Abstract:Multiaxis machine tools are widely used in manufacturing. The measurement of motion error is important to improve the machining accuracy of machine tools. A double ball bar (DBB), as a high-precision single-dimensional position reading device, is widely used to measure the motion error of the circular path of machine tools. However, the motion errors contain the cylindrical radial and axial errors with respect to the circular path plane. Therefore, the measurement results of the DBB are incomplete because they do not contain axial errors. To measure the motion error of the circular path accurately, completely and concisely, a novel measurement method based on the combined DBB (C-DBB) is proposed in this paper, which can directly measure the radius and axial motion error of the circular path in one measurement. First, the measuring principle of the C-DBB method is introduced, and the measurement model of the radius and axial motion error of the circular path is established. Then, a measuring device using the C-DBB method was designed based on the lever principle, and the error parameters of the designed device were analyzed. According to the error analysis results, the measurement results of the C-DBB method were compensated and corrected. Finally, the C-DBB method is used to measure the circular path on the vertical CNC milling machine, and the results are compared with the measurement results using the DBB method. It is shown that the proposed C-DBB method can obtain high-precision multidimensional motion error in a single measurement, and the designed measuring device based on the C-DBB method has high repeatability and good circular path measuring ability. The proposed method provides an effective method for machine tool multidimensional motion error measurement and compensation.

Quantitative analysis method for measuring dead zone of non-orthogonal shafting structure

High-Accuracy Method for Measuring Two-Dimensional Angles of A Linear Guideway

A Systemic Model for Simultaneously Measuring Three dimensional Rotation Angles of the Linear Guide Track [J]

A New Boresighting Method of the Aircraft Gun Using a Laser Tracker

An Improved Two-Point Real-Time Measuring Method for Radial Micro-Displacement Measurement on High-Speed Smart Boring Bar

Implementation and Verification of a Four-Probe Motion Error Measurement System for a Large-Scale Roll Lathe Used in Hybrid Manufacturing

Precision Measurement of Z -Slide Vertical Error Motion of an Ultra-Precision Lathe by Using Three-Probe Method

Real-time Measuring Method to Measure the Micro-Displacement of a Rotating Cutter in Precise Piston Noncylinder Pinhole Boring

Laser Based Measurement for the Monitoring of Shaft Misalignment

A New Error Measurement Method to Identify All Six Error Parameters of A Rotational Axis of A Machine Tool

Embedded displacement measuring device based on error separating technique of multi-circle overlapping three-probe method

Full-scale Measurement of CNC Machine Tools

Volumetric Error Modeling And Analysis For Cnc Machine Tool Based On Multi-Body System

Online approach to measuring relative location of spatial geometric features of long rotating parts

Interior Profile Accuracy Assessment Method of Deep-Hole Parts Based on Servo Drive System

Normal direction measurement in robotic drilling and precision calculation

Articulated Laser Sensor for Three-Dimensional Precision Measurement

A Novel Method for Measuring Radial and Axial Errors in a Cylindrical Coordinate System Using a Combined Double Ball Bar

Error Analysis of Normal Surface Measurements Based on Multiple Laser Displacement Sensors

Noncontact measurement of rectangular splines shaft based on line-structured light

Coaxiality of Stepped Shaft Measurement Using the Structured Light Vision