Abstract:The capture of carbon dioxide (CO 2 ) has attracted significant attention to reduce the emissions of greenhouse gases. However, the development of adsorptive materials remains to be a grand challenge. In this work, we successfully synthesized low silica X (LSX) zeolites from low-grade coal gangue (mass ratio of Al 2 O 3 /SiO 2 < 0.50), a major byproduct in the coal mining industry, without additional Si or Al source via a two-step activation method (TA). The LSX zeolite had a Si/Al mole ratio of 1.05 and a specific surface area of 634 m 2 /g. Synthesis conditions including calcination temperature, alkali fusion temperature, potassium hydroxide dosage and crystallization time were systematically investigated to understand the reaction mechanism and optimize the synthesis conditions. Results showed that quartz was the main impurity remained in the product and thermal activation at 1200 °C was beneficial to decompose quartz and suppress the formation of sodalite impurity. Zeolite A could be eliminated by optimizing potassium hydroxide dosage and crystallization time. Compared to the conventional alkali fusion method and calcination activation method, the zeolites synthesized via TA method had better crystallinity and higher purity. The LSX product showed a high CO 2 uptake of 4.99 mmol/g at 298 K and 1 bar. The ideal adsorption solution theory (IAST) selectivity of CO 2 /N 2 (15/85) and CO 2 /CH 4 (50/50) were 376 and 200 at 298 K and 1 bar, respectively. The separation performance was further demonstrated using Aspen Adsorption and results showed a high purity and recovery of 92.6% and 91.3%, respectively, while using 50% CO 2 in N 2 as the feed gas at the adsorption pressure of 211 kPa and desorption pressure of 22 kPa.

Organic template-free synthesis of K-SAPO-34 zeolite for efficient CO 2 separation

Ultrafast synthesis of SAPO-17 zeolites with excellent CO 2 /N 2 and CO 2 /CH 4 separation performance

Achieving highly selective CO 2 adsorption on SAPO-35 zeolites by template-modulating the framework silicon content

The inorganic cation-tailored “trapdoor” effect of silicoaluminophosphate zeolite for highly selective CO 2 separation

Synthesis and Applications of SAPO‐34 Molecular Sieves

In Situ Synthesis of SAPO-34 Zeolites in Kaolin Microspheres for a Fluidized Methanol or Dimethyl Ether to Olefins Process

A green approach to improve the yield of SAPO-34 crystal as well as its methanol-to-olefin performance

Hierarchical Sapo-34/18 Zeolite with Low Acid Site Density for Converting Methanol to Olefins

A chemical approach for ultrafast synthesis of SAPO-n molecular sieves

K+ exchanged zeolite ZK-4 as a highly selective sorbent for CO2

Controlled synthesis of high performance SAPO-34 with sheet-like morphology and small particle size using concentrated gel system

Solvent-Free Synthesis of SAPO-34 Zeolite with Tunable SiO2/Al2O3 Ratios for Efficient Catalytic Cracking of 1-Butene

Regulating the Si/Al ratio of GIS zeolite with bulky primary particles for selective CO 2 capture from hydrocarbons

Synergic regulation of crystalline phase, composition and morphology of SAPO-34 via metal assistance and in situ etching strategy

Synthesis of cobalt-silicon molecular sieve with excellent CO2/N2 adsorption selectivity for dynamic CO2 capture

Ssz-45: A High-Silica Zeolite with Small Pore Openings, Large Cavities, and Unusual Adsorption Properties

Affecting the Formation of the Micro‐structure and Meso/macro‐structure of SAPO‐34 Zeolite by Amphipathic Molecules

Zeolites Derived from Natural Kaolinite for CO2 Adsorption

CO 2 capture using low silica X zeolite synthesized from low-grade coal gangue via a two-step activation method

Nanosized Zeolite P for Enhanced CO 2 Adsorption Kinetics

Synthesis of zeolite molecular sieve 13X from coal-fired slag for efficient room temperature CO2 adsorption