Abstract:Hard chromium coatings electrodeposited are highly valued in multiple industries for their excellent mechanical characteristics and resistance to corrosion. The general process for preparing these coatings includes Cr6+ and Cr3+ process, the Cr6+ process is highly toxic and strictly regulated. The Cr3+ process is less hazardous but can produce coatings with defects. We propose an alternative process of electroplating nanocrystalline Cr-Al alloy coating with high hardness by using anhydrous Cr2+ electrolyte. The impact of current density on mechanical properties (i.e., hardness H, elastic modulus E, fracture toughness H/E and resistance to plastic deformation H-3/E-2) and coating defects has been systematically investigated. As current density increases from 1 mA/cm(2) to 5 mA/cm(2), the coating surface morphology changes from polyhedral to nodular clusters with grain size decreasing from a few microns to several nanometers. The nanoindentation test was performed on the cross-section of the coating. The nanohardness H of the coating reaches a high of 8.26 GPa, attributed to both solid solution strengthening and grain refinement. A significant decrease in elastic modulus E of the coating compared to bulk Cr is observed and can be explained by the grain boundary mediated process and a grain coalescence model. High values H/E and H-3/E-2 indicate improved fracture toughness and resistance to plastic deformation of the coating. As current density exceeding 5 mA/cm(2), laminar cracks develop due to co-deposition of CrCl2 particles. This is attributed to the electrolyte acidity transition, caused by depletion of Al2Cl7- at the interface. This work provides a deeper understanding of the microstructural evolution, mechanical properties and defects of Cr-Al alloy coatings and also provides a new method to fabricate high-quality coatings with enhanced properties. The defect-free coatings achieved in this study have great potential for practical applications in various fields such as tribological and corrosion resistance coatings.

Current Status and Development Trend of Electroplated Cobalt Alloy and Composite Coatings as Replacements of Electroplated Hard Chromium Coatings

Fabrication and performance of Ni-Co-P/Si3N4 electroplated composite coatings on al-si alloys

Recent Status and Development of Composite Electrodeposition from Trivalent Chromium Bath

Electrochemical Deposition of Ni, NiCo Alloy and NiCo–Ceramic Composite Coatings—A Critical Review

Developments and Applications of Electroless Composite Plating

A Review on Current Status of Zinc-Iron-phoshporus Electroplating

Recent Progress in Electrodeposition of Ni and Ni-based Alloys

Research Advances of Electroless Plating of Nickel-phosphorus Alloy

New Evolution of Electrodeposition of Nanoalloys

A review of electrodeposited Ni-Co alloy and composite coatings: Microstructure, properties and applications

Electroplating and characterization of Zn–Ni, Zn–Co and Zn–Ni–Co alloys

Research Progress and Development Trend of Amorphous and Nanocrystalline Composite Coatings: A Review

A Review on High Entropy Alloys Coatings: Fabrication Processes and Property Assessment

Research Progress of Chromium Base Corrosion Resistant Alloy

Effect of Current Density on the Mechanical Properties and Defects of Nanocrystalline Cr-Al Solid Solution Alloy Coatings

Current Status and Development Trend for Cathodic Electrophoretic Coatings

Electrodeposition of Ni Mo alloys and composite coatings: A review and future directions

A Comparative Study between a Thermal Spray CoCrFeMnNi0.8V/WC-Co High Entropy Alloy Composite Coating and Plain CoCrFeMnNi0.8V and WC-Co Thermal Spray Coatings

Electrodeposition and corrosion performance of Ni-Co alloys with different cobalt contents

Microstructures, Physical and Corrosion Behavior of NiCoFeCu High-Entropy Alloy Nanocomposite Coatings Electro-Co-deposited with Nano-Si3n4 Particles

Effects of Co Contents on the Microstructures and Properties of Electrodeposited NiCo–Al Composite Coatings