Abstract:Poor cycle and rate performance caused by volume effects and sluggish kinetics is the main bottleneck for most lithium-ion battery (LIB) anode materials run on the conversion reaction. Although nanostructure engineering has shown to be an effective method to reduce the undesirable volume effects, cycling instability usually remains in nanostructured electrodes owning to particle aggregation in discharge and loss of active materials in charge. Here, to make these kinds of materials practical, we have developed a structure of ultrafine MoO2 nanoparticles (<3 nm) confined by a conductive carbon nanosheet matrix (MoO2/C). Instead of running on the conversion mechanism, the Li storage in the MoO2/C composite is through a two-step mechanism in discharge: intercalation followed by the formation of metallic Li, acting as a hybrid host for both Li ion intercalation and metallic Li plating. The Li-storage mechanism has been revealed by in situ X-ray diffraction analysis and in situ scanning transmission electron microscopy with corresponding electron energy loss spectrum analysis, which explains the natural origin of such high capacity along with good cyclability. This unique MoO2/C structure exhibits an excellent discharge capacity (810 mAh g–1 at 200 mA g–1) and cyclability (75% capacity retention over 1000 cycles). The carbon sheet plays a vital role in both a conductive network and a structure supporter with a robust confining effect that keeps the size of MoO2 uniformly under 3 nm even after high-temperature calcination. Our finding provides insights for the design of next-generation LIB anode materials with high capacity and longevity.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c10833?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c10833</a>.Descriptions of materials synthesis; characterization details; electrochemical measurements; the XRD pattern and FTIR for flower-like Mo–PDA composites; the SEM images of the MoO2 nanobelts; the TGA curves of the MoO2/C and MoO2 nanobelts; CV curves, galvanostatic discharge–charge profiles, and rate performance of the MoO2 nanobelts; ex situ STEM and in situ STEM images of MoO2/C after lithiation (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10833/suppl_file/am0c10833_si_001.pdf">PDF</a>)In situ TEM video (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c10833/suppl_file/am0c10833_si_002.avi">AVI</a>)This article has not yet been cited by other publications.

Lithium storage properties of Li2MoO3 and its effect as a cathode additive in full cells

Introducing high-valence elements into cobalt-free layered cathodes for practical lithium-ion batteries

Heightening the long cycling stability and reducing oxygen loss of Li-rich cathode materials by Mo–F Co-doping for half/full lithium-ion batteries

Influence of Mo addition on the structural and electrochemical performance of Ni-rich cathode material for lithium-ion batteries

Improved Cycling Performance of Cation-Disordered Rock-Salt Li1.2Ti0.4Mn0.4O2 Cathode through Mo-Doping and Al2O3-Coating

High-Energy-Density and Long-Lifetime Lithium-Ion Battery Enabled by a Stabilized Li2O2 Cathode Prelithiation Additive

Overlithiation lithium-rich Mn-based oxide as cathode pre-lithiation agent towards high-energy-density batteries

Modifying the Cathode–Electrolyte Interphase by Sulfone-Based Additive to Enhance the Electrochemical Performance of LiNi 0.5 Mn 1.5 O 4

Electrocatalytic Decomposition of Lithium Oxalate-Based Composite Microspheres as a Prelithiation Additive in Lithium-Ion Batteries

Strong metal oxide-support interaction in MoO 2 / N -doped MCNTs heterostructure for boosting lithium storage performance

Development of Electrolyte Additives to Enable High-Voltage LiNi0.5Mn1.5O4 Lithium Ion Batteries

Enhancing the Electrochemical Performance of Li2-xMnO3 via Dual Strategies: Using MOF-Derived Manganese Oxide Precursor and Tuning Li Content

Enhancing the Electrochemical Performance of Li<sub>2</sub>-xMnO<sub>3</sub> via Dual Strategies: Using MOF-Derived Manganese Oxide Precursor and Tuning Li Content

Study on the superior lithium storage performance of carbon/Sn–Mo oxide composite as lithium-ion battery anode

High-efficiency Mo Doping Stabilized LiNi0.9Co0.1O2 Cathode Materials for Rapid Charging and Long-Life Li-ion Batteries

Synergetic effects of Na+-Mo6+ co-doping on layered Li1.2Mn0.54Ni0.13Co0.13O2 cathode for high performance lithium-ion batteries

Tuning the Cathode‐Electrolyte Interphase Chemistry with Multifunctional Additive for High‐Voltage Li‐Ion Batteries

Effect of Single-Walled Carbon Nanotube Sub-carbon Additives and Graphene Oxide Coating for Enhancing the 5 V LiNi 0.5 Mn 1.5 O 4 Cathode Material Performance in Lithium-Ion Batteries

Effect of cation doping on the electrochemical properties of Li2MoO3 as a promising cathode material for lithium-ion battery

Confining Ultrafine MoO 2 in a Carbon Matrix Enables Hybrid Li Ion and Li Metal Storage

Na Doping and CeO2 Nanoparticle Surface Modification Enhancing the Li-Rich Li1.2Mn0.54Ni0.13Co0.13O2 Cathode Material for a Lithium-Ion Battery