Abstract:The auxiliary boundary condition must be specified for the discontinuous finite element methods (e.g., DG, SD, FR/CPR) to evaluate the solution gradients. Since the velocity gradient near the wall is not fully resolved in the WMLES grid, we recommend a looser auxiliary condition than the usual no‐slip condition. Superior performance of the proposed WMLES framework was confirmed for a benchmarking non‐equilibrium periodic hill flow with curvilinear walls compared to the results of an algebraic WMLES and a DDES. Summary To robustly and accurately simulate wall‐bounded turbulent flows at high Reynolds numbers, we propose suitable boundary treatments for wall‐modeled large‐eddy simulation (WMLES) coupled with a high‐order flux reconstruction (FR) method. First, we show the need to impose an auxiliary boundary condition on auxiliary variables (solution gradients) that are commonly introduced in high‐order discontinuous finite element methods (DFEMs). Auxiliary boundary conditions are introduced in WMLES, where the grid resolution is too coarse to resolve the inner layer of a turbulent boundary layer. Another boundary treatment to further enhance stability with under‐resolved grids, is the use of a modal filter only in the wall‐normal direction of wall‐adjacent cells to remove the oscillations. A grid convergence study of turbulent channel flow with a high Reynolds number (Reτ≈5200 ) shows that the present WMLES framework accurately predicts velocity profiles, Reynolds shear stress, and skin friction coefficients at the grid resolutions recommended in the literature. It was confirmed that a small amount of filtering is sufficient to stabilize computation, with negligible influence on prediction accuracy. In addition, non‐equilibrium periodic hill flow with a curved wall, including flow separation, reattachment, and acceleration at a high Reynolds number (Reh≈37,000 ), is reported. Considering stability and the prediction accuracy, we recommend a loose auxiliary wall boundary conditions with a less steep velocity gradient for WMLES using high‐order DFEMs.

Implementation of a dynamic slip wall model for large eddy simulation in the local domain-free discretization method

Constrained Large-Eddy Simulation for Aerodynamics

Constrained Large-Eddy Simulation of Turbulent Flow over Inhomogeneous Rough Surfaces

Constrained Large Eddy Simulation of Wall-Bounded Turbulent Flows

A new dynamic slip approach for wall-modeled Large Eddy Simulations in a Consistent Discontinuous Galerkin Framework

A dynamic wall model for large eddy simulation of turbulent flow over complex/moving boundaries based on the immersed boundary method

A hybrid immersed boundary/wall-model approach for large-eddy simulation of high-Reynolds-number turbulent flows

Toward a flow-structure-based wall-modeled large-eddy simulation paradigm

Wall-modeled large eddy simulation in the immersed boundary-lattice Boltzmann method

A Total-Shear-stress-conserved Wall Model for Large-Eddy Simulation of High-Reynolds Number Wall Turbulence

Wall-Modeled Large-Eddy Simulation Method for Unstructured-Grid Navier–Stokes Solvers

On robust boundary treatments for wall‐modeled LES with high‐order discontinuous finite element methods

A Comparative Study on the Large-Scale-resolving Capability of Wall-Modeled Large-Eddy Simulation

Machine learning building-block-flow wall model for large-eddy simulation

A new paradigm for wall-modeled large eddy simulations using the volume-filtering framework

Wall-resolved and wall-modelled large-eddy simulation of plane Couette flow

Wall-modeled large-eddy simulation of non-equilibrium turbulent boundary layers

Wall-modeled large-eddy simulation based on building-block flows

Reynolds-constrained Subgrid-scale Model for Large-eddy Simulation of Turbulent Wall Flows

Wall Boundary Conditions for RANS Modelling of Unidirectional and Oscillatory Boundary-Layer Flows

A new ODE-based turbulence wall model accounting for pressure gradient and Reynolds number effects