Abstract:The stereospecific design of the interface effects can optimize the electron/Li-ion migration kinetics for energy-storage materials. In this study, an electric field was introduced to silicon-based materials (C-SiOx@Si/rGO) through the rational construction of multi-heterostructures. This was achieved by manipulating the physicochemical properties at the atomic level of advanced Li-ion batteries (LIBs). The experimental and density functional theory calculations showed that the unbalanced charge distribution generated a large potential difference, which in turn induced a large-scale electric-field response with a boosted interfacial charge transfer in the composite. The as-prepared C-SiOx@Si/rGO anode showed advanced rate capability (i.e., 1579.0 and 906.5 mAh g–1 at 1000 and 8000 mA g–1, respectively) when the migration paths of the Li-ion/electrons hierarchically optimized the large electric field. Furthermore, the C-SiOx@Si/rGO composite with a high SiOx@Si mass ratio (73.5 wt %) demonstrated a significantly enhanced structural stability with a 40% volume expansion. Additionally, when coupled with the LiNi0.8Co0.1Mn0.1O2 (NCM) cathode, the NCM//C-SiOx@Si/rGO full cell delivers superior Li-ion storage properties with high reversible capacities of 157.6 and 101.4 mAh g–1 at 500 and 4000 mA g–1, respectively. Therefore, the electric-field introduction using optimized electrochemical reaction kinetics can assist in the construction of other high-performance LIB materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsnano.0c01796?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsnano.0c01796</a>.Additional experimental data, including the FTIR spectrum of SiOx@Si, β-CD, and β-CD/SiOx@Si; SEM of SiOx@Si and SiOx@Si/rGO; TEM with SEAD of SiOx@Si and SiOx@Si/rGO; XPS of different samples; EPR of different samples; SEM of the SiOx@Si electrode after cycling; Raman spectra of the C-SiOx@Si/rGO electrode after cycling; schematic illustration of the evolution of SiOx@Si and C-SiOx@Si/rGO electrodes during cycling; schematic diagram of the configuration of the full cell and the prelithiated process, and the electrochemical performance of different electrodes (<a class="ext-link" href="/doi/suppl/10.1021/acsnano.0c01796/suppl_file/nn0c01796_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Tuning the interface interaction between Nb2O5 nanosheets/graphene for high current rate and long cyclic lithium-ion batteries

Ionic Conductive Interface Boosting High Performance LiNi0.8Co0.1Mn0.1O2 for Lithium Ion Batteries

Large-Scale Electric-Field Confined Silicon with Optimized Charge-Transfer Kinetics and Structural Stability for High-Rate Lithium-Ion Batteries

Carbon coated Nb2O5 nanosheets via dopamine-induced phase transition for high-rate lithium-ion battery

Controllable Graphene Incorporation and Defect Engineering in Mos2-Tio2 Based Composites: Towards High-Performance Lithium-Ion Batteries Anode Materials

Facile Hydrothermal Fabrication of an α-Ni(OH) 2 /N-Doped Reduced Graphene Oxide Nanohybrid as a High-Performance Anode Material for Lithium-Ion Batteries

Fabrication of nitrogen-doped porous graphene hybrid nanosheets from metal-organic frameworks for lithium-ion batteries

Nanochannel-confined Synthesis of Nb2O5/CNTs Nanopeapods for Ultrastable Lithium Storage

Multi-hierarchical Heterostructure of GO/ NiCo2O4/Co3O4 for High Power Lithium-Ion Batteries

Synthesis and Electrochemical Performance of Electrostatic Self-Assembled Nano-Silicon@N-Doped Reduced Graphene Oxide/Carbon Nanofibers Composite as Anode Material for Lithium-Ion Batteries

Synthesis of heterointerfaces in NiO/SnO 2 coated nitrogen-doped graphene for efficient lithium storage

Hierarchical Hybrid ZnFe2O4 Nanoparticles/reduced Graphene Oxide Composite with Long-Term and High-Rate Performance for Lithium Ion Batteries

Nanoscale Phase Engineering in Two-Dimensional Niobium Pentoxide Anodes toward Excellent Electrochemical Lithium Storage

Tuning the electronic properties of NiO anode by in-situ introducing metallic Cu for high capacity and long life-span lithium-ion batteries

Hierarchically Hollow and Porous NiO/NiCo2O4 Nanoprisms Encapsulated in Graphene Oxide for Lithium Storage

Mixed-conducting Interlayer Boosting the Electrochemical Performance of Ni-rich Layered Oxide Cathode Materials for Lithium Ion Batteries

Fabrication of Nb2O5/Carbon Submicrostructures for Advanced Lithium-Ion Battery Anodes

Nanostructured T-Nb2O5-based composite with reduced graphene oxide for improved performance lithium-ion battery anode

Rod-like Ni0.5Co0.5C2O4·2H2O in-situ formed on rGO by an interface induced engineering: Extraordinary rate and cycle performance as an anode in lithium-ion and sodium-ion half/full cells

Effect of Single-Walled Carbon Nanotube Sub-carbon Additives and Graphene Oxide Coating for Enhancing the 5 V LiNi 0.5 Mn 1.5 O 4 Cathode Material Performance in Lithium-Ion Batteries

Excellent lithium storage performance of Ni-MOFs/GO composite as anode in lithium ion battery