THE SURGICAL TREATMENT OF LINGUAL THYROID

G. Ward,J. Cantrell,W. B. Allan

DOI: https://doi.org/10.1097/00000658-195405000-00002

IF: 13.787

1954-05-01

Annals of Surgery

Abstract:

What problem does this paper attempt to address?

Automation of Functional Mobility Assessments at Home Using a Multimodal Sensor System Integrating Inertial Measurement Units and Computer Vision (IMU-Vision)

Johanna Spangler,Marc Mitjans,Ashley Collimore,Aysha Gomes-Pires,David M Levine,Roberto Tron,Louis N Awad

DOI: https://doi.org/10.1093/ptj/pzad184

2024-02-01

Abstract:Objective: Functional movement assessments are routinely used to evaluate and track changes in mobility. The objective of this study was to evaluate a multimodal movement monitoring system developed for autonomous, home-based, functional movement assessment. Methods: Fifty frail and prefrail adults were recruited from the Brigham and Women's Hospital at Home program to evaluate the feasibility and accuracy of applying the multimodal movement monitoring system to autonomously recognize and score functional activities collected in the home. Study subjects completed sit-to-stand, standing balance (Romberg, semitandem, and tandem), and walking test activities in likeness to the Short Physical Performance Battery. Test activities were identified and scored manually and by the multimodal movement monitoring system's activity recognition and scoring algorithms, which were previously trained on lab-based biomechanical data to integrate wearable inertial measurement unit (IMU) and external red-blue-green-depth vision data. Feasibility was quantified as the proportion of completed tests that were analyzable. Accuracy was quantified as the degree of agreement between the actual and system-identified activities. In an exploratory analysis of a subset of functional activity data, the accuracy of a preliminary activity-scoring algorithm was also evaluated. Results: Activity recognition by the IMU-vision system had good feasibility and high accuracy. Of 271 test activities collected in the home, 217 (80%) were analyzable by the activity-recognition algorithm, which overall correctly identified 206 (95%) of the analyzable activities: 100% of walking, 97% of balance, and 82% of sit-to-stand activities (χ2(2) = 19.9). In the subset of 152 tests suitable for activity scoring, automatic and manual scores showed substantial agreement (Kw = 0.76 [0.69, 0.83]). Conclusions: Autonomous recognition and scoring of home-based functional activities is enabled by a multimodal movement monitoring system that integrates inertial measurement unit and vision data. Further algorithm training with ecologically valid data and a kitted system that is independently usable by patients are needed before fully autonomous, functional movement assessment is realizable. Impact: Functional movement assessments that can be administered in the home without a clinician present have the potential to democratize these evaluations and improve care access.
An Activity Management System for Office Workers Using Multimodal Data

Xiangying Zhang,Pai Zheng,Qiqi He,Tao Peng,Wangchujun Tang,Hongling Ye,Renzhong Tang

DOI: https://doi.org/10.1109/case49997.2022.9926455

2022-01-01

Abstract:Lacking a certain level of activity is associated with multiple health issues, and activity management is significant for office workers who sit 77% of working hours. Recent studies on the Internet of Things spur the advent of applications for daily activity management. However, there is no activity management system collecting data unobtrusively and continuously, which provides activity recognition and assessment for office workers. Hence, this study develops a multimodal activity management system based on an infrared array sensor placed on the desk, a sensing chair, and a mobile phone. This system contains data collection, activity recognition, and activity assessment. A deep learning algorithm based on the feature-level fusion strategy is leveraged to fuse the multimodal activity data and achieve recognition. The activity assessment considers energy expenditure and sedentary bout to reflect office workers' activity characteristics. Finally, an experiment is conducted to verify the feasibility of the proposed system. The results show that recognition accuracy can reach 99.9% and 83.9% by using the validation set approach and leave-one-subject-out cross-validation approach, respectively.
Evaluation of Smartphone Technology on Spatiotemporal Gait in Older and Diseased Adult Populations

Coby Contreras,Ethan C. Stanley,Chanc Deschamps-Prescott,Susan Burnap,Madison Hopkins,Bennett Browning,Jesse C. Christensen

DOI: https://doi.org/10.3390/s24175839

IF: 3.9

2024-09-10

Sensors

Abstract:Objective: Advancements in smartphone technology provide availability to evaluate movement in a more practical and feasible manner, improving clinicians' ability to diagnose and treat adults at risk for mobility loss. The purpose of this study was to evaluate the validity and reliability of a smartphone application to measure spatiotemporal outcomes during level (primary) and uphill/downhill (secondary) walking with and without an assistive device for older adults (OAs), Parkinson's Disease (PD) and cerebrovascular accident (CVA) populations. Methods: A total of 50 adults (OA = 20; PD = 15; CVA = 15) underwent gait analysis at self-selected gait speeds under 0-degree, 5-degree uphill and 5-degree downhill environments. The validity and reliability of the smartphone outcomes were compared to a motion-capture laboratory. Bland–Altman analysis was used to evaluate limits of agreement between the two systems. Intraclass correlation coefficients (ICCs) were used to determine absolute agreement, and Pearson correlation coefficients (r) were used to assess the strength of the association between the two systems. Results: For level walking, Bland–Altman analysis revealed relatively equal estimations of spatiotemporal outcomes between systems for OAs without an assistive device and slight to mild under- and overestimations of outcomes between systems for PD and CVA with and without an assistive device. Moderate to very high correlations between systems (without an assistive device: OA r-range, 0.72–0.99; PD r-range, 0.87–0.97; CVA r-range, 0.56–0.99; with an assistive device: PD r-range, 0.35–0.98; CVA r-range, 0.50–0.99) were also observed. Poor to excellent ICCs for reliability between systems (without an assistive device: OA ICC range, 0.71–0.99; PD ICC range, 0.73–0.97; CVA ICC range, 0.56–0.99; with an assistive device: PD ICC range, 0.22–0.98; CVA ICC range, 0.44–0.99) were observed across all outcomes. Conclusions: This smartphone application can be clinically useful in detecting most spatiotemporal outcomes in various walking environments for older and diseased adults at risk for mobility loss.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Recognizing Manual Activities Using Wearable Inertial Measurement Units: Clinical Application for Outcome Measurement

Ghady El Khoury,Massimo Penta,Olivier Barbier,Xavier Libouton,Jean-Louis Thonnard,Philippe Lefèvre

DOI: https://doi.org/10.3390/s21093245

IF: 3.9

2021-05-07

Sensors

Abstract:The ability to monitor activities of daily living in the natural environments of patients could become a valuable tool for various clinical applications. In this paper, we show that a simple algorithm is capable of classifying manual activities of daily living (ADL) into categories using data from wrist- and finger-worn sensors. Six participants without pathology of the upper limb performed 14 ADL. Gyroscope signals were used to analyze the angular velocity pattern for each activity. The elaboration of the algorithm was based on the examination of the activity at the different levels (hand, fingers and wrist) and the relationship between them for the duration of the activity. A leave-one-out cross-validation was used to validate our algorithm. The algorithm allowed the classification of manual activities into five different categories through three consecutive steps, based on hands ratio (i.e., activity of one or both hands) and fingers-to-wrist ratio (i.e., finger movement independently of the wrist). On average, the algorithm made the correct classification in 87.4% of cases. The proposed algorithm has a high overall accuracy, yet its computational complexity is very low as it involves only averages and ratios.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Classifying Tasks Performed by Electrical Line Workers Using a Wrist-Worn Sensor: A Data Analytic Approach

Saeb Ragani Lamooki,Sahand Hajifar,Jacqueline Hannan,Hongyue Sun,Fadel Megahed,Lora Cavuoto

DOI: https://doi.org/10.1371/journal.pone.0261765

IF: 3.7

2022-01-01

PLoS ONE

Abstract:Electrical line workers (ELWs) experience harsh environments, characterized by long shifts, remote operations, and potentially risky tasks. Wearables present an opportunity for unobtrusive monitoring of productivity and safety. A prerequisite to monitoring is the automated identification of the tasks being performed. Human activity recognition has been widely used for classification for activities of daily living. However, the literature is limited for electrical line maintenance/repair tasks due to task variety and complexity. We investigated how features can be engineered from a single wrist-worn accelerometer for the purpose of classifying ELW tasks. Specifically, three classifiers were investigated across three feature sets (time, frequency, and time-frequency) and two window lengths (4 and 10 seconds) to identify ten common ELW tasks. Based on data from 37 participants in a lab environment, two application scenarios were evaluated: (a) intra-subject, where individualized models were trained and deployed for each worker; and (b) inter-subject, where data was pooled to train a general model that can be deployed for new workers. Accuracies ≥ 93% were achieved for both scenarios, and increased to ≥96% with 10-second windows. Overall and class-specific feature importance were computed, and the impact of those features on the obtained predictions were explained. This work will contribute to the future risk mitigation of ELWs using wearables.
Recognition of Daily Activities in Adults With Wearable Inertial Sensors: Deep Learning Methods Study

Alberto De Ramón Fernández,Daniel Ruiz Fernández,Miguel García Jaén,Juan M Cortell-Tormo

DOI: https://doi.org/10.2196/57097

2024-08-09

Abstract:Background: Activities of daily living (ADL) are essential for independence and personal well-being, reflecting an individual's functional status. Impairment in executing these tasks can limit autonomy and negatively affect quality of life. The assessment of physical function during ADL is crucial for the prevention and rehabilitation of movement limitations. Still, its traditional evaluation based on subjective observation has limitations in precision and objectivity. Objective: The primary objective of this study is to use innovative technology, specifically wearable inertial sensors combined with artificial intelligence techniques, to objectively and accurately evaluate human performance in ADL. It is proposed to overcome the limitations of traditional methods by implementing systems that allow dynamic and noninvasive monitoring of movements during daily activities. The approach seeks to provide an effective tool for the early detection of dysfunctions and the personalization of treatment and rehabilitation plans, thus promoting an improvement in the quality of life of individuals. Methods: To monitor movements, wearable inertial sensors were developed, which include accelerometers and triaxial gyroscopes. The developed sensors were used to create a proprietary database with 6 movements related to the shoulder and 3 related to the back. We registered 53,165 activity records in the database (consisting of accelerometer and gyroscope measurements), which were reduced to 52,600 after processing to remove null or abnormal values. Finally, 4 deep learning (DL) models were created by combining various processing layers to explore different approaches in ADL recognition. Results: The results revealed high performance of the 4 proposed models, with levels of accuracy, precision, recall, and F1-score ranging between 95% and 97% for all classes and an average loss of 0.10. These results indicate the great capacity of the models to accurately identify a variety of activities, with a good balance between precision and recall. Both the convolutional and bidirectional approaches achieved slightly superior results, although the bidirectional model reached convergence in a smaller number of epochs. Conclusions: The DL models implemented have demonstrated solid performance, indicating an effective ability to identify and classify various daily activities related to the shoulder and lumbar region. These results were achieved with minimal sensorization-being noninvasive and practically imperceptible to the user-which does not affect their daily routine and promotes acceptance and adherence to continuous monitoring, thus improving the reliability of the data collected. This research has the potential to have a significant impact on the clinical evaluation and rehabilitation of patients with movement limitations, by providing an objective and advanced tool to detect key movement patterns and joint dysfunctions.
Learning Activities of Daily Living from Unobtrusive Multimodal Wearables: Towards Monitoring Outpatient Rehabilitation

Mehdi Ejtehadi,Sabrina Amrein,Inge Eriks Hoogland,Robert Riener,Diego Paez-Granados

DOI: https://doi.org/10.1109/ICORR58425.2023.10304743

Abstract:Monitoring activities of daily living (ADLs) for wheelchair users, particularly spinal cord injury individuals is important for understanding the rehabilitation progress, customizing treatment plans, and observing the onset of secondary health conditions. This work proposes an innovative sensory system for measuring and classifying ADLs relevant to secondary health conditions. We systematically evaluated multiple wearable sensors such as pressure distribution mats on the wheelchair seat, accelerometer data from the ear and wrists, and IMU data from the wheelchair wheels to achieve the best unobtrusive combination of sensors that successfully distinguished ADLs. Our work resulted in an XGBoost classifier with a 20-second window size and extracted features in statistical, time, frequency, and wavelet domains, with an average class-wise F1 score of 82% (with only 3 out of 12 classes being mislabeled). Our study results demonstrate that the newly investigated modality of the bottom pressure mat emerges as the most relevant information source for recognizing ADLs, while heart and respiratory rates did not provide added value for the selected set of ADLs. The proposed sensory system and methodology proved high quality in most classes and easily extendable for long-term monitoring in outpatient rehabilitation, with the need for an extended database of activities.
A 'one-size-fits-most' walking recognition method for smartphones, smartwatches, and wearable accelerometers

Marcin Straczkiewicz,Emily J. Huang,Jukka-Pekka Onnela

DOI: https://doi.org/10.48550/arXiv.2207.07443

2022-07-15

Abstract:The ubiquity of personal digital devices offers unprecedented opportunities to study human behavior. Current state-of-the-art methods quantify physical activity using 'activity counts,' a measure which overlooks specific types of physical activities. We proposed a walking recognition method for sub-second tri-axial accelerometer data, in which activity classification is based on the inherent features of walking: intensity, periodicity, and duration. We validated our method against 20 publicly available, annotated datasets on walking activity data collected at various body locations (thigh, waist, chest, arm, wrist). We demonstrated that our method can estimate walking periods with high sensitivity and specificity: average sensitivity ranged between 0.92 and 0.97 across various body locations, and average specificity for common daily activities was typically above 0.95. We also assessed the method's algorithmic fairness to demographic and anthropometric variables and measurement contexts (body location, environment). Finally, we have released our method as open-source software in MATLAB and Python.

Human-Computer Interaction,Signal Processing
Innovative Detection and Segmentation of Mobility Activities in Patients Living with Parkinson's Disease Using a Single Ankle-Positioned Smartwatch

Etienne Goubault,Christian Duval,Camille Martin,Karina Lebel

DOI: https://doi.org/10.3390/s24175486

IF: 3.9

2024-08-26

Sensors

Abstract:Background: The automatic detection of activities of daily living (ADL) is necessary to improve long-term home-based monitoring of Parkinson's disease (PD) symptoms. While most body-worn sensor algorithms for ADL detection were developed using laboratory research systems covering full-body kinematics, it is now crucial to achieve ADL detection using a single body-worn sensor that remains commercially available and affordable for ecological use. Aim: to detect and segment Walking, Turning, Sitting-down, and Standing-up activities of patients with PD using a Smartwatch positioned at the ankle. Method: Twenty-two patients living with PD performed a Timed Up and Go (TUG) task three times before engaging in cleaning ADL in a simulated free-living environment during a 3 min trial. Accelerations and angular velocities of the right or left ankle were recorded in three dimensions using a Smartwatch. The TUG task was used to develop detection algorithms for Walking, Turning, Sitting-down, and Standing-up, while the 3 min trial in the free-living environment was used to test and validate these algorithms. Sensitivity, specificity, and F-scores were calculated based on a manual segmentation of ADL. Results: Sensitivity, specificity, and F-scores were 96.5%, 94.7%, and 96.0% for Walking; 90.0%, 93.6%, and 91.7% for Turning; 57.5%, 70.5%, and 52.3% for Sitting-down; and 57.5%, 72.9%, and 54.1% for Standing-up. The median of time difference between the manual and automatic segmentation was 1.31 s for Walking, 0.71 s for Turning, 2.75 s for Sitting-down, and 2.35 s for Standing-up. Conclusion: The results of this study demonstrate that segmenting ADL to characterize the mobility of people with PD based on a single Smartwatch can be comparable to manual segmentation while requiring significantly less time. While Walking and Turning were well detected, Sitting-down and Standing-up will require further investigation to develop better algorithms. Nonetheless, these achievements increase the odds of success in implementing wearable technologies for PD monitoring in ecological environments.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Recognizing Human Activity of Daily Living Using a Flexible Wearable for 3D Spine Pose Tracking

Mostafa Haghi,Arman Ershadi,Thomas M. Deserno

DOI: https://doi.org/10.3390/s23042066

IF: 3.9

2023-02-13

Sensors

Abstract:The World Health Organization recognizes physical activity as an influencing domain on quality of life. Monitoring, evaluating, and supervising it by wearable devices can contribute to the early detection and progress assessment of diseases such as Alzheimer's, rehabilitation, and exercises in telehealth, as well as abrupt events such as a fall. In this work, we use a non-invasive and non-intrusive flexible wearable device for 3D spine pose measurement to monitor and classify physical activity. We develop a comprehensive protocol that consists of 10 indoor, 4 outdoor, and 8 transition states activities in three categories of static, dynamic, and transition in order to evaluate the applicability of the flexible wearable device in human activity recognition. We implement and compare the performance of three neural networks: long short-term memory (LSTM), convolutional neural network (CNN), and a hybrid model (CNN-LSTM). For ground truth, we use an accelerometer and strips data. LSTM reached an overall classification accuracy of 98% for all activities. The CNN model with accelerometer data delivered better performance in lying down (100%), static (standing = 82%, sitting = 75%), and dynamic (walking = 100%, running = 100%) positions. Data fusion improved the outputs in standing (92%) and sitting (94%), while LSTM with the strips data yielded a better performance in bending-related activities (bending forward = 49%, bending backward = 88%, bending right = 92%, and bending left = 100%), the combination of data fusion and principle components analysis further strengthened the output (bending forward = 100%, bending backward = 89%, bending right = 100%, and bending left = 100%). Moreover, the LSTM model detected the first transition state that is similar to fall with the accuracy of 84%. The results show that the wearable device can be used in a daily routine for activity monitoring, recognition, and exercise supervision, but still needs further improvement for fall detection.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Development and Clinical Evaluation of a Web-Based Upper Limb Home Rehabilitation System Using a Smartwatch and Machine Learning Model for Chronic Stroke Survivors: Prospective Comparative Study (Preprint)

Sang Hoon Chae,Yushin Kim,Kyoung-Soub Lee,Hyung-Soon Park

DOI: https://doi.org/10.2196/preprints.17216

2019-12-04

Abstract:BACKGROUND Recent advancements in wearable sensor technology have shown the feasibility of remote physical therapy at home. In particular, the current COVID-19 pandemic has revealed the need and opportunity of internet-based wearable technology in future health care systems. Previous research has shown the feasibility of human activity recognition technologies for monitoring rehabilitation activities in home environments; however, few comprehensive studies ranging from development to clinical evaluation exist. OBJECTIVE This study aimed to (1) develop a home-based rehabilitation (HBR) system that can recognize and record the type and frequency of rehabilitation exercises conducted by the user using a smartwatch and smartphone app equipped with a machine learning (ML) algorithm and (2) evaluate the efficacy of the home-based rehabilitation system through a prospective comparative study with chronic stroke survivors. METHODS The HBR system involves an off-the-shelf smartwatch, a smartphone, and custom-developed apps. A convolutional neural network was used to train the ML algorithm for detecting home exercises. To determine the most accurate way for detecting the type of home exercise, we compared accuracy results with the data sets of personal or total data and accelerometer, gyroscope, or accelerometer combined with gyroscope data. From March 2018 to February 2019, we conducted a clinical study with two groups of stroke survivors. In total, 17 and 6 participants were enrolled for statistical analysis in the HBR group and control group, respectively. To measure clinical outcomes, we performed the Wolf Motor Function Test (WMFT), Fugl-Meyer Assessment of Upper Extremity, grip power test, Beck Depression Inventory, and range of motion (ROM) assessment of the shoulder joint at 0, 6, and 12 months, and at a follow-up assessment 6 weeks after retrieving the HBR system. RESULTS The ML model created with personal data involving accelerometer combined with gyroscope data (5590/5601, 99.80%) was the most accurate compared with accelerometer (5496/5601, 98.13%) or gyroscope data (5381/5601, 96.07%). In the comparative study, the drop-out rates in the control and HBR groups were 40% (4/10) and 22% (5/22) at 12 weeks and 100% (10/10) and 45% (10/22) at 18 weeks, respectively. The HBR group (n=17) showed a significant improvement in the mean WMFT score ( P =.02) and ROM of flexion ( P =.004) and internal rotation ( P =.001). The control group (n=6) showed a significant change only in shoulder internal rotation ( P =.03). CONCLUSIONS This study found that a home care system using a commercial smartwatch and ML model can facilitate participation in home training and improve the functional score of the WMFT and shoulder ROM of flexion and internal rotation in the treatment of patients with chronic stroke. This strategy can possibly be a cost-effective tool for the home care treatment of stroke survivors in the future. CLINICALTRIAL Clinical Research Information Service KCT0004818; https://tinyurl.com/y92w978t
A Multimodal Wearable System for Continuous and Real-Time Breathing Pattern Monitoring During Daily Activity

Wen Qi,Andrea Aliverti

DOI: https://doi.org/10.1109/jbhi.2019.2963048

IF: 7.7

2020-08-01

IEEE Journal of Biomedical and Health Informatics

Abstract:Objective: This study aims to understand breathing patterns during daily activities by developing a wearable respiratory and activity monitoring (WRAM) system. Methods: A novel multimodal fusion architecture is proposed to calculate the respiratory and exercise parameters and simultaneously identify human actions. A hybrid hierarchical classification (HHC) algorithm combining deep learning and threshold-based methods is presented to distinguish 15 complex activities for accuracy enhancement and fast computation. A series of signal processing algorithms are utilized and integrated to calculate breathing and motion indices. The designed wireless communication structure achieves the interactions among chest bands, mobile devices, and the data processing center. Results: The advantage of the proposed HHC method is evaluated by comparing the average accuracy (97.22%) and predictive time (0.0094 s) with machine learning and deep learning approaches. The nine breathing patterns during 15 activities were analyzed by investigating the data from 12 subjects. With 12 hours of naturalistic data collected from one participant, the WRAM system reports the breathing and exercise performance within the identified motions. The demonstration shows the ability of the WRAM system to monitor multiple users breathing and exercise status in real-time. Conclusion: The present system demonstrates the usefulness of the framework of breathing pattern monitoring during daily activities, which may be potentially used in healthcare. Significance: The proposed multimodal based WRAM system offers new insights into the breathing function of exercise in action and presents a novel approach for precision medicine and health state monitoring.

computer science, interdisciplinary applications,mathematical & computational biology,medical informatics, information systems
Development and Clinical Evaluation of a Web-Based Upper Limb Home Rehabilitation System Using a Smartwatch and Machine Learning Model for Chronic Stroke Survivors: Prospective Comparative Study

Sang Hoon Chae,Yushin Kim,Kyoung-Soub Lee,Hyung-Soon Park

DOI: https://doi.org/10.2196/17216

2020-07-09

JMIR mhealth and uhealth

Abstract:Background Recent advancements in wearable sensor technology have shown the feasibility of remote physical therapy at home. In particular, the current COVID-19 pandemic has revealed the need and opportunity of internet-based wearable technology in future health care systems. Previous research has shown the feasibility of human activity recognition technologies for monitoring rehabilitation activities in home environments; however, few comprehensive studies ranging from development to clinical evaluation exist. Objective This study aimed to (1) develop a home-based rehabilitation (HBR) system that can recognize and record the type and frequency of rehabilitation exercises conducted by the user using a smartwatch and smartphone app equipped with a machine learning (ML) algorithm and (2) evaluate the efficacy of the home-based rehabilitation system through a prospective comparative study with chronic stroke survivors. Methods The HBR system involves an off-the-shelf smartwatch, a smartphone, and custom-developed apps. A convolutional neural network was used to train the ML algorithm for detecting home exercises. To determine the most accurate way for detecting the type of home exercise, we compared accuracy results with the data sets of personal or total data and accelerometer, gyroscope, or accelerometer combined with gyroscope data. From March 2018 to February 2019, we conducted a clinical study with two groups of stroke survivors. In total, 17 and 6 participants were enrolled for statistical analysis in the HBR group and control group, respectively. To measure clinical outcomes, we performed the Wolf Motor Function Test (WMFT), Fugl-Meyer Assessment of Upper Extremity, grip power test, Beck Depression Inventory, and range of motion (ROM) assessment of the shoulder joint at 0, 6, and 12 months, and at a follow-up assessment 6 weeks after retrieving the HBR system. Results The ML model created with personal data involving accelerometer combined with gyroscope data (5590/5601, 99.80%) was the most accurate compared with accelerometer (5496/5601, 98.13%) or gyroscope data (5381/5601, 96.07%). In the comparative study, the drop-out rates in the control and HBR groups were 40% (4/10) and 22% (5/22) at 12 weeks and 100% (10/10) and 45% (10/22) at 18 weeks, respectively. The HBR group (n=17) showed a significant improvement in the mean WMFT score (P=.02) and ROM of flexion (P=.004) and internal rotation (P=.001). The control group (n=6) showed a significant change only in shoulder internal rotation (P=.03). Conclusions This study found that a home care system using a commercial smartwatch and ML model can facilitate participation in home training and improve the functional score of the WMFT and shoulder ROM of flexion and internal rotation in the treatment of patients with chronic stroke. This strategy can possibly be a cost-effective tool for the home care treatment of stroke survivors in the future. Trial Registration Clinical Research Information Service KCT0004818; https://tinyurl.com/y92w978t

health care sciences & services,medical informatics
Combined LIBD and XAFS investigation of the formation and structure of Zr(IV) colloids

Hye-Ryun Cho,C. Walther,J. Rothe,V. Neck,M. Denecke,K. Dardenne,T. Fanghänel

DOI: https://doi.org/10.1007/S00216-005-3354-6

2005-07-05

Analytical and Bioanalytical Chemistry

Abstract:
Smartphone-Based Assessment of Mobility and Manual Dexterity in Adult People with Spinal Muscular Atrophy

Eduardo Arteaga-Bracho,Gautier Cosne,Christoph Kanzler,Angelos Karatsidis,Claudia Mazzà,Joaquin Penalver-Andres,Cong Zhu,Changyu Shen,Kelley Erb M,Maren Freigang,Hanna-Sophie Lapp,Simone Thiele,Stephan Wenninger,Erik Jung,Susanne Petri,Markus Weiler,Christoph Kleinschnitz,Maggie C Walter,René Günther,Nolan Campbell,Shibeshih Belachew,Tim Hagenacker

DOI: https://doi.org/10.3233/JND-240004

Abstract:Background: More responsive, reliable, and clinically valid endpoints of disability are essential to reduce size, duration, and burden of clinical trials in adult persons with spinal muscular atrophy (aPwSMA). Objective: The aim is to investigate the feasibility of smartphone-based assessments in aPwSMA and provide evidence on the reliability and construct validity of sensor-derived measures (SDMs) of mobility and manual dexterity collected remotely in aPwSMA. Methods: Data were collected from 59 aPwSMA (23 walkers, 20 sitters and 16 non-sitters) and 30 age-matched healthy controls (HC). SDMs were extracted from five smartphone-based tests capturing mobility and manual dexterity, which were administered in-clinic and remotely in daily life for four weeks. Reliability (Intraclass Correlation Coefficients, ICC) and construct validity (ability to discriminate between HC and aPwSMA and correlations with Revised Upper Limb Module, RULM and Hammersmith Functional Scale - Expanded HFMSE) were quantified for all SDMs. Results: The smartphone-based assessments proved feasible, with 92.1% average adherence in aPwSMA. The SDMs allowed to reliably assess both mobility and dexterity (ICC > 0.75 for 14/22 SDMs). Twenty-one out of 22 SDMs significantly discriminated between HC and aPwSMA. The highest correlations with the RULM were observed for SDMs from the manual dexterity tests in both non-sitters (Typing, ρ= 0.78) and sitters (Pinching, ρ= 0.75). In walkers, the highest correlation was between mobility tests and HFMSE (5 U-Turns, ρ= 0.79). Conclusions: This exploratory study provides preliminary evidence for the usability of smartphone-based assessments of mobility and manual dexterity in aPwSMA when deployed remotely in participants' daily life. Reliability and construct validity of SDMs remotely collected in real-life was demonstrated, which is a pre-requisite for their use in longitudinal trials. Additionally, three novel smartphone-based performance outcome assessments were successfully established for aPwSMA. Upon further validation of responsiveness to interventions, this technology holds potential to increase the efficiency of clinical trials in aPwSMA.
A Combined sEMG and Accelerometer System for Monitoring Functional Activity in Stroke

S Roy,M Cheng,S Chang,J Moore,G De Luca,S Nawab,C De Luca,S. Roy,M. Cheng,S. Chang,J. Moore,G. De Luca,S. Nawab,C. De Luca

DOI: https://doi.org/10.1109/tnsre.2009.2039597

IF: 4.9

2010-01-01

IEEE Transactions on Neural Systems and Rehabilitation Engineering

Abstract:Remote monitoring of physical activity using bodyworn sensors provides an alternative to assessment of functional independence by subjective, paper-based questionnaires. This study investigated the classification accuracy of a combined surface electromyographic (sEMG) and accelerometer (ACC) sensor system for monitoring activities of daily living in patients with stroke. sEMG and ACC data were recorded from 10 hemi paretic patients while they carried out a sequence of 11 activities of daily living (Identification tasks), and 10 activities used to evaluate misclassification errors (non-Identification tasks). The sEMG and ACC sensor data were analyzed using a multilayered neural network and an adaptive neuro-fuzzy inference system to identify the minimal sensor configuration needed to accurately classify the identification tasks, with a minimal number of misclassifications from the non-Identification tasks. The results demonstrated that the highest sensitivity and specificity for the identification tasks was achieved using a subset of 4 ACC sensors and adjacent sEMG sensors located on both upper arms, one forearm, and one thigh, respectively. This configuration resulted in a mean sensitivity of 95.0 %, and a mean specificity of 99.7 % for the identification tasks, and a mean misclassification error of < 10% for the non-Identification tasks. The findings support the feasibility of a hybrid sEMG and ACC wearable sensor system for automatic recognition of motor tasks used to assess functional independence in patients with stroke.

engineering, biomedical,rehabilitation
Development of Wearable Devices for Collecting Digital Rehabilitation/Fitness Data from Lower Limbs

Yu-Jung Huang,Chao-Shu Chang,Yu-Chi Wu,Chin-Chuan Han,Yuan-Yang Cheng,Hsian-Min Chen

DOI: https://doi.org/10.3390/s24061935

IF: 3.9

2024-03-19

Sensors

Abstract:Lower extremity exercises are considered a standard and necessary treatment for rehabilitation and a well-rounded fitness routine, which builds strength, flexibility, and balance. The efficacy of rehabilitation programs hinges on meticulous monitoring of both adherence to home exercise routines and the quality of performance. However, in a home environment, patients often tend to inaccurately report the number of exercises performed and overlook the correctness of their rehabilitation motions, lacking quantifiable and systematic standards, thus impeding the recovery process. To address these challenges, there is a crucial need for a lightweight, unbiased, cost-effective, and objective wearable motion capture (Mocap) system designed for monitoring and evaluating home-based rehabilitation/fitness programs. This paper focuses on the development of such a system to gather exercise data into usable metrics. Five radio frequency (RF) inertial measurement unit (IMU) devices (RF-IMUs) were developed and strategically placed on calves, thighs, and abdomens. A two-layer long short-term memory (LSTM) model was used for fitness activity recognition (FAR) with an average accuracy of 97.4%. An intelligent smartphone algorithm was developed to track motion, recognize activity, and calculate key exercise variables in real time for squat, high knees, and lunge exercises. Additionally, a 3D avatar on the smartphone App allows users to observe and track their progress in real time or by replaying their exercise motions. A dynamic time warping (DTW) algorithm was also integrated into the system for scoring the similarity in two motions. The system's adaptability shows promise for applications in medical rehabilitation and sports.

engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
Outdoor activity classification using smartphone based inertial sensor measurements

Rushikesh Bodhe,Saaveethya Sivakumar,Gopal Sakarkar,Filbert H. Juwono,Catur Apriono

DOI: https://doi.org/10.1007/s11042-024-18599-w

IF: 2.577

2024-02-21

Multimedia Tools and Applications

Abstract:Human Activity Recognition (HAR) deals with the automatic recognition of physical activities and plays a crucial role in healthcare and sports where wearable sensors and intelligent computational techniques are used. We propose a HAR algorithm that uses the smartphones accelerometer data for human activity recognition. In particular, we present a recurrent convolutional neural network-based HAR algorithm that combines a Convolutional Neural Network (CNN) to extract temporal features from the sensor data, a Fuzzy C-Means (FCM) clustering algorithm to cluster the features extracted by the CNN, and a Long Short-Term Memory (LSTM) network to learn the temporal dependencies between the features. We evaluate the proposed methodology on two distinct datasets: the MotionSense dataset and the WISDM dataset. We evaluate the proposed CNN-FCM-LSTM model on the publicly available MotionSense dataset to classify ten activity types: 1) walking upstairs, 2) walking downstairs, 3) jogging, 4) sitting, 5) standing, 6) level ground walking, 7) jumping jacks, 8) brushing teeth, 9) writing, and 10) eating. Next, we evaluate the model's performance on the WISDM dataset to assess its ability to generalize to unseen data. On the MotionSense test dataset, CNN-FCM-LSTM achieves a classification accuracy of 99.69%, a sensitivity of 99.62%, a specificity of 99.63%, and a false positive rate per hour (FPR/h) of 0.37%. Meanwhile, it achieves a classification accuracy of 97.27% on the WISDM dataset. The CNN-FCM-LSTM model's capability to classify a diverse range of activities within a single architecture is noteworthy. The results suggest that the proposed CNN-FCM-LSTM model using smartphone inputs is more accurate, reliable, and robust in detecting and classifying activities than the state-of-the-art models. It should be noted that activity recognition technology has the potential to aid in studying the underpinnings of physical activity, designing more effective training regimens, and simulating the rigors of competition in sports.

computer science, information systems, theory & methods,engineering, electrical & electronic, software engineering
A Smartphone-Based Adaptive Recognition and Real-Time Monitoring System for Human Activities.

Wen Qi,Hang Su,Andrea Aliverti

DOI: https://doi.org/10.1109/thms.2020.2984181

2020-01-01

IEEE Transactions on Human-Machine Systems

Abstract:Human activity recognition (HAR) using smartphones provides significant healthcare guidance for telemedicine and long-term treatment. Machine learning and deep learning (DL) techniques are widely utilized for the scientific study of the statistical models of human behaviors. However, the performance of existing HAR platforms is limited by complex physical activity. In this article, we proposed an adaptive recognition and real-time monitoring system for human activities (Ada-HAR), which is expected to identify more human motions in dynamic situations. The Ada-HAR framework introduces an unsupervised online learning algorithm that is independent of the number of class constraints. Furthermore, the adopted hierarchical clustering and classification algorithms label and classify 12 activities (five dynamics, six statics, and a series of transitions) autonomously. Finally, practical experiments have been performed to validate the effectiveness and robustness of the proposed algorithms. Comparedwith the methods mentioned in the literature, the results show that the DL-based classifier obtains a higher recognition rate (95.15%, waist, and 92.20%, pocket). The decision-tree-based classifier is the fastest method for modal evolution. Finally, the Ada-HAR system can monitor human activity in real time, regardless of the direction of the smartphone.
Activity recognition using cell phone accelerometers

Jennifer R. Kwapisz,Gary M. Weiss,Samuel A. Moore

DOI: https://doi.org/10.1145/1964897.1964918

2011-03-31

ACM SIGKDD Explorations Newsletter

Abstract:Mobile devices are becoming increasingly sophisticated and the latest generation of smart cell phones now incorporates many diverse and powerful sensors. These sensors include GPS sensors, vision sensors (i.e., cameras), audio sensors (i.e., microphones), light sensors, temperature sensors, direction sensors (i.e., magnetic compasses), and acceleration sensors (i.e., accelerometers). The availability of these sensors in mass-marketed communication devices creates exciting new opportunities for data mining and data mining applications. In this paper we describe and evaluate a system that uses phone-based accelerometers to perform activity recognition, a task which involves identifying the physical activity a user is performing. To implement our system we collected labeled accelerometer data from twenty-nine users as they performed daily activities such as walking, jogging, climbing stairs, sitting, and standing, and then aggregated this time series data into examples that summarize the user activity over 10- second intervals. We then used the resulting training data to induce a predictive model for activity recognition. This work is significant because the activity recognition model permits us to gain useful knowledge about the habits of millions of users passively---just by having them carry cell phones in their pockets. Our work has a wide range of applications, including automatic customization of the mobile device's behavior based upon a user's activity (e.g., sending calls directly to voicemail if a user is jogging) and generating a daily/weekly activity profile to determine if a user (perhaps an obese child) is performing a healthy amount of exercise.

THE SURGICAL TREATMENT OF LINGUAL THYROID

Automation of Functional Mobility Assessments at Home Using a Multimodal Sensor System Integrating Inertial Measurement Units and Computer Vision (IMU-Vision)

An Activity Management System for Office Workers Using Multimodal Data

Evaluation of Smartphone Technology on Spatiotemporal Gait in Older and Diseased Adult Populations

Recognizing Manual Activities Using Wearable Inertial Measurement Units: Clinical Application for Outcome Measurement

Classifying Tasks Performed by Electrical Line Workers Using a Wrist-Worn Sensor: A Data Analytic Approach

Recognition of Daily Activities in Adults With Wearable Inertial Sensors: Deep Learning Methods Study

Learning Activities of Daily Living from Unobtrusive Multimodal Wearables: Towards Monitoring Outpatient Rehabilitation

A 'one-size-fits-most' walking recognition method for smartphones, smartwatches, and wearable accelerometers

Innovative Detection and Segmentation of Mobility Activities in Patients Living with Parkinson's Disease Using a Single Ankle-Positioned Smartwatch

Recognizing Human Activity of Daily Living Using a Flexible Wearable for 3D Spine Pose Tracking

Development and Clinical Evaluation of a Web-Based Upper Limb Home Rehabilitation System Using a Smartwatch and Machine Learning Model for Chronic Stroke Survivors: Prospective Comparative Study (Preprint)

A Multimodal Wearable System for Continuous and Real-Time Breathing Pattern Monitoring During Daily Activity

Development and Clinical Evaluation of a Web-Based Upper Limb Home Rehabilitation System Using a Smartwatch and Machine Learning Model for Chronic Stroke Survivors: Prospective Comparative Study

Combined LIBD and XAFS investigation of the formation and structure of Zr(IV) colloids

Smartphone-Based Assessment of Mobility and Manual Dexterity in Adult People with Spinal Muscular Atrophy

A Combined sEMG and Accelerometer System for Monitoring Functional Activity in Stroke

Development of Wearable Devices for Collecting Digital Rehabilitation/Fitness Data from Lower Limbs

Outdoor activity classification using smartphone based inertial sensor measurements

A Smartphone-Based Adaptive Recognition and Real-Time Monitoring System for Human Activities.

Activity recognition using cell phone accelerometers