Abstract:Though the binder is not an active material and does not contribute capacity to lithium ion batteries (LIBs), it is an important ingredient for maintaining the integrity of the electrode, which helps to improve electrical contact between the active materials and conductive carbon black, improves the Li + transport efficiency, reduces the internal resistance of Li-ion batteries and effectively depresses the crack formations and phase separation. Polyvinylidene fluoride (PVDF) is a polymer that is commonly used as a binder for both anode and cathode materials in LIBs. However, it is not suitable for Si electrode due to its poor binding capability and stability. Viewed as a next generation anode material, Si has been extensively studied due to its extremely high theoretical specific capacity of 3578 mAh/g (assuming Li 15 Si 4 as intermediate product). However, silicon undergoes huge volume variations during repeated discharge and charge, which requires a strong binder to maintain the electrode mechanical integrity. Developing a high strength binder for silicon anodes has been considered as an efficient pathway to alleviate various capacity decay pathways. Polyacrylic acid (PAA) and its lithiated version (LiPAA), rich with carboxy function group, can provide stronger binding and are widely used as binder for Si electrode. In this work, we optimized Si electrode formulation by varying the binder composition. The optimized Si electrodes were electrochemically tested in both half cells and full cells. With improvement in electrochemical performance, cracks at the electrode level can still be observed for the cycled electrodes, which suggests that a stronger binder is required to mitigate volume expansion of Si electrodes and hold the particles together. We further studied the polyimide (PI) materials as binders for Si anodes in an attempt to achieve more stable cycling performance. In this work, we explore various PI crosslinking conditions and their effects on electrochemical performance. The optimized silicon electrode exhibits a higher tensile strength than that of conventional PAA binder. The strong adhesion of the PI binder suppresses the structural collapse of the Si negative electrode during lithiation/delithiation, enabling good capacity retention and stable cycle life.

Effect of binder properties on electrochemical performance for silicon-graphite anode: Method and application of binder screening

Inorganic/organic Composite Binder with Self-Healing Property for Silicon Anode in Lithium-Ion Battery

Effect of polyimide binder on electrochemical characteristics of surface-modified silicon anode for lithium ion batteries

(Invited) Binder Investigation for Silicon Electrode of Lithium-Ion Batteries

Epoxy and Amide Crosslinked Polarity Enhanced Polysaccharides Binder for Silicon Anode in Lithium-Ion Batteries

Effect of silicone segment and imidization of polyimide-based binder on the electrochemical performances of high silicon content anode for lithium-ion batteries

Understanding Polyacrylic Acid and Lithium Polyacrylate Binder Behavior in Silicon Based Electrodes for Li-Ion Batteries

Development of Dual-Functional Polyamide Imidazole Binder for Silicon Anode Lithium-Ion Battery

An Aqueous Binary Binder for Silicon-Based Electrodes

Effect of Binder Architecture on the Performance of Silicon/Graphite Composite Anodes for Lithium Ion Batteries

Effect of binders on performance of Si/C composite as anode for Li-ion batteries

A Physically Cross-Linked Hydrogen-Bonded Polymeric Composite Binder for High-Performance Silicon Anodes

Polymeric Binder Design for Sustainable Lithium-Ion Battery Chemistry

Eco-Friendly Water-Processable Polyimide Binders with High Adhesion to Silicon Anodes for Lithium-Ion Batteries

Undervalued Roles of Binder in Modulating Solid Electrolyte Interphase Formation of Silicon-Based Anode Materials

An Elastic Cross-Linked Binder for Silicon Anodes in Lithium-Ion Batteries with a High Mass Loading

A Semi-fluid Multi-functional Binder for High-performance Silicon Anode of Lithium-Ion Batteries

Effect of the Content and Type of Binders on Electrochemical Performance of Silicon Anode Materials

A Highly Efficient Silicone-Modified Polyamide Acid Binder for Silicon-Based Anode in Lithium-Ion Batteries

Influence of the Binder properties on Silicon Anode for Solid-State Batteries

Key Factors for Binders to Enhance the Electrochemical Performance of Silicon Anodes through Molecular Design