Abstract:The rate-determining step of the photoelectrochemical (PEC) water splitting is the water oxidation reaction at the photoanode, which is 4 orders of magnitude slower than the water reduction reaction at the photocathode. In a conventional process to accelerate the water oxidation, oxygen evolution cocatalysts (OECs) are usually used on the surface of a photoanode. As an alternative strategy, we considered employing a composite photoanode made up of a semiconductor and carbon spheres, for it is expected that the photogenerated electrons on the semiconductor particles can be captured by the carbon spheres as electron reservoirs and leave the photogenerated holes on the surface of the semiconductor particles, which promotes the effective separation of photogenerated electrons and holes. More importantly, the holes accumulated in the valence band accelerate the water oxidation reaction rate with the rapid release of electrons stored on the carbon sphere. Therefore, the composite photoanode achieves a higher photocurrent at a lower applied bias. We provide a proof of concept for this strategy by preparing a composite photoanode by combining bismuth vanadium oxide BiVO4 with carbon spheres and find that the resulting photoanode displays a remarkable enhancement in the rate of the photoanode water oxidation.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acscatal.0c03671?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acscatal.0c03671</a>.TEM image of CSs and SEM image of a special C-BVO sample; top-view SEM images of BVO and C-BVO photoanodes; HRTEM image of the as-prepared C-BVO photoanode; Tauc plots of BVO and C-BVO based on the diffuse reflectance spectra; DRS of BVO containing different amounts of CSs and zoomed-in view of the absorption spectra; cyclic voltammograms of the BVO and C-BVO photoanodes under dark and light and the charge–discharge curve of the C-BVO photoanode under dark and light; surface potential mapping of the BVO and C-BVO photoanodes; cyclic voltammograms and calculated specific capacitances of 0.25C-BVO, 0.5C-BVO, C-BVO, and 2C-BVO photoanodes; J vs V curves measured for the BVO, C-BVO, and CoPi-BVO photoanodes and for BVO photoanodes containing different amounts of CSs; J vs V diagrams of three additional BVO and C-BVO photoanodes; comparison of the AM 1.5G sunlight spectrum and UV–vis absorption spectra of the BVO and C-BVO photoanode; close-ups of the stability tests of BVO and C-BVO photoanodes; transient open circuit voltage vs time plots of BVO and C-BVO photoanodes measured at light and dark; measured H2/O2 evolution of C-BVO and BVO photoanodes; J vs V plots of BVO and C-BVO photoanodes measured in KPi and KPi + NaVO3 solution and tested at 0.9 V vs RHE in KPi and KPi + NaVO3 solution; comparison of the J vs V plots of BVO photoanodes compounded with carbon quantum dots and carbon spheres; model diagrams of the specific mechanism of charge and discharge of the C-BVO photoanode and a possible mechanism on the enhancement of the PEC water oxidation of the C-BVO photoanode; and separation and injection efficiencies of BVO and CQD-modified BVO photoanodes (<a class="ext-link" href="/doi/suppl/10.1021/acscatal.0c03671/suppl_file/cs0c03671_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Photoanode with Enhanced Performance Achieved by Coating BiVO4 onto ZnO-Templated Sb-Doped SnO2 Nanotube Scaffold

High Light Absorption and Charge Separation Efficiency at Low Applied Voltage from Sb-Doped SnO2/BiVO4 Core/Shell Nanorod-Array Photoanodes

Dual Modification of BiVO4 Photoanode by Enriching Bulk and Surface Oxygen Vacancies for Enhanced Photoelectrochemical Performance.

Interface Modulation of BiVO4 Based Photoanode with Bi(III)Bi(V)O4 for Enhanced Solar Water Splitting

Photoelectrochemical Performance Improving Mechanism: Hybridization Appearing at the Energy Band of BiVO 4 Photoanode by Doped Quantum Layers Modification

High-performance BiVO4 photoanodes cocatalyzed with bilayer metal–organic frameworks for photoelectrochemical application

Nanoporous BiVO4 Photoanodes with Dual-Layer Oxygen Evolution Catalysts for Solar Water Splitting

Promoting the Photoelectrochemical Properties of BiVO4 Photoanode via Dual Modification with CdS Nanoparticles and NiFe-LDH Nanosheets

Rational Design of 3D Hierarchical Ternary SnO2/TiO2/BiVO4 Arrays Photoanode toward Efficient Photoelectrochemical Performance

SnS2 Nanoparticles Embedded in BiVO4 Surfaces via Eutectic Decomposition for Enhanced Performance in Photoelectrochemical Water Splitting

High-Performance BiVO4 Photoanodes: Elucidating the Combined Effects of Mo-Doping and Surface-Modification with Polyoxometalate Co-Catalysts

Dual Heterojunctions and Nanobowl Morphology Engineered BiVO4 Photoanodes for Enhanced Solar Water Splitting

Highly Efficient Photoelectrochemical Water Splitting from Hierarchical WO3/BiVO4 Nanoporous Sphere Arrays.

Boosting the Photoactivity of BiVO4 Photoanodes by a ZnCoFe-LDH Thin Layer for Water Oxidation

High-performance bismuth vanadate photoanodes cocatalyzed with nitrogen, sulphur co-doped ferrocobalt-metal organic frameworks thin layer for photoelectrochemical water splitting

De‐Pinning Fermi Level and Accelerating Surface Kinetics with an ALD Finish Boost the Fill Factor of BiVO4 Photoanodes to 44%

Organic ligand nanoarchitectonics for BiVO4 photoanodes surface passivation and cocatalyst grafting

New BiVO4 Dual Photoanodes with Enriched Oxygen Vacancies for Efficient Solar-Driven Water Splitting

Enhancing the Photoelectrochemical Water Oxidation Reaction of BiVO 4 Photoanode by Employing Carbon Spheres as Electron Reservoirs

Nanostructured BiVO4 Photoanodes Fabricated by Vanadium-infused Interaction for Efficient Solar Water Splitting

Dramatically enhanced solar-driven water splitting of BiVO4 photoanode via strengthening hole transfer and light harvesting by co-modification of CQDs and ultrathin β-FeOOH layers