Abstract:Ultrasonic imaging is one of the most important and still growing diagnostic tools today. Ultrasonic imaging is more appealing as a clinical imaging modality compared to such imaging modalities as magnetic resonance imaging (MRI), nuclear imaging, and x-ray computed tomography (CT) in that it is more cost-effective, non-invasive, capable of real-time operation, and portable while providing images of comparable quality and resolution. State-of-the-art ultrasonic scanners offer real-time gray scale images of anatomical detail with millimeter spatial resolution superimposed on which is a map of Doppler blood flow information displayed in color. Clinical applications of these devices are still expanding and the operating frequencies of these devices seem to inch higher and higher. High frequency (HF) ultrasound (>20 MHz) yields improved spatial resolution at the expense of a shallower depth of penetration. There are a number of clinical problems that may benefit from high frequency ultrasonic imaging. Intravascular imaging with probes mounted on catheter tips at frequencies higher than 20 MHz with the highest frequency being 60 MHz has been used to characterize atherosclerotic plaque and to guide stent placement and angioplastic procedures. The medical efficacy of ultrasonic imaging of anterior segments of the eye at frequencies higher than 50 MHz in diagnosing glaucoma and ocular tumors and in assisting refractive surgery has been demonstrated. Applications in dermatology for defining tumor involvement and for monitoring treatment, in vascular surgery for characterizing atherosclerotic plaques, and in small animal imaging are also being investigated. To further expand the role of HF ultrasound, probe performance must be improved since current HF ultrasound imaging devices, dubbed “ultrasound biomicroscopes” or “UBMs” by a number of investigators use mechanically scanned single element transducers. Compared to electronic scanning with linear arrays, mechanical scanning of a single element transducer has three major drawbacks: poorer resolution, slower frame rate, and motion of the probe. Single element transducers can only produce beams with a fixed focus which means the spatial resolution of the device is best only within the depth of focus, i.e., in a very tight zone and degrades rapidly beyond the focal point. Mechanical motion of the transducer limits the frame rate, is unreliable, and may cause discomfort and, at worst, hazard to the patient. My presentation will introduce several HF ultrasound transducers currently being developed by the NIH Transducer Resource Center at the University of California. Emphasis will be placed on the construction and implementation of high frequency array transducers. Learning Objectives: 1. Familiarize audience with high frequency ultrasound transducers and their applications.

Pre-clinical investigations of multi-path propagation in transcranial Doppler ultrasound flow phantom

A wall-less poly(vinyl alcohol) cryogel flow phantom with accurate scattering properties for transcranial Doppler ultrasound propagation channels analysis

Transcranial ultrafast ultrasound Doppler imaging: A phantom study

Investigation of 3D vessel reconstruction under Doppler imaging with phantoms: Towards reconstruction of the Circle of Willis

Patient-Specific Vascular Flow Phantom for MRI- and Doppler Ultrasound Imaging

A Multimodal Phantom for Visualization and Assessment of Histotripsy Treatments on Ultrasound and X-Ray Imaging

Design and simulation of a 2-D array flexible ultrasound transducer system for tissue characterization – A pilot study

TU-D-210A-04: Development of High Frequency Ultrasound Transducers for Medical Imaging

Advancing preclinical micro-photon counting CT perfusion imaging: from phantom experiments to in vivo applications

Experimental Study of a Simulated Blood Flow Velocity Measurement System Via Very-High-Frequency Ultrasound

3-D Stochastic Numerical Breast Phantoms for Enabling Virtual Imaging Trials of Ultrasound Computed Tomography

Noncontact 3-D Speckle Contrast Diffuse Correlation Tomography of Tissue Blood Flow Distribution

Study on a Digital Doppler Ultrasonic Blood Flow Measurement System

Surface Point Cloud Ultrasound with Transcranial Doppler: Coregistration of Surface Point Cloud Ultrasound with Magnetic Resonance Angiography for Improved Reproducibility, Visualization, and Navigation in Transcranial Doppler Ultrasound

Ultrasound Speckle Decorrelation Analysis‐Based Velocimetry for 3D‐Velocity‐Components Measurement Using a 1D Transducer Array

Generating Patient-Specific Acoustic Simulations for Transcranial Focused Ultrasound Procedures Based on Optical Tracking Information

A 4D digital phantom for patient-specific simulation of brain CT perfusion protocols.

Spiral Flow Phantom for Ultrasound Flow Imaging Experimentation

Dual-Probe Transcranial Full-Waveform Inversion: A Brain Phantom Feasibility Study

Blood Flow Simulation, Patient-Specificin-vivo

Ray Theory-Based Transcranial Phase Correction for Intracranial Imaging: A Phantom Study