Abstract:Temperature is known to have an important effect on the morphology and removal fluxes of conventional, co-diffusional biofilms. However, much less is known about the effects of temperature on membrane-aerated biofilm reactors (MABRs). Experiments and modeling were used to determine the effects of temperature on the removal fluxes, biofilm thickness and morphology, and biofilm microbial community structure of nitrifying MABRs. Steady state tests were carried out at 10°C and 30°C. MABRs grown at 30°C had higher ammonium removal fluxes (5.5±0.9 g-N/m 2 /day at 20 mgN/L) than those grown at 10°C (3.4±0.2 g-N/m 2 /day at 20 mgN/L). The 30°C biofilms were thinner and rougher, with a lower protein to polysaccharides ratio (PN/PS) in their extracellular polymeric substance (EPS) matrix and greater amounts of biofilm detachment. Based on fluorescent in-situ hybridization (FISH), there was a higher relative abundance of nitrifying bacteria at 30°C than at 10°C, and the ratio of AOB to total nitrifiers (AOB + NOB) was higher at 30°C (95.1±2.3%) than at 10°C (77.2±8.6%). Anammox bacteria were more abundant at 30°C (16.6±3.7%) than at 10°C (6.5±2.4%). Modeling suggested that higher temperatures increase ammonium oxidation fluxes when the biofilm is limited by ammonium. However, fluxes decrease when oxygen becomes limited, i.e., when the bulk ammonium concentrations are high, due to decreased oxygen solubility. Consistent with the experimental results, the model predicted that the percentage of AOB to total nitrifiers at 30°C was higher than at 10°C. To investigate the effects of temperature on biofilm diffusivity and O 2 solubility, without longer-term changes in the microbial community, MABR biofilms were grown to steady state at 20°C, then the temperature changed to 10°C or 30°C overnight. Higher ammonium oxidation fluxes were obtained at higher temperatures: 1.91 ± 0.24 g-N/m 2 /day at 10°C and 3.19 ± 0.40 g-N/m 2 /day at 30°C. Overall, this work provides detailed insights into the effect of temperature on nitrifying MABRs, which can be used to better understand MABR behavior and manage MABR reactors.

Effect of temperature shocks on membrane fouling in membrane bioreactors

Effects of Temperature and Feed Strength on a Carrier Anaerobic Baffled Reactor Treating Dilute Wastewater

Effect of Temperature on the Operating Characteristics and Membrane Fouling in Membrane Bioreactor

Impact of Temperature Seasonal Change on Sludge Characteristics and Membrane Fouling in a Submerged Membrane Bioreactor

Effect of Temperature Variation on Membrane Fouling and Microbial Community Structure in Membrane Bioreactor.

The effect of temperature on fouling in anaerobic membrane bioreactor: SMP- and EPS-membrane interactions

How Microbial Community and Membrane Biofouling Respond to Temperature Changes in an Anaerobic Membrane Bioreactor

The Impact of Temperature on Membrane Fouling in Algae Harvesting

Membrane Fouling Related to Microbial Community and Extracellular Polymeric Substances at Different Temperatures

Sludge rheological and physiological characteristics in a pilot-scale submerged membrane bioreactor

Study on membrane fouling characteristics in a submerged membrane bioreactor (MBR)

Changes in Wastewater Treatment Performance and Activated Sludge Properties of a Membrane Bioreactor at Low Temperature Operation

Unravelling temperature-dependent fouling mechanism in a pilot-scale anaerobic membrane bioreactor via statistical modelling

[Effect of Sludge Bulking on Membrane Fouling of MBR under Low Temperature].

Effects of temperature shocks on the formation and characteristics of soluble microbial products in an aerobic activated sludge system

[Effect of Temperature on the Performance and Microbial Community Structure in an Integrated Anaerobic Fluidized-bed Membrane Bioreactor Treating Benzothiazole Wastewater].

Long-Term Investigation into the Membrane Fouling Behavior in Anaerobic Membrane Bioreactors for Municipal Wastewater Treatment Operated at Two Different Temperatures

Assessment of temperature dynamics and microbial community responses in aerobic membrane bioreactors from mesophilic to hyper-thermophilic conditions

Membrane Bioreactors Fed with Different COD/N Ratio Wastewater: Impacts on Microbial Community, Microbial Products, and Membrane Fouling

Membrane Fouling Properties under Different Filtration Modes in a Submerged Membrane Bioreactor

Effects of Temperature on Nitrifying Membrane-Aerated Biofilms: An Experimental and Modeling Study