Abstract:Every accident affecting industrial or nuclear facilities emits micrometric fragments of material into the environment whose elemental and isotopic compositions are characteristic of the process or event. Particle analysis, mainly implemented in the framework of the Non Proliferation Treaty to detect clandestine nuclear activities, provides a powerful tool to identify the origin of the nuclear particulate matter and to assess the environmental impact of nuclear accidents. Initially, particle-scale isotopic analyses aimed at the determination of the U isotopic composition. Now, focus is increasingly given on Pu isotopic measurements to address its origin and potential use. Such measurements are more challenging because of isobaric interferences, including those induced by hydride ions, like 239PuH+ on 240Pu+ and 238UH+ on 239Pu+ in Mixed Oxide (MOX). Such ions are generated during ionization processes by Secondary Ion Mass Spectrometry. Based on a parametric study aiming at the measurement of uranium oxide, uranium carbide and uranium single and double hydride rates, we determined that Pu and U should be detected as elementary ions to limit the impact of such interferences, although mono-oxide ions are more abundant. Thus, we developed an analytical methodology to obtain accurate 240Pu/239Pu atomic ratios both for weapon grade Pu and MOX materials. Hydride rate is first measured in U oxide particles and then applied to correct 240Pu+ and 239Pu+ signals. The relative difference of corrected 240Pu/239Pu isotopic ratios with expected values is reduced by a factor of 4 when measuring weapon grade Pu particles and by a factor of 10-100 when measuring MOX particles containing 1 to 10 wt% of Pu. We also proposed a method to determine the Relative Sensitivity Factor (RSF) based on the decay of Pu in order to quantify the Pu content in MOX samples. The estimated lowest measurable 239Pu/238U atomic ratio in MOX particles is ∼1.6 × 10-3.

Conversion electron spectrometry of Pu isotopes with a silicon drift detector

Measurement of the 240Pu/239Pu mass ratio using a transition-edge-sensor microcalorimeter for total decay energy spectroscopy

Isotopic Ratio of ~(240)Pu/~(239)Pu Measurements under Interference of Uranium by Inductively Coupled Plasma-Mass Spectrometry with Direct Sampling Insertion

Neutron spectroscopy of plutonium using a handheld detection system

Quantitative XPS of plutonium: Evaluation of the Pu4f peak shape, relative sensitivity factors and estimated detection limits

Gamma-Ray Spectrometric Determination of Isotopic Ratios of Plutonium

240Pu/239Pu isotopic ratio measurements in micrometric Pu and MOX particles using Secondary Ion Mass Spectrometry

Determination of plutonium isotopic composition by gamma-ray spectroscopy

Ultra-trace analysis of plutonium by thermal ionization mass spectrometry with a continuous heating technique without chemical separation

Determination of Plutonium Isotopes (Pu-238, Pu-239, Pu-240, Pu-241) in Environmental Samples Using Radiochemical Separation Combined with Radiometric and Mass Spectrometric Measurements

Determination of Plutonium Isotopes (238pu, 239pu, 240pu, 241pu) in Environmental Samples Using Radiochemical Separation Combined with Radiometric and Mass Spectrometric Measurements

Determination of Pu isotope concentrations and isotope ratio by inductively coupled plasma mass spectrometry: a review of analytical methodology

A New Isotope Mass Spectrometer with A Thermal Ionization Cavity Ion Source and Magnetic-Electronic Double-Focus Analyzer for Trace Analysis

Reaching environmental levels of 244Pu by accelerator mass spectrometry at the Centro Nacional de Aceleradores

Non-destructive assay of plutonium in absence of gamma-ray spectrometry

Detection of 238Pu at picogram quantities by laser resonance ionization mass spectrometry

Analysis of Sub-picogram Plutonium by Isotope Mass Spectrometry

Alpha spectrometry and liquid scintillation counting for the measurement of 238Pu, 239Pu, 240Pu, 241Pu, 242Pu and age

Rapid and Simultaneous Determination of 238Pu, 239Pu, 240Pu, and 241Pu in Samples with High-Level Uranium Using ICP-MS/MS and Extraction Chromatography

A Rapid Method for Quantification OF 242Pu in Urine Using Extraction Chromatography and ICP-MS

Study of alpha-particle emission probabilities and energies in the decay of 240Pu