Abstract:Organometal trihalide perovskites are emerging as a new generation of photovoltaic materials. They are abundant in nature and have rapidly increasing power conversion efficiencies (PCE) of above 15% in common hybrid (mixed organic/inorganic) thin-film-based solar cells.1–3 Up to now, perovskite films have been formed by film deposition approaches such as spin-coating, sequential deposition of the inorganic and organic precursor, and co-evaporation of the precursors.1, 2 Low-temperature solution processes are among the simplest ways to fabricate planar low-cost photovoltaic devices. However, perovskite crystallizes very rapidly, so it is very challenging to form uniform, continuous, and leakage-free perovskite films by solution methods.2 We developed two simple and effective low-temperature solution processes to fabricate high-efficiency perovskite devices (see Figure 1). In the first approach, we studied the influence of the ratio of the precursors methylammonium iodide (CH3NH3I) and lead iodide (PbI2) in a premixed solution. 3 We found that using a non-stoichiometric precursor solution (i.e., not in a simple ratio) was critical to forming stoichiometric (i.e., in a simple ratio) perovskite films. The compositions of the spun perovskite films were very sensitive to the substrate surface, and could be very different from those of the precursor solutions. We varied the composition of the precursor solution, and found a PbI2/CH3NH3Xmolar ratio of 0.6–0.7 gave the best surfacemorphology and electronic properties, such as doping concentration. We used a planar heterojunction device structure of ITO/ PEDOT:PSS/(CH3NH3I)/PCBMor ICBA/C60/BCP/aluminum, where ITO is a substrate of indium tin oxide, PEDOT:PSS is an electron-donating transparent conductive polymer, PCBM and ICBA are fullerene-derived electron acceptors, C60 is buckminsterfullerene (a spherical fullerene molecule), and BCP is 2,9-dimethyl-4,7-diphenyl-1,10-phenanthroline, an electrontransporting but hole-blocking layer. Figure 1. Schematic of the prepation of perovskite films by (a) spin coating of pre-mixed precursor of lead iodide (PbI2) and methylammonium iodide (CH3NH3I) and (b) an interdiffusion approach. ITO: Indium tin oxide, a transparent conducting oxide. PEDOT:PSS: A transparent, conductive polymer. MAI: Methylammonium iodide. MAPbI3 Methylammonium lead iodide.

Perovskite films prepared by solvent volatilization via DMSO-based intermediate phase for photovoltaics

Collaborative Fabrication of High-Quality Perovskite Films for Efficient Solar Modules through Solvent Engineering and Vacuum Flash System

Combined Vacuum Evaporation and Solution Process for High‐Efficiency Large‐Area Perovskite Solar Cells with Exceptional Reproducibility

Enhanced Homogeneity in Perovskite Photovoltaic Films via Antisolvent Extraction of a Methylamine-Based Gel Precursor

Remanent solvent management engineering of perovskite films for PEDOT: PSS-based inverted solar cells

Spontaneously supersaturated nucleation strategy for high reproducible and efficient perovskite solar cells

Perovskites Fabricated with Volatile Anti-Solvents for More Efficient Solar Cells

Preperation of Perovskite Materials and Perovskite Solar Cells by Vapor-Assisted Solution Process

Solvent engineering towards scalable fabrication of high-quality perovskite films for efficient solar modules

Volatile Dual-Solvent Assisted Intermediate Phase Regulation for Anti-Solvent-Free Perovskite Photovoltaics.

Controllable Crystallization of Perovskite Films during the Blade-Coating Fabrication Process for Efficient and Stable Solar Cells

Preparing High-Efficiency Perovskite Solar Cells

Eco-Friendly Solvent Engineered CsPbI2.77 Br0.23 Ink for Large-Area and Scalable High Performance Perovskite Solar Cells

Vapor-assisted solution process for perovskite materials and solar cells

Fabrication of Perovskite Films with Large Columnar Grains Via Solvent-Mediated Ostwald Ripening for Efficient Inverted Perovskite Solar Cells

Highly Reproducible Fabrication of Perovskite Films with an Ultrawide Antisolvent Dripping Window for Large‐Scale Flexible Solar Cells

The Characteristics of Perovskite Solar Cells Fabricated Using DMF and DMSO/GBL Solvents

Scalable Fabrication of High‐Performance Perovskite Solar Cell Modules by Mediated Vapor Deposition

Solution-processed perovskite solar cells using environmentally friendly solvent system

A universal co-solvent dilution strategy enables facile and cost-effective fabrication of perovskite photovoltaics

Solvent-vapor assisted conversion process for hybrid perovskites coupling thermal evaporation and slot-die coating