Abstract:Green corrosion inhibitors have an important role in reducing the corrosion rate of metals and the effects of toxic chemicals in the environment. In this study, the inhibition effect of pomegranate peel extract ( PPE ) with concentration of 0.5, 1, 1.5, 2, 2.5 and 3 g/L on the aluminum 1050 alloy corrosion behavior in the nitric acid solution investigates using the weight loss, electrochemical techniques, scanning electron microscope ( SEM ), atomic force microscope ( AFM ), contact angle images, gas chromatography-mass spectrometer ( GC-MS ) analysis, fourier transform Infrared spectroscopy ( FTIR ) and ultraviolet radiation ( UV-IR ). And, the ( UV-IR ), ( GC-MS ), and FTIR results confirm the presence of many organic compounds (Containing the N , S , and O atoms), which are responsible for inhibitor performance and absorption phenomena. Meanwhile, the electrochemical impedance results ( EIS ) indicate that the double layer capacity decreases and the corrosion resistance (Corrosion current density ( i corr ) from 0.128 to 0.009 mA/cm 2 ) increases with the increase of the inhibitor concentration (The inhibition efficiency increased with increasing the inhibitor concentration from % 54.29 to the % 92.58 at (1 to 3 g/L ). In addition, the corrosion current density decreases with the increase of the inhibitor concentration using the potentiodynamic polarization ( PDP ) test. However, the corrosion rate enhances with increasing the temperature. From the other hand, quantum chemical ( QC ) calculation and molecular dynamics ( MD ) simulation perform to investigate the theory of the adsorption mechanism. According to these studies, the adsorption of PPE on the aluminum 1050 alloy surface is agreement with the langmuir isotherm and as a result it is a mixed-type inhibitor. In final the SEM and AFM results show that the corrosion rate of the aluminum 1050 alloy surface is significantly reduced after the addition of the inhibitor to the corrosive environment. Furthermore, the contact angle image shows that the inhibited aluminum surface has a hydrophobic property in an aqueous solution. And, the QC calculation and MD simulation clarify well the thin layer formation due to the good adsorption of inhibitor (PPE) on the surface of aluminum 1050 alloy in the nitric acid solution, theoretically. It is concluded that PPE will inhibit the surface of aluminum against the corrosion agents in acidic environment and can use as a green inhibitor.

Modification and Application of Walnut Peel Extract as Acidic Corrosion Inhibitor

A new study on the corrosion inhibition mechanism of green walnut husk extract as an agricultural waste for steel protection in HCl solution

Theoretical (atomic-DFT&molecular-MD), surface/electrochemical investigations of walnut fruit green husk extract as effective-biodegradable corrosion mitigating materials of a steel electrode in 1M HCl electrolyte

Theoretical and surface/electrochemical investigations of walnut fruit green husk extract as effective inhibitor for mild-steel corrosion in 1M HCl electrolyte

Exploration of Walnut Green Husk Extract As a Renewable Biomass Source to Develop Highly Effective Corrosion Inhibitors for Magnesium Alloys in Sodium Chloride Solution: Integrated Experimental and Theoretical Studies

Longan Seed and Peel As Environmentally Friendly Corrosion Inhibitor for Mild Steel in Acid Solution: Experimental and Theoretical Studies.

Synergistic Effect of Walnut Green Husk Extract Complex Inhibitors on Steel in Citric Acid

Study on the Corrosion Inhibitory Performance of Pomacea Canaliculata Extract As a Corrosion Inhibitor for Carbon Steel in Acidic Environments

Performance of corrosion inhibitor extracted from enzymatic hydrolysate of waste platanus acerifolia leaves

Molecular Dynamic Simulation, Quantum Chemical Calculation and Electrochemical Behaviour of Punica Granatum Peel Extract As Eco-Friendly Corrosion Inhibitor for Stainless Steel (SS-410) in Acidic Medium

Novel eco-friendly green inhibitor of corrosion based on Acerola ( Malpighia glabra) waste aqueous extract for mild steel in 1 mol L –1 HCl solution

Corrosion Protection for Mild Steel by Extract from the Waste of Lychee Fruit in HCl Solution: Experimental and Theoretical Studies.

Insight into anti-corrosion behavior of protein extract as eco–friendly corrosion inhibitor

The effect of the Oğuzlar walnut extract as a green corrosion inhibitor on AISI 1010 mild steel

A study of pomegranate peel extract effect on corrosion inhibition performance on aluminum in HNO 3 solution

Experimental and Computational Exploration of the Biodegradable Platanus Acerifolia Leaf Extract Against Mild Steel Corrosion in Hydrochloric Acid

Aqueous Extract of Punica Granatum Fruit Peel as an Eco-Friendly Corrosion Inhibitor for Aluminium Alloy in Acidic Medium

Seaweed Extract As Green Corrosion Inhibitor for Carbon Steel in Hydrochloric Acid Solution

A novel green reinforcement corrosion inhibitor extracted from waste Platanus acerifolia leaves

Experimental and Quantum Chemical Studies of a Green Corrosion Inhibitor for Mild Steel in Acidic Chloride Solution

Synergistic Inhibition Effect of Walnut Green Husk Extract and Sodium Lignosulfonate on the Corrosion of Cold Rolled Steel in Phosphoric Acid Solution