Abstract:Underwater manipulators are important robotic tools in the exploration of the ocean environment. Up to now, most existing underwater manipulators are rigid and with fixed 5 or 7 degrees of freedom (DOF), which may not be very suitable for some complicated underwater scenarios (e.g., pipe networks, narrow deep cavities, etc.). The biomimetic concept of muscles and tendons is also considered as continuum manipulators, but load capacity and operation accuracy are their essential drawbacks and thus limit their practical applications. Recently, the cable-driven technique has been developed for manipulators, which can include numerous joints and hyper-redundant DOF to execute tasks with dexterity and adaptability and thus they have strong potential for these complex underwater applications. In this paper, the design of a novel cable-driven hyper-redundant manipulator (CDHRM) is introduced, which is driven by multiple cables passing through the tubular structure from the base to the end-effector, and the joint numbers can be extended and decided by the specific underwater task requirements. The kinematic analysis of the proposed CDHRM is given which includes two parts: the cable-joint kinematics and the joint-end kinematics. The geometric relationship between the cable length and the joint angles are derived via the established geometric model for the cable-joint kinematics, and the projection relationship between the joint angles and end-effector’s pose is established via the spatial coordinate transformation matrix for the joint-end kinematics. Thus, the complex mapping relationships among the cables, joints and end-effectors are clearly achieved. To implement precise control, the kinematic control scheme is developed for the CDHRM with series-parallel connections and hyper-redundancy to achieve good tracking performance. The experiment on a real CDHRM system with five joints is carried out and the results verify the accuracy of kinematics solution, and the effectiveness of the proposed control design. Particularly, three experiments are tested in the underwater environment, which verifies its good tracking performance, load carrying and grasping capacity.

Review of Cable-driven Hyper-redundant Robotic Arms

Design and Kinematic Control of the Cable-Driven Hyper-Redundant Manipulator for Potential Underwater Applications

Visual Tracking Control of Cable-Driven Hyper-Redundant Snake-Like Manipulator

Unlocking the Potential of Cable-Driven Continuum Robots: A Comprehensive Review and Future Directions

Dual-Loop Control of Cable-Driven Snake-like Robots

A Review on Cable-driven Parallel Robots

A Review on the Environment Perception and Control Technologies for the Hyperredundant Manipulators in Limited Space

Cable Tension Analysis Oriented the Enhanced Stiffness of a 3-DOF Joint Module of a Modular Cable-Driven Human-Like Robotic Arm

Innovative Design Research on a Cable-Driven Humanoid Robotic Arm

Design of a Novel Long-Reach Cable-Driven Hyper-Redundant Snake-like Manipulator for Inspection and Maintenance

Utilizing Reinforcement Learning to Drive Redundant Constrained Cable-Driven Robots with Unknown Parameters

A review on topological architecture and design methods of cable-driven mechanism

Dynamic modeling and trajectory tracking control method of segmented linkage cable-driven hyper-redundant robot

Tri-Space Operational Control of Redundant Multilink and Hybrid Cable-Driven Parallel Robots Using an Iterative-Learning-Based Reactive Approach

Structural Optimisation and Design of a Cable-Driven Hyper-Redundant Manipulator for Confined Semi-Structured Environments

Manipulability Analysis for Cable-Driven Hyper-Redundant Manipulators

Cable Driven Rehabilitation Robots: Comparison of Applications and Control Strategies

An Overall Configuration Planning Method of Continuum Hyper-Redundant Manipulators Based on Improved Artificial Potential Field Method

Non-iterative Geometric Method for Cable-Tension Optimization of Cable-Driven Parallel Robots with 2 Redundant Cables

Generalized Flexible Hybrid Cable-Driven Robot (HCDR): Modeling, Control, and Analysis

Teleoperation Control Design with Virtual Force Feedback for the Cable-Driven Hyper-Redundant Continuum Manipulator