Abstract:Since municipal solid waste incineration bottom ash (MSWIBA) contains some heavy metals that are harmful to the groundwater and soil, this study proposes an effective and new approach to deal with high-volume MSWIBA. Selecting 70% MSWIBA, 10% ordinary Portland cement (OPC), 10% fly ash/ground granulated blast furnace slag (FA/GGBFS), and 1% volume of polypropylene (PP) fiber as the raw materials, this project designed and manufactured cold-bonded fiber aggregates (CBFAs) and applied them into sustainable concrete. It was found that the water absorption of CBFAs was between 12 and 14%, the bulk density was between 900 and 1100 kg/m3, and the compressive strength of single particle was greater than 1.8 MPa. And it was found that the mechanical strength and bulk density of CBFAs were positively correlated, while the mechanical strength and water absorption were negatively correlated. The leaching behaviors of CBFAs on Cu, Pb, Cd, and Cr were successfully suppressed to less than 1% of that originally from MSWIBA, which can be in line with the Chinese standards. Additionally, it is also found that the green concrete with adding GGBFS-CBFAs has higher overall fluidity and better mechanical properties than the concrete with FA-CBFAs. The mechanical properties of concrete were the best under the replacement rate of 60% of CFBAs, and the strength of green concrete added with GGBFS-CBFAs reached 96% of that of ordinary concrete. In this study, the rapid chloride ion penetration test, mercury intrusion and electron microscope tests found that the bonding effect between the CBFAs and the green concrete matrix was better, and the pore structure in the transition zone of the surrounding interface was refined. The proportion of transition pores in the pore structure was up to 59%. This shows that the concrete added with CBFAs has better resistance to chloride ion diffusion, and has some improvement on the durability. This research suggests that CBFAs including high volume MSWIBA has the potential to be successfully applied as the alternative to natural aggregates in sustainable concrete, and this can also advance waste recycling, and solidify high volume heavy metals in infrastructures.

Utilization of Municipal Solid Waste Incineration Bottom Ash in Cement-Bound Mixtures

Feasibility Analysis For Utilization Of Sewage Sludge Incineration Ash As Cement Replacement

The Effect of Milled Municipal Solid Waste Incineration Bottom Ash on Cement Hydration and Mortar Properties

Utilization of incineration bottom ash, waste marine clay, and ground granulated blast-furnace slag as a construction material

Assessment of a Municipal Solid Waste Incinerator Bottom Ash as a Candidate Pozzolanic Material: Comparison of Test Methods

Enhancing Mechanical Performance and Durability of High Strength Mortar with Incineration Bottom Ash Via Al2O3 Micro-Powder: an Experimental Study

Utilization of Municipal Solid Waste Incineration Bottom Ash as Fine Aggregate of Cement Mortars

Performance studies of fiber-reinforced municipal solid waste incineration bottom ash amended with cement for Geotechnical applications

Recycling of Municipal Solid Waste Incineration By-Product for Cement Composites Preparation

Mine Tailings and Bottom Ash from Waste Incineration as Alternative Fine Aggregates for Controlled Low-Strength Materials

Valorization of municipal solid waste incineration bottom ash (MSWIBA) into cold-bonded aggregates (CBAs): Feasibility and influence of curing methods

Reuse potential of municipal solid waste incinerator bottom ash as secondary aggregate: Material characteristics, persistent organic pollutant content and effects of pH and selected environmental lixiviants on leaching behaviour

Feasibility of Preparing Self-Compacting Mortar Via Municipal Solid Waste Incineration Bottom Ash: an Experimental Study

Recovery of MSWI and soil washing residues as concrete aggregates

Feasibility study on utilization of municipal solid waste incineration bottom ash as aerating agent for the production of autoclaved aerated concrete

Novel recycling application of high volume municipal solid waste incineration bottom ash (MSWIBA) into sustainable concrete

Synthetic aggregates from combustion ashes using an innovative rotary kiln

The Multifaceted Comparison of Effects of Immobilisation of Waste Imperial Smelting Furnace (ISF) Slag in Calcium Sulfoaluminates (CSA) and a Geopolymer Binder

Recycle Option for Municipal Solid Waste Incineration Fly Ash (MSWIFA) as a Partial Replacement for Cement in Mortars Containing Calcium Sulfoaluminate Cement (CSA) and Portland Cement to Save the Environment and Natural Resources

A review on the utilization of municipal solid waste incineration (MSWI) bottom ash as a mineral resource for construction materials

Assessment of Pb-slag, MSWI bottom ash and boiler and fly ash for using as a fine aggregate in cement mortar