Abstract:In this work, the nanostructure catalyst of Co–Ru/CNTs is prepared by chemical reduction technique. Then, a set of catalytic experiments are designed and conducted for the Fischer–Tropsch synthesis (FTS) using the synthesized catalyst in a fixed bed reactor. The physical and chemical properties of the support and the synthesized catalyst were determined using the BET, XRD, H2–TPR, TEM, and H2-chemisorption characterization techniques. Based on the alkyl mechanism and using the Langmuir–Hinshelwood–Hougen–Watson (LHHW) isotherm, a kinetic model is developed for FTS. In most of the previous kinetic models, the primary reactions have merely been used, but in the current derivation of the developed kinetic model, the secondary reactions (adsorption, hydrogenation and chain-growth) and re-adsorption of primary olefins at the secondary active sites are considered. The present comprehensive kinetic model is applied for the product distribution such that the rate equations parameters are acquired via optimization. To estimate the kinetic model parameters, FTS was accomplished via a series of tests under the operating conditions as pressure (P): 10–20 bar, temperature (T): 483–513 K, gas hourly space velocity (GHSV): 1400–2400 h−1 and the H2/CO ratio of 1–2. The rationality and significance of the suggested model were checked through the statistical and correlation tests. The obtained results indicated that the outcomes of the current kinetic model were in good agreement with the experimental data. Using the present kinetic model, the average absolute deviations (AAD%) for the prediction of methane, ethylene and heavier hydrocarbons (C5+) formation rates are obtained as 7.06%, 11.57% and 14.74%.

Mathematical Modeling of Carbon Nanotubes Formation in Fluidized Bed Chemical Vapor Deposition

Experimental Investigation and Modelling on the Thermal Conductivity of CNTs Based Nanofluids

A Vapor-Liquid-Solid Model for Chemical Vapor Deposition Growth of Carbon Nanotubes

Mechanism of Carbon Nanotube Growth in a Nano-agglomerate Fluidized Bed

Numerical Simulation of Nozzle-type CVD Reactor Structural Growth of Carbon Nanotubes

Modeling of the HiPco process for carbon nanotube production. I. Chemical kinetics

Numerical computation drives "Transport-reaction" of carbon nanotube growth processes in fluidized bed reactors—A review

Modeling of the HiPco process for carbon nanotube production. II. Reactor-scale analysis

A New Understanding of Carbon Nanotube Growth: Activation and Deactivation of a Catalyst

Optimization of Synthesis Conditions of Carbon Nanotubes via Ultrasonic-Assisted Floating Catalyst Deposition Using Response Surface Methodology

Understanding the nucleation mechanisms of Carbon Nanotubes in catalytic Chemical Vapor Deposition

Experimental and kinetic modeling of Fischer–Tropsch synthesis over nano structure catalyst of Co–Ru/carbon nanotube

Mass Production of Aligned Carbon Nanotube Arrays by Fluidized Bed Catalytic Chemical Vapor Deposition

The Large-Scale Production of Carbon Nanotubes in A Nano-Agglomerate Fluidized-Bed Reactor

Continuum and Molecular Modeling of Chemical Vapor Deposition over Nano-scale Substrates

Effect of Catalyst on Morphology of Carbon Nano-Materials Prepared in A Nano-Agglomerate Bed

The Mass Production of Carbon Nanotubes Using a Nano-Agglomerate Fluidized Bed Reactor: A Multiscale Space–time Analysis

On-line intermittent growth of carbon nanotubes in a self-made tapered fluidized bed reactor at different inlet distances

Catalysts effect on morphology of carbon nanotubes prepared by catalytic chemical vapor deposition in a nano-agglomerate bed

Molecular investigation into the effect of carbon nanotubes interaction with CO2 in molecular separation using microporous polymeric membranes

Agglomerated CNTs Synthesized in a Fluidized Bed Reactor: Agglomerate Structure and Formation Mechanism