Abstract:Under conditions of seismic action or any other mutation stresses, the soil of the liquefiable foundation can lose its strength and stiffness rapidly due to the liquefication, resulting in the loss of the bearing capacity. The traditional anti-liquefaction measures mainly focus on the ground treatment, while the open-hole pipe pile provided in this paper has both anti-liquefaction and bearing capacity. Firstly, the liquid flow in the holes of the pipe pile is assumed to meet the Poiseuille equation, and the equal strain assumption is applied. Then we derive the analytic solution of the pore pressure considering both radial and vertical flows under the time-varying load, combined with the stress concentration phenomenon of the pipe pile composite foundation. Furthermore, considering the pore pressure accumulation under cyclic loading, the analytical solution is improved by using the empirical model of pore pressure development. Based on the analytical solution, this paper analyzes and compares the development of pore pressure of the open-hole pipe piles, gravel piles, undrained piles and natural foundation. Thus, the results indicate that the open-hole pipe pile has the best drainage capacity. The factors such as the modulus ratio of pile and soil and the radius ratio have important influence on the development of pore pressure. The higher the modulus ratio of pile and soil is, the smaller the radius ratio is, and the faster the pore pressure dissipation rate is. The influence of open-hole coefficient on the development of pore pressure is not obvious. The load frequency only affects the peak value of initial pore pressure and has little influence on the rate of pore pressure oscillation attenuation.

Theoretical model for investigating three-dimensional effect in integrity test of open-end pipe piles

Influence of Weld on Integrity Testing of Prestressed Pipe Piles

An Improved Model for the Horizontal Dynamic Response of Piles in Saturated Soil

STUDY ON PILE LONGITUDINAL VIBRATION CONSIDERING EFFECT OF UNDERGROUND WATER LEVEL

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Theoretical study of dynamic pore water pressure dissipation characteristics of open-hole pipe pile

Model Tests on Elevated Piles Subjected to Lateral Static and Impact Loading

Theoretical analysis of three-dimensional effect in pile integrity test

Multipoint Traveling Wave Decomposition Method and Its Application in Extended Pile Shaft Integrity Test

A simplified non-axisymmetric pile-soil interaction model for pile integrity testing analysis

A new non-axisymmetric 3D model of the pile-soil system for dynamic analysis of large-diameter piles under eccentric excitation load

Simplified model of defective pile-soil interaction considering three-dimensional effect and application to integrity testing

Response of Open-End Pipe Piles to Vertical Dynamic Load Considering the Effects of Soil Plug and Soil Disturbance During Driving

Load Transfer of Offshore Open-Ended Pipe Piles Considering the Effect of Soil Plugging

A 3D analytical model for distributed low strain test and parallel seismic test of pipe piles

Influence of the Three-Dimensional Effect of Pile-Soil System on the Vertical Dynamic Response of Large-Diameter Piles in Low-Strain Integrity Testing

Dynamic soil resistance to vertical vibration of pipe pile

Fictitious Soil Pile Model for Dynamic Analysis of Pipe Piles under High-Strain Conditions

Dynamic Impedances and Free-Field Vibration Analysis of Pile Groups in Saturated Ground

A novel analytical approach to vertical dynamic vibration of pipe‐pile groups considering soil‐plug effect