Abstract:<p>Epoxidized fatty acids and fatty acid esters are used as chemical intermediates and environmentally friendly bio-lubricants. The epoxidation is carried out by the Prileschajew reaction, which implies the use of hydrogen peroxide as oxidation agent and a percarboxylic acid as the oxygen carrier. The epoxidation process is slow in the two-phase system (aqueous phase and oil phase), but it can be considerably enhanced by incorporating a heterogeneous acid catalyst. The results for the epoxidation of a model compound, oleic acid were presented. A cation-exchange resin (Amberlite IR-120) was used as the heterogeneous catalyst and acetic acid was the reaction carrier. Experimental data on oleic acid epoxidation were obtained at 40–50 °C under conventional heating and microwave irradiation. The experimental set was focused on studying the catalytic effect of the solid resin. The kinetic results revealed that the presence of the heterogeneous catalyst completely masked the enhancing effect of microwave radiation. An extensive set of kinetic data obtained from a laboratory-scale loop reactor was modelled with a realistic heterogeneous model taking into account the co-existence of three phases in the chemically complex reaction system. Rate equations were presented for all the reaction steps involved: the perhydrolysis, epoxidation and ring-opening steps. The rate equations were included in the three-phase reactor model and the kinetic parameters of the system were determined by non-linear regression analysis.</p>

Synergistic hybrid catalyst synthesis for epoxidation of linoleic acid via in situ performic acid

Chemical modification of linoleic acid via catalytic epoxidation of corn oil: A sustainable approach

In Situ Epoxidation of Hybrid Oleic Acid Derived from Waste Palm Cooking Oil and Palm Oil with Applied ZSM-5 Zeolite as Catalyst

Sustainable epoxidation of sunflower oil via heterogenous catalytic in situ peracids mechanism

Epoxidation of propylene to propylene oxide catalyzed by μ-oxo-bismetalloporphyrins

Synergistic catalytic epoxidation of palm stearin applied by in situ peracid mechanism

Sustainable approach for catalytic epoxidation of oleic acid followed by in situ ring-opening hydrolysis with applied ion exchange resin

Sustainable approach for catalytic green epoxidation of oleic acid with applied ion exchange resin

Epoxidation of Hybrid Oleic Acid Derived From Palm Oil and Waste Cooking Oil For Eco-Friendly Polyol Production

Chiral Ketone- or Chiral Amine-Catalyzed Asymmetric Epoxidation of Cis-1-Propenylphosphonic Acid Using Hydrogen Peroxide As Oxidant

Catalytic epoxidation of palm oleic acid by heterogeneous catalysts: Optimization and kinetic model

Degradation autocatalytic epoxidation of oleic acid derived from palm oil via in situ performic acid mechanism

Kinetics and reactor modelling of fatty acid epoxidation in the presence of heterogeneous catalyst

Mass Transfer and Reaction Kinetics of Soybean Oil Epoxidation in a Formic Acid‐autocatalyzed Reaction System

Lipase catalyzed green epoxidation of oleic acid using ultrasound as a process intensification method

In situ epoxidation of ethylene propylene diene rubber by performic acid

Optimization Of Epoxidized Methyl Acetoricinoleate Synthesis By Response Surface Methodology

Epoxidation of olefins with hydrogen peroxide catalyzed by a reusable lacunary-type phosphotungstate catalyst

Optimization of epoxidized methyl acetoricinoleate synthesis with ionic liquid catalysts using the response surface methodology

Synthesis of bio-polyol from epoxidized palm oleic acid by homogeneous catalyst

Exploiting Hydroxamic Acids as Organocatalysts for the Epoxidation of Alkenes with Hydrogen Peroxide as the Oxidant