processed by injection molding

Carbon fiber reinforced poly(lactic acid) composites: Investigation the effects of graphene nanoplatelet and coupling agent addition

Investigation of the Effect of Hybrid Nanofiller on the Mechanical Performance and Surface Properties of Bio-Based Polylactic Acid/Polyolefin Elastomer (PLA/POE) Blend

Experimental investigation on mechanical properties of nanocomposites based on poly lactic acid/ polyolefin elastomer reinforced with multi-walled carbon nanotubes, and graphene nanoplatelets

High performance poly(lactic acid)/poly(ether-block-amide) blend-based bionanocomposites containing carbon nanotubes and/or organoclay

Phase Structure, Compatibility, and Toughness of PLA/PCL Blends: A Review

Enhancing polypropylene composites: synergistic effects of graphene nanoplatelets and glass fibers on mechanical and thermal properties

Cellulose Nano Crystal/Graphene Nano Platelets Hybrid Nanofillers reinforced Polylactic Acid Biocomposites: Mechanical and Morphological Properties

Preparation of poly(lactic acid) grafted glycidyl neodecanoate by solid phase grafting and its compatibilization for poly(lactic acid)/poly(butylene adipate‐co‐terephthalate) composite

Graphene Nanoplatelets or Polylactic Acid Conductive Polymer Composites: Tensile, Thermal and Electrical Properties

The synergistic effects of micro-and nano-fillers on the properties of polyamide 11/poly (lactic acid) blend

Enhanced Mechanical and Multifunctional Properties of GNPs/CNTs Hybridized PLA Nanocomposites by Implementing Dual‐Processing of Pickering Emulsion‐Melt Blending Methods

A comparison of physical, morphological, and mechanical properties of bio‐polyester hybrid nanocomposites

Enhanced dielectric and mechanical properties of polylactic acid/polycaprolactone blends by introducing double‐layer carbon nanofillers