Salt-responsive polyampholyte-based hydrogel actuators with gradient porous structures

Zijian Shao,Shanshan Wu,Qian Zhang,Hui Xie,Tao Xiang,Shaobing Zhou

DOI: https://doi.org/10.1039/d0py01492c

IF: 4.6

2021-01-01

Polymer Chemistry

Abstract:A polyampholyte-based hydrogel actuator with water-responsive shape deformation was fabricated, and the gradient distribution of chemical composition was proved by micro-FTIR.

polymer science

What problem does this paper attempt to address?

Dual Salt- and Thermo-Responsive Programmable Bilayer Hydrogel Actuators with Pseudo-Interpenetrating Double-Network Structures.

Shengwei Xiao,Mingzhen Zhang,Xiaomin He,Lei Huang,Yanxian Zhang,Baiping Ren,Mingqiang Zhong,Yung Chang,Jintao Yang,Jie Zheng

DOI: https://doi.org/10.1021/acsami.8b06169

IF: 9.5

2018-01-01

ACS Applied Materials & Interfaces

Abstract:Development of smart soft actuators is highly important for fundamental research and industrial applications, but has proved to be extremely challenging. In this work, we present a facile, one-pot, one-step method to prepare dual-responsive bilayer hydrogels, consisting of a thermos-responsive poly(N-isopropyl acrylamide) (polyNIPAM) layer and a salt-responsive poly(3-(1-(4-vinylbenzyl)-1H-imidazol-3-ium-3-yl)propane-1-sulfonat) (polyVBIPS) layer. Both polyNIPAM and polyVBIPs layers exhibit a completely opposite swelling/shrinking behavior, where polyNIPAM shrinks (swells) but polyVBIPS swells (shrinks) in salt solution (water) or at high (low) temperatures. By tuning NIPAM:VBIPS ratios, the resulting polyNIPAM/polyVBIPS bilayer hydrogels enable to achieve fast and large-amplitude bidirectional bending in response to temperatures, salt concentrations, and salt types. Such bidirectional bending, bending orientation and degree can be reversibly, repeatedly, and precisely controlled by salt- or temperature-induced cooperative, swelling-shrinking properties from both layers. Based on their fast, reversible, bidirectional bending behavior, we further design two conceptual hybrid hydrogel actuators, serving as a six-arm gripper to capture, transport, and release an object and an electrical circuit switch to turn on-and-off a lamp. Different from the conventional two or multi-step methods for preparation of bilayer hydrogels, our simple, one-pot, one-step method and a new bilayer hydrogel system provide an innovative concept to explore new hydrogel-based actuators through combining different responsive materials that allow to program different stimulus for soft and intelligent materials applications.
Multiple-responsive and amphibious hydrogel actuator based on asymmetric UCST-type volume phase transition.

Baoyi Wu,Manqing Xie,Chuanzhuang Zhao,Chongyi Chen,Lu Hua,Yukun Jian

DOI: https://doi.org/10.1021/acsami.9b17159

2019-10-30

Abstract:Thermo-responsive hydrogel actuators have attracted tremendous interest due to their promising applications in artiﬁcial muscles, soft robotics, and flexible electronics. However, most of these materials are based on polymers with lower critical solution temperature (LCST), while those from upper critical solution temperature (UCST) are rare. Herein, we report a multiple-responsive UCST hydrogel actuator based on the complex of poly(acrylic acid) (PAAc) and poly(acrylamide) (PAAm). By applying a heterogeneous photo-polymerization, a bilayer hydrogel was obtained, including a layer of interpenetrating network (IPN) of PAAm/PAAc and a layer of single network of PAAm. When cooled down below the UCST, the PAAm/PAAc layer contracted due to the hydrogen bonding of the two polymers while the PAAm layer stays in swelling state, driving the hydrogel to curl. By adjusting the composition of the two layers, the amplitude of actuation behavior could be regulated. By creating patterned IPN domains with photo-masks, the hydrogel could deform into complex 2D and 3D shapes. Active motion was realized in both water and oil bath, thanks to the internal water exchange between the two layers. Interestingly, the hydrogel actuator is also responsive to urea and salts (Na2SO4, NaCl, NaSCN), due to that the strength of the hydrogen bonds in the IPN changes with the additives. Overall, the current study realized an anisotropic UCST transition through introducing asymmetrically distributed polymer-polymer hydrogen-bonds, which would inspire new inventions of intelligent materials.

Engineering,Medicine,Materials Science
Thermal-Responsive Hydrogel Actuators with Photo-Programmable Shapes and Actuating Trajectories

Han-Xiao Wang,Xin-Yu Zhao,Jin-Qiang Jiang,Zhao-Tie Liu,Zhong-Wen Liu,Guo Li

DOI: https://doi.org/10.1021/acsami.2c11514

2022-11-18

Abstract:Thermal-responsive hydrogel actuators have aroused a wide scope of research interest and have been extensively studied. However, their actuating behaviors are usually monotonous due to their unchangeable shapes and structures. Here, we report thermal-responsive poly(isopropylacrylamide-co-2-(dimethylamino)ethyl methacrylate)/alginate hydrogels with programmable external shapes and internal actuating trajectories. The volume phase transition temperatures of the resulting hydrogels can be tuned in...

materials science, multidisciplinary,nanoscience & nanotechnology
Biomimetic Gradient Hydrogel Actuators with Ultrafast Thermo-Responsiveness and High Strength

Yuxi Li,Licheng Liu,Hao Xu,Zhihan Cheng,Jianhui Yan,Xu-Ming Xie

DOI: https://doi.org/10.1021/acsami.2c07631

2022-07-07

Abstract:Most current hydrogel actuators suffer from either poor mechanical properties or limited responsiveness. Also, the widely used thermo-responsive poly-(N-isopropylacrylamide) (PNIPAM) homopolymer hydrogels have a slow response rate. Thus, it remains a challenge to fabricate thermo-responsive hydrogel actuators with both excellent mechanical and responsive properties. Herein, ultrafast thermo-responsive VSNPs-P(NIPAM-co-AA) hydrogels containing multivalent vinyl functionalized silica nanoparticles...

materials science, multidisciplinary,nanoscience & nanotechnology
Liquid Stratification and Diffusion-Induced Anisotropic Hydrogel Actuators with Excellent Thermosensitivity and Programmable Functionality

Pengli Dong,Weizhong Xu,Zhongwen Kuang,Youxing Yao,Zhiqin Zhang,Daoyou Guo,Huaping Wu,Tingyu Zhao,Aiping Liu

DOI: https://doi.org/10.1002/aisy.202100030

IF: 7.298

2021-01-01

Advanced Intelligent Systems

Abstract:Smart hydrogel actuators with programmable anisotropic structures present fascinating prospects considering their distinctive shape transformation and controllable environmental responsiveness under external stimuli. However, the design of anisotropic hydrogels with simple and universal fabrication and programmable functionality is challenging for their valuable applications in smart actuators and soft robots. Herein, a simple, green, and devisable strategy is proposed to construct a heterogeneous porous hydrogel system by the different liquid diffusion (such as amyl alcohol, water, and ethanol) into a monomeric precursor solution of thermosensitive hydrogels. The well-defined micro/nanoporous gradient and patterned structures related to selective liquid stratification and interfacial diffusion favor the fast response and accurate programmable deformation of hydrogels under temperature stimuli. Inspiringly, this simple diffusion-driven tactic can be perfectly applicable for different responsive hydrogels with programmable multifunctionality by adding functional nanomaterials into the diffusible liquid. This green, general, and facile diffusion-driven strategy provides significant guidance for fabricating environmentally responsive hydrogels with tailorable functionality for their multipurpose applications in drug delivery, bioengineering, smart actuators, and soft robots.
Fast-response thermo-sensitive actuator based on asymmetric structured PNIPAM hydrogel with inorganic particles embedding

Liu, Aiping

DOI: https://doi.org/10.1007/s13233-023-00158-1

IF: 2.127

2023-04-04

Macromolecular Research

Abstract:Hydrogel actuators have potential applications in many fields because of their multiple responsiveness to environmental stimuli. However, it is still very challenging to design a hydrogel actuator with simple preparation, fast response, and good mechanical properties. In this work, a facile and convenient method to obtain a fast responsive hydrogel actuator has been successfully developed by embedding uniform inorganic particles into Poly(N-isopropylacrylamide) hydrogel network to form an asymmetric structure. By controlling the types and contents of inorganic particles, a wide range of adjustable actuation property can be achieved. At the same time, the introduction of inorganic particles greatly increases the mechanical properties of hydrogels, which is also very important for actuation performance improvement of hydrogel actuators. The optimized hydrogel exhibits relatively fast bending deformation under thermal stimulation (60 °C), with a bending velocity of about 13.0° s −1 within first 10 s and a bending amplitude of about 328.1° within 1 min. The hydrogel can be designed to be temperature-controlled claw actuators with programmable shapes, indicating its application prospects in encapsulating, grasping, and transporting objects in water environment. Graphical We successfully designed and manufactured hybrid hydrogels with an asymmetric structure and improved mechanical property by adding inorganic particles to the PNIPAM hydrogel. The hybrid hydrogel with optimized SiO 2 particles shows superior actuation properties due to bigger different in the swelling rates on both sides of hybrid hydrogels. The flexible and controllable deformation of the hydrogel actuator provides an inspiration for intelligent soft actuator in water environmental applications.

polymer science
Ultrafast Fabrication of Gradient Nanoporous All‐Polysaccharide Films as Strong, Superfast, and Multiresponsive Actuators

Huilin Cui,Na Pan,Wenxin Fan,Chunzhao Liu,Yanhui Li,Yanzhi Xia,Kunyan Sui

DOI: https://doi.org/10.1002/adfm.201807692

IF: 19

2019-03-26

Advanced Functional Materials

Abstract:The design of smart hydrogel actuators fully constructed from natural polymers for assessing the biomedical applications is important but challenging. Herein, an extremely simple, green, and ultrafast strategy is presented for preparing robust gradient all‐polysaccharide polyelectrolyte complex hydrogel actuators. Driven by diffusing of low molecular weight chitosan into high molecular weight sodium alginate solution, a nanoporous, ultrastrong, and gradient chitosan/sodium alginate complex hydrogel film with adjustable thickness can be directly generated on the interface of two solutions within minutes. The as‐prepared film can provide superfast temperature, ionic strength, and pH‐triggered programmable deformations, and perform a distinct sequential double folding behavior due to the competitive effect between complexed and noncomplexed segments of polyelectrolyte. Besides, patterning Ca2+ to locally crosslink sodium alginate in the film enables various more complex shape transformations. This green and simple diffusion‐driven strategy provides significant guidance for fabricating bio‐friendly actuators with applications in drug delivery, tissue engineering, soft robotics, and active implants.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Robust and rapid responsive organic-inorganic hybrid bilayer hydrogel actuators with silicon nanoparticles as the cross-linker

Bing-Zi Yang,Shu-Ya Zhang,Ping-Hua Wang,Chun-Hua Liu,Yuan-Yuan Zhu

DOI: https://doi.org/10.1016/j.polymer.2021.123863

IF: 4.6

2021-07-01

Polymer

Abstract:Hydrogel actuators belong to a type of smart soft materials which can take place anisotropic thrust and/or displacement under various environmental stimuli including thermal, light, pH, humidity etc. Robust strength and rapid response are of critical importance to high-performance hydrogel actuators. Here we report the syntheses and investigations of mechanical properties for series novel organic-inorganic hydrogels by using vinyl functionalized silicon nanoparticles (SiNPs) as the cross-linker. The doped SiNPs significantly enhance the mechanical strength of polyacrylamide (PAAm) hydrogels. Furthermore, the SiNPs composite poly-N-isopropylacrylamide (PNIPAm) hydrogels exhibit rapid response in deswelling and swelling behaviours. The excellent mechanical and responsive properties are attributed to the enhanced rigidity via SiNPs doping into the hydrogel network and the improved water diffusion through mPEG branch chains on the surface of nanoparticles, respectively. As a proof of concept, a bilayer hydrogel actuator is facilely synthesized via an in-situ polymerization process. This composite hydrogel actuator shows extremely fast response rate of directional bending in hot water, about 6 times faster than the control without doping of SiNPs. This work demonstrates that these SiNPs composite hydrogels provide enhanced mechanical and responsive performances and may expand the future applications in smart hydrogel materials.

polymer science
A responsive supramolecular hydrogel with robust mechanical properties for actuator and strain sensor

Yuekai Huang,Zhixian Dong,Mali Wu,Caihong Lei

DOI: https://doi.org/10.1002/app.55351

IF: 3

2024-02-24

Journal of Applied Polymer Science

Abstract:Poly(acrylic acid‐co‐lauryl methacrylate)(P(AA‐co‐LMA)) hydrogel. Responsive hydrogels hold great promise for applications such as biological tissue engineering, controlled drug release, soft actuators, and intelligent sensors. However, the design and construction of robust responsive hydrogels using a simple method remains a significant challenge. Herein, a non‐covalently crosslinked responsive hydrogel was constructed by introducing carboxyl‐Zr4+ metal coordination to the hydrophobic association network of P(AA‐co‐LMA) hydrogel through a facile one‐pot polymerization method. The incorporation of multiple reversible interactions, including hydrogen bonding, metal coordination, and hydrophobic association, resulted in a responsive hydrogel with exceptional mechanical strength (≈2.92 MPa), outstanding flexibility (elongation>1000%), and rapid response to pH alterations. Furthermore, the hydrogel also presented good ionic conductivity due to the abundant movable ions, as well as high sensitivity and stability. As application demonstrations, the supermolecular hydrogel had been successfully used in actuating and strain sensing. This work establishes an effective design strategy for creating tough and multifunctional responsive hydrogel.

polymer science
Multi-stimuli responsive, shape deformation, and synergetic biomimetic actuator

Lian Chen,Yanlei Zhang,Kaihang Zhang,Fan Li,Gaigai Duan,Yue Sun,Xianshuo Wei,Xuxu Yang,Feng Wang,Chunmei Zhang,Shanshan Li,Xingyu Cao,Chunxin Ma,Shaohua Jiang

DOI: https://doi.org/10.1016/j.cej.2023.148205

IF: 15.1

2023-12-25

Chemical Engineering Journal

Abstract:Hydrogel actuators with controllable deformation and excellent biocompatibility are widely used in soft robot, valve, drug delivery and lenses. However, the stimulation response performance of existing hydrogel actuators mostly focuses on a single active layer, which greatly affects its driving performance and service life. In this work, we integrate temperature-responsive hydrogel (Poly (N-isopropyl acrylamide), PNIPAM) and pH-responsive hydrogel (polyacrylic acid, PAAc) into one system to fabricate a dual active layer composite hydrogel actuator with high performance. Based on the PAAc hydrogels achieving contract or expand at different pH values, the obtained actuator exhibits admirable bidirectional bending characteristics. In addition, the anisotropic bamboo sheet endows the hydrogel actuator with programmable 3 D complex deformation. Benefitting from the synergy and different responsiveness between the two active layers, the hydrogel actuator not only has multiple response performance, but also greatly improves its deformation degree and response speed. More importantly, these promising properties of the actuator have broad application prospects in the development of pattern design and intelligent switch. This work proposes a promising strategy for the structural design of hydrogel actuators with excellent performance, and encourages more exploration of the application range of the actuator.

engineering, chemical, environmental
Spatiotemporally-regulated multienzymatic polymerization endows hydrogel continuous gradient and spontaneous actuation

Saiji Shen,Chu Wu,Yinghui Shang,Hongdou Shen,Yue Liao,Yuting Guo,Min Hu,Xia Wang,Gang Li,Qigang Wang

DOI: https://doi.org/10.1007/s11426-021-1107-8

2021-11-03

Science China Chemistry

Abstract:There are several natural materials which have evolved functional gradients, ingeniously attaining maximal efficacy from limited components. Herein, we utilized the spatiotemporal distribution of initiator acetylacetone to regulate the multienzyme polymerization and fabricate a chitosan-polymer hydrogel. The temporal priority order of acetylacetone was higher than phenol-modified chitosan by density functional theory calculation. The acetylacetone within the gelatin could gradually diffuse spatially into the chitosan hydrogel to fabricate the composite hydrogel with gradient network structure. The gradient hydrogel possessed a transferring topography from the two-dimensional pattern. A continuously decreased modulus along with acetylacetone diffusion was confirmed by atomic force microscope-based force mapping experiment. The water-retaining ability of various regions was confirmed by low-field nuclear magnetic resonance (NMR) and thermogravimetric analysis (TG) analysis, which led to the spontaneous actuation of gradient hydrogel with maximum 1821°/h curling speed and 227° curling angle. Consequently, the promising gradient hydrogels could be applied as intelligent actuators and flexible robots.

chemistry, multidisciplinary
Combining 3D Printing with Electrospinning for Rapid Response and Enhanced Designability of Hydrogel Actuators

Tingting Chen,Hadi Bakhshi,Li Liu,Jian Ji,Seema Agarwal

DOI: https://doi.org/10.1002/adfm.201800514

IF: 19

2018-01-01

Advanced Functional Materials

Abstract:Porous structures have emerged as a breakthrough of shape-morphing hydrogels to achieve a rapid response. However, these porous actuators generally suffer from a lack of complexity and diversity in obtained 3D shapes. Herein, a simple yet versatile strategy is developed to generate shape-morphing hydrogels with both fast deformation and enhanced designability in 3D shapes by combining two promising technologies: electrospinning and 3D printing. Elaborate patterns are printed on mesostructured stimuli-responsive electrospun membranes, modulating in-plane and interlayer internal stresses induced by swelling/shrinkage mismatch, and thus guiding morphing behaviors of electrospun membranes to adapt to changes of the environment. With this strategy, a series of fast deformed hydrogel actuators are constructed with various distinctive responsive behaviors, including reversible/irreversible formations of 3D structures, folding of 3D tubes, and formations of 3D structures with multi low-energy states. It is worth noting that although poly(N-isopropyl acrylamide) is chosen as the model system in the present research, our strategy is applicable to other stimuli-responsive hydrogels, which enriches designs of rapid deformed hydrogel actuators.
Reinforced hydrogel building via formation of alginate-chitosan double network with pH & salt-responsiveness and electric conductivity for soft actuators

Jian Xu,Wei Song,Lili Ren,Nan Wu,Rui Zeng,Shuai Wang,Zeyu Wang,Qingzhu Zhang

DOI: https://doi.org/10.1016/j.ijbiomac.2024.130282

Abstract:Aiming at green and friendly environmental protection, polyvinyl alcohol/sodium alginate/chitosan (PSCS) double network hydrogel was successfully prepared through diffusing the high molecular weight chitosan into PVA/sodium alginate (PS) hydrogel without any other toxic reagents. The polyanion hydrogels could be significantly enhanced by immersing the polyanion hydrogel in high molecular weight chitosan solution without requiring specific structure. The PSCS hydrogel had a compact and rough surface structure with the smaller porosities and larger crystallization degree compared with polyvinyl alcohol/sodium alginate hydrogels and polyvinyl alcohol/sodium alginate/Ca2+ (PSCa) hydrogels. The PSCS hydrogel possessed excellent hydrolysis resistance, the significant pH-sensitive and salt-sensitive swelling. In addition, the flexibility, Young's modulus and mechanical properties of PSCS hydrogel can be adjusted through the changing the content of sodium alginate. Moreover, PS, PSCa and PSCS had electric conductivity, and PSCS showed twice the conductivity compared to PS hydrogel. Based on differences of swelling ratio, a PSCS bilayer hydrogel was designed and showed excellent pH-driven deformation ability. The PSCS hydrogel is expected to expand the application of hydrogels in conditions involving stimulus response, and might serve as a promising intelligent actuators or soft robots.
Designing Fast-Response Porous Hydrogel Actuators with Improved Toughness

Maryam Adavoudi Jolfaei,Yufeng Zhao,Geoffrey M Spinks,Zhen Jiang

DOI: https://doi.org/10.1039/d4cc04379k

IF: 4.9

2024-11-09

Chemical Communications

Abstract:A design concept for porous hydrogel actuators is demonstrated, combining lower critical solution temperature (LCST)-type phase separation with crystallinity formation. In contrast to the exsiting methods of producing porous hydrogels, our concept could not only generate fast actuation speed, but also greatly enhance the hydrogel tensile strength and toughness.

chemistry, multidisciplinary
Robust Hydrogel Actuators Functioning in Multi‐Environments Enabled by Thermo‐Responsive Polymer Nanoparticle Coatings on Hydrogel Surfaces

Mengnan Zhang,Haokun Shen,Karen Hakobyan,Zhen Jiang,Kang Liang,Jiangtao Xu

DOI: https://doi.org/10.1002/smll.202400534

IF: 13.3

2024-04-12

Small

Abstract:This study introduces a novel method for crafting hydrogel actuators with anisotropic structures, enhancing adaptability across diverse environments. The thin PNIPAm nanoparticle layer, synthesized via interfacial precipitation polymerization, ensures exceptional structural stability. This versatile approach enables programmable 3D actuation, offering a pathway for advanced hydrogel applications. Hydrogel actuators with anisotropic structures exhibit reversible responsiveness upon the trigger of various external stimuli, rendering them promising for applications in many fields including artificial muscles and soft robotics. However, their effective operation across multiple environments remains a persistent challenge, even for widely studied thermo‐responsive polymers like poly(N‐isopropyl acrylamide) (PNIPAm). Current attempts to address this issue are hindered by complex synthetic procedures or specific substrates. This study introduces a straightforward methodology to grow a thin, dense PNIPAm nanoparticle layer on diverse hydrogel surfaces, creating a highly temperature‐sensitive hydrogel actuator. This actuator demonstrates adaptability across various environments, including water, oil, and open air, owing to its distinct structure facilitating self‐water circulation during actuation. The thin PNIPAm layer consists of interconnected PNIPAm nanoparticles synthesized via in situ interfacial precipitation polymerization, seamlessly bonded to the hydrogel substrate through an interfacial layer containing hybrid hydrogel/PNIPAm nanoparticles. This unique anisotropic structure ensures exceptional structural stability without interfacial delamination, even enduring harsh treatments such as freezing, ultrasonic irradiation, and prolonged water immersion. Remarkably, PNIPAm films on hydrogel surfaces which enable programmable 3D actuation can also be precisely patterned. This synthetic approach opens a novel pathway for fabricating advanced hydrogel actuators with broad‐ranging applications.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
Bioinspired gradient hydrogel actuators with rewritable patterns and programmable shape deformation

Kangwei Mo,Jiehan Lin,Peng Wei,Jin Mei,Chunyu Chang

DOI: https://doi.org/10.1039/d1tc02470a

IF: 6.4

2021-01-01

Journal of Materials Chemistry C

Abstract:Our work provides a facile yet efficient strategy to fabricate hydrogel actuators with rewritable patterns and programmable shape deformations.

materials science, multidisciplinary,physics, applied
Bio-inspired Hydrogel Actuator with Rapid Self-strengthening Behavior

Qingye Liu,Xiaohui Wang,Yarui Hou,Yue Cheng,Jianfeng Zhang,Longqiang Xiao,Jingtai Zhao,Wei Li

DOI: https://doi.org/10.1016/j.eurpolymj.2023.111941

IF: 6

2023-02-24

European Polymer Journal

Abstract:Inspired by intelligent biomaterials which often have flexible responsiveness to multiple environmental cues and strengthen their mechanical properties by trainings, emerging soft actuators require programmable manipulation. Currently, the integration of such characteristics as rapid self-strengthening, strain-adaptive stiffening and smart actuation, into a single hydrogel actuator is urgently needed. Here, we report a self-strengthened hydrogel actuator based on the semi-interpenetrating polymer network consisting of polyvinyl alcohol (PVA) and poly(N-isopropylacrylamide) (PNIPAm), which can display diverse programmable actuations by responding to temperature/salt stimuli. In the design, the layer of freeze-thawed PNIPAm/PVA (PPGel-F) is assembled with another original PNIPAm/PVA hydrogel layer (PPGel) into one device. By taking advantage of the PVA crystalline nanofibrils in the PPGel-F matrix, the differentiated swelling degree across the bilayer structure gives rise to asymmetric deformations and the resultant shape transformation. Moreover, upon the mechanical training with less than 100 cycles, the anisotropic arrangement of PVA nanofibrils through strong hydrogen bonding interactions can swiftly immobilize the amorphous polymer chains orientation along the tensile direction. This enhances the strain-induced crystallization, thereby generating the rapid self- strengthening behavior. The proposed work provides potential solution for constructing dynamically adaptive hydrogel systems that can mimic biological tissues for more intelligent soft robotics and bionic research.

polymer science
Poly (vinyl alcohol) based gradient cross-linked and reprogrammable humidity-responsive actuators

Yifan Zheng,Hong Huang,Yan Wang,Jing Zhu,Junrong Yu,Zuming Hu

DOI: https://doi.org/10.1016/j.snb.2021.130735

2021-12-01

Abstract:Actuators are a kind of energy-conversion devices which can perceive external stimulus and undergo reversible deformation or motion to produce a mechanical response. Developing actuators with advanced structures rather than typical bilayer configuration is essential for stable actuations, and installing reprogrammability into actuators for on-demand complex shape transformation within the same piece of material is more convenient and cost-effective for new actuation modes. However, actuators that satisfy these requirements have rarely been reported yet. Herein, a facile and low-cost design strategy for a transparent, gradient cross-linked, patternable and reprogrammable humidity-responsive actuator based on commercial available poly (vinyl alcohol) (PVA) is presented. The actuator is fabricated by grafting PVA with 9-anthracenecarboxylic acid (9-AN) via esterification and then blending with a UV-screening agent 2,2',4,4'-tetrahydroxybenzophenone (THBP) followed by photo-crosslinking. In such design, the abundant hydroxyl groups in grafted PVA endow the actuator with humidity-responsive ability, the THBP enables the gradient cross-linking of actuator due to the attenuated UV intensity through the film thickness, and the photo-controlled reversible cross-linking of anthracene groups allows the patterning and reprogramming of the actuator. The chemical structure, gradient morphology, and humidity-responsiveness of actuators are thoroughly investigated. The fast actuation speed and large actuation amplitude, the realization of complex shape deformation by photo-controlled programming/reprogramming, and the biomimetic applications such as the soft walking robot are also demonstrated. This study is expected to provide new opportunity for facilely developing high-performance, stable and reprogrammable actuators.

chemistry, analytical,electrochemistry,instruments & instrumentation
Lignin Precipitation-Driven Fabrication of Gradient Porous Hydrogel Actuator with Temperature Response

Ying Chen,Peipei Kuang,Xiaochen Shen,Xiaowei Lv,Yushu Wang,Weihan Yin,Tongqing Zou,Ben Wang,Yupeng Liu,Quli Fan

DOI: https://doi.org/10.1088/1361-665x/acb4cc

IF: 4.1

2023-01-01

Smart Materials and Structures

Abstract:An operative and straightforward precipitation-driven approach was reported to fabricate an anisotropic hydrogel actuator with temperature response. Through in situ deposition of lignin nanoparticles (LNP) in the process of polyacrylamide (PAM) polymerization with the presence of hydroxypropyl cellulose (HPC), an inhomogeneous hydrogel network (PAM/HPC/lignin hydrogel, PHL hydrogel) with distinct gradient porous structure was achieved that could be tailored to form a hydrogel actuator. The PHL hydrogels exhibit faster shape deformation as responding to temperature and higher mechanical properties caused by introducing the LNP and HPC chains. The deformation direction and rate of the hydrogel actuator could be influenced by the lignin content, temperature, and as well as their shape. The maximum bending angle could reach near 360 degrees with 60 s as it was exposed to 60 degrees C. Due to the excellent bending behavior of the PHL hydrogel, the potential applications as grippers and valves were studied, and the results showed its sensitive response to temperature, suggesting its potential application as an intelligent actuator in the future.
Marine Amoebae‐Inspired Salting Hydrogels to Reconfigure Anisotropy for Reprogrammable Shape Morphing

Guorong Gao,Kaiyang Yin,Junyi Han,Yini Hu,Jincui Gu,Junjie Wei,Tao Chen

DOI: https://doi.org/10.1002/anie.202416672

2024-10-13

Angewandte Chemie International Edition

Abstract:Reprogrammable shape morphing is ubiquitous in living beings and highly crucial for them to move in normal situations, even to survive under dangerous conditions. There is increasing interest in using asymmetric hydrogel structures to understand and mimic living beings' shape morphing upon an external trigger in a controlled way. However, these asymmetric or heterogeneous configurations cannot be further modified once the polymer hydrogels are prepared. Therefore, it is a great challenge to achieve reprogrammable shape morphing using the existing hydrogels. Inspired by marine amoebae, which transform into several different morphologies according to the various external salt concentrations, a new strategy is developed for salting hydrogels to reconfigure their anisotropy toward reprogrammable shape morphing. Polyampholyte hydrogels with equal stoichiometric COO‒ and N+(CH3)3 groups were first swollen in HCl/NaCl solution. After being then transferred into water, they first swollen again by water uptake driven by the osmotic pressure, and then were spontaneously deswollen due to increase in internal pH and dialysis of ions leading to deprotonation of COOH to COO‒ and regeneration of COO‒/N+(CH3)3 electrostatic attraction. This work provides a novel strategy to reconfigure anisotropy of hydrogel soft actuators and to open up an avenue for reprogrammable shape morphing.

chemistry, multidisciplinary

Salt-responsive polyampholyte-based hydrogel actuators with gradient porous structures

Dual Salt- and Thermo-Responsive Programmable Bilayer Hydrogel Actuators with Pseudo-Interpenetrating Double-Network Structures.

Multiple-responsive and amphibious hydrogel actuator based on asymmetric UCST-type volume phase transition.

Thermal-Responsive Hydrogel Actuators with Photo-Programmable Shapes and Actuating Trajectories

Biomimetic Gradient Hydrogel Actuators with Ultrafast Thermo-Responsiveness and High Strength

Liquid Stratification and Diffusion-Induced Anisotropic Hydrogel Actuators with Excellent Thermosensitivity and Programmable Functionality

Fast-response thermo-sensitive actuator based on asymmetric structured PNIPAM hydrogel with inorganic particles embedding

Ultrafast Fabrication of Gradient Nanoporous All‐Polysaccharide Films as Strong, Superfast, and Multiresponsive Actuators

Robust and rapid responsive organic-inorganic hybrid bilayer hydrogel actuators with silicon nanoparticles as the cross-linker

A responsive supramolecular hydrogel with robust mechanical properties for actuator and strain sensor

Multi-stimuli responsive, shape deformation, and synergetic biomimetic actuator

Spatiotemporally-regulated multienzymatic polymerization endows hydrogel continuous gradient and spontaneous actuation

Combining 3D Printing with Electrospinning for Rapid Response and Enhanced Designability of Hydrogel Actuators

Reinforced hydrogel building via formation of alginate-chitosan double network with pH & salt-responsiveness and electric conductivity for soft actuators

Designing Fast-Response Porous Hydrogel Actuators with Improved Toughness

Robust Hydrogel Actuators Functioning in Multi‐Environments Enabled by Thermo‐Responsive Polymer Nanoparticle Coatings on Hydrogel Surfaces

Bioinspired gradient hydrogel actuators with rewritable patterns and programmable shape deformation

Bio-inspired Hydrogel Actuator with Rapid Self-strengthening Behavior

Poly (vinyl alcohol) based gradient cross-linked and reprogrammable humidity-responsive actuators

Lignin Precipitation-Driven Fabrication of Gradient Porous Hydrogel Actuator with Temperature Response

Marine Amoebae‐Inspired Salting Hydrogels to Reconfigure Anisotropy for Reprogrammable Shape Morphing