Abstract:Titanium and its alloys have superior electrochemical properties compared to other alloy systems due to the formation of a protective TiO2 film on metal surfaces. The ability to generate the protective oxide layer will depend upon the type of alloy to be used. The aim of this work was to characterize the electrochemical corrosion behavior of titanium Ti-CP2 and alloys Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V, and Ti Beta-C. Samples were anodized in 1 M H2SO4 and H3PO4 solutions with a current density of 0.025 A/cm2. Electrochemical tests on anodized alloys were carried out using a three-electrode cell and exposed in two electrolytes, i.e., 3.5 wt % NaCl and 3.5 wt % H2SO4 solutions at room temperature. Scanning electron microscopy (SEM) was used to observe the morphology of anodized surfaces. The electrochemical techniques used were cyclic potentiodynamic polarization (CPP) and electrochemical noise (EN), based on the ASTM-G61 and G199 standards. Regarding EN, two methods of data analysis were used: the frequency domain (power spectral density, PSD) and time-frequency domain (discrete wavelet transform). For non-anodized alloys, the results by CCP and EN indicate icorr values of ×10−6 A/cm2. However, under anodizing conditions, the icorr values vary from ×10−7 to ×10−9 A/cm2. The PSD Ψ0 values are higher for non-anodized alloys, while in anodized conditions, the values range from −138/−122 dBi (A2·Hz−1)1/2 to −131/−180 dBi (A2·Hz−1)1/2. Furthermore, the results indicated that the alloys anodized in the H3PO4 bath showed an electrochemical behavior that can be associated with a more homogeneous passive layer when exposed to the 3.5 wt % NaCl electrolyte. Alloys containing more beta-phase stabilizers formed a less homogeneous anodized layer. These alloys are widely used in aeronautical applications; thus, it is essential that these alloys have excellent corrosion performance in chloride and acid rain environments.

Electrochemical Corrosion Characteristics of Arc-Ion-Plated AlTiN Coating for Marine Application

Corrosion and Electrochemical Impedance Spectroscopy of Thin TiALN and TiCN PVD Coatings for Protection of Ballast Water Screen Filters

Electrochemical Behavior of (cr, W, Al, Ti, Si)N Multilayer Coating on Nitrided AISI 316L Steel in Natural Seawater

Anodic behavior in AlCl3-EMIC ionic liquid of Ti6Al4V alloy and its application for enhancing the adhesion strength of aluminum coatings

Thermal Fatigue and Oxidation Resistance of TiAlN Coating Grown by Arc Ion Plating

Microstructure and Electrochemical Characterization of Ti–Al–C–N Coatings As Biological Dry Electrodes

Influence of Target Current on Microstructures and Stoichiometries of TiAlN Coating Deposited by Arc Ion Plating

Electrochemical Corrosion of Titanium and Titanium Alloys Anodized in H2SO4 and H3PO4 Solutions

High Temperature Behavior of TiAlN Coating Prepared by Arc Ion Plating on TC4 Titanium Alloy

Comparative Investigation on Corrosion Resistance of Stainless Steels Coated with Titanium Nitride, Nitrogen Titanium Carbide and Titanium-Diamond-like Carbon Films

Corrosion and hardness characteristics of Ti/TiN-modified Ti6Al4V alloy in marine environment

(Digital Presentation) Anti-Corrosion Investigation of Titanium Electrode for Cu Plating

Stimulated corrosion damage of Ti-Al-N multilayer coatings under interval salt spray and hot condition

Corrosion Behavior of Titanium Alloys (Ti CP2, Ti-6Al-2Sn-4Zr-2Mo, Ti-6Al-4V y Ti Beta-C) with Anodized and Exposed in NaCl and H2SO4 Solutions

High Temperature Protection Properties of TiAlN Coating Prepared by Arc Ion Plating on Surface of Ti6Al4V Titanium Alloy

Corrosion Inhibition Effect of Mg-Al-pAB-LDH Coating for Steel in the Marine Environment

Microstructure and Properties of TiAlN Coating Prepared by Magnetron Sputtering on Titanium Alloy

Corrosion Behavior of Active Screen Plasma Nitrided 38crmoal Steel under Marine Environment

Effects of titanium nitride coatings on surface and corrosion characteristics of Ni-Ti alloy

Corrosion Behavior of Al2O3-40TiO2 Coating Deposited on 20MnNiMo Steel via Atmospheric Plasma Spraying in Hydrogen Sulfide Seawater Stress Environments

Tribological and Corrosion Performance of CrAlN/CrN Coatings in Artificial Seawater under Varied Nitrogen Pressures