Abstract:Thermal shrinkage has for long been a critical issue in nonwoven industrial applications. A dimensionally stable nonwoven web with excellent mechanical property was achieved by heat treatment with tension [taut annealed (TA)] instead of annealing under free state [free annealed (FA)], while the original high porosity was not affected. To better understand the fundamental structure-property relationship, these two different heat treatments' effects on the thermal behaviors, morphology, and phase structures of poly(phenylene sulfide) (PPS) nonwovens were elucidated via a combination of different experimental techniques such as temperature-modulated differential scanning calorimetry (DSC), two-dimensional wide-angle X-ray diffraction, two-dimensional small-angle X-ray scattering, and polarized Raman spectroscopy. It is evidenced that no obvious online stress-induced crystallization occurs during the melt-blowing process, making virgin PPS fibers mostly in the amorphous state. However, experimental results confirm that a certain amount of mesophase or constrained amorphous exists in the virgin PPS fibers without any presence of crystallites. After annealing, the DSC melting curves of both TA and FA PPS nonwovens exhibit endothermic annealing peaks, the origin of which is interpreted as the relaxation and devitrification of the rigid amorphous phase. However, the annealing peak position of the FA sample is always higher than that of the TA sample, which is reported for the first time. As compared with the FA sample annealed at the same temperature, TA PPS nonwovens reveal lower crystallinity and slightly larger lamellar long period (L-p) but a higher level of macroscopic fiber alignment and molecular chain orientation. These morphology and microstructure differences provide a good explanation for the superior mechanical property of TA PPS nonwovens with higher elastic modulus and tensile strength. The results are helpful in deepening the understanding of essential physical pictures of PPS nonwovens and promoting the development of the high-temperature nonwoven industry.

Effects of Heat Treatments on Puncture Resistant Properties of Polyamine and Polyamide-based Nonwoven Fabrics

Stab/Puncture Resistance Performance of Needle Punched Nonwoven Fabrics: Effects of Filament Reinforcement and Thermal Bonding

Recent research developments of textile flexible structures with high puncture resistance: A review

Evaluation of high-modulus, puncture-resistance composite nonwoven fabrics by response surface methodology

Effects of needle-punched nonwoven structure on the properties of sandwich flexible composites under static loading and low-velocity impact

Fabric Composites Reinforced with Thermally Bonded and Irregularly Aligned Filaments: Preparation and Puncture Resistant Performance

Puncture-resisting, sound-absorbing and thermal-insulating properties of polypropylene-selvages reinforced composite nonwovens

Process Technology and Performance Evaluation of Nylon 6/PU Stab Resistance Fabric Matrix

Effects of needle punching and hot pressing on mechanical properties of composite geotextiles

Synergistic Effects of Needle Punching and Shear-Thickening Fluid on Sandwich-Structured Composites Made of Nonwoven and Woven Fabrics

Heat-setting Effect on the Morphology and Phase Structures of PPS Nonwovens

Impact resistance of fiber reinforced sandwich-structured nonwoven composites: Reinforcing effect of different fiber length

Thermal Protective Performance of Heat-Resistant Fabrics in Various High Intensity Heat Exposures

Effect of Hot-Pressing Process on Mechanical Properties of UHMWPE Fiber Non-Woven Fabrics

Development of a high-density nonwoven structure to improve the stab resistance of protective clothing material

The Effect of Stitch Density and Stitching Patterns on the Puncture Resistance of High Strength Plain Woven Fabric

Using recycled high-strength polyester and Kevlar® wastes to reinforce sandwich-structured nonwoven fabric: Structural effect and property evaluation

Static and dynamic puncture properties of intra-/inter-laminar reinforced multilayer compound fabrics by needle-punching and thermal bonding

Static and dynamic puncture failure behaviors of 3D needle-punched compound fabric based on Weibull distribution

The Effect of Heat Treatment on Mechanical Properties of Car Interior Fabric Used for Injection Molding

Effects of the Hot-Drawing Process on the Pore Parameters, Gas Absorption and Mechanical Performances of Activated Carbon-Loaded Porous Poly(m-Phenylene Isophthalamide) Composite Fibres