Abstract:Ultrahigh-voltage lithium metal batteries based on a cobalt-free LiNi0.5Mn1.5O4 (LNMO) cathode (5 V-class, vs. Li+/Li) and lithium metal anode (-3.04 V vs. the standard hydrogen electrode) have attracted extensive attention in recent years as promising candidates for the next-generation high energy density and sustainable batteries owing to their high theoretical energy density of similar to 650 W h kg-1, elimination of toxic Co elements and intrinsic safety caused by the LNMO spinel structure compared with the unstable layered oxide LiNixCoyMnzO2. However, their development is critically limited by the incompatibility between state-of-the-art carbonate electrolytes and the two aggressive electrodes. Herein, we synthesized a new electrolyte additive, i.e. 2,2-difluoroethyl methyl sulfone (FS), which could enable ultrahigh-voltage lithium metal batteries to stably cycle in conventional carbonate electrolytes. On the cathode side, unlike conventional electrolyte additives, FS could be selectively adsorbed on the LNMO surface and form a special assembled FS "buffer" layer, which could efficiently exclude free carbonate molecules away from the cathode surface. Therefore, upon charging, the -CF2H group of FS is preferably anodically decomposed to form an inorganic-rich CEI, which efficiently suppresses the micro-fracture and transition metal dissolution of LNMO. On the anode side, FS could also be preferably cathodically decomposed, resulting in an inorganic-rich SEI for the stable cycling of the Li metal anode. Thus, carbonate electrolyte with the FS additive enables the unprecedented high performance of cobalt-free 5 V-class lithium metal batteries, i.e. a 40 mu m-Li/LNMO (loading = 7 mg cm-2) full cell with a high capacity retention of 84% over 600 cycles at 1C using commercial a carbonate-based low-concentration electrolyte. The full cell consisting of a high-loading cathode (20 mg cm-2) and an ultrathin Li anode (40 mu m) achieves a capacity retention of 99% after 100 cycles at 0.25C. Moreover, Li/LNMO pouch cells, which have not been reported before to the best of our knowledge, are assembled and can operate stably for over 150 cycles. We rationally designed a semi-fluorinated sulfone electrolyte additive, i.e. 2,2-difluoroethyl methyl sulfone (FS), which can meet the harsh demand for Li/LNMO 5V class lithium metal batteries.

Inhibitive role of crystal water on lithium storage for multilayer FeC2O4·xH2O anode materials

Effect of Binding Affinity of Crystal Water on the Electrochemical Performance of Layered Double Hydroxides.

Hierarchical MOF-derived Layered Fe3O4 QDs@C Imbedded on Graphene Sheets As a High-Performance Anode for Lithium-ion Storage

Coordinate regulation of amorphous carbon microspheres and crystal structure of iron oxalate for high rate lithium storage ability

Stabilizing Layered Structure in Aqueous Electrolyte via Dynamic Water Intercalation/Deintercalation

Thermodynamically Spontaneously Intercalated H3O+ Enables LiMn2O4 with Enhanced Proton Tolerance in Aqueous Batteries

Water-Mediated Surface Engineering Enhances High-Voltage Stability of Fast-Charge LiCoO2 Cathodes

Water-soluble salt-templated strategy to regulate mesoporous nanosheets-on-network structure with active mixed-phase CoO/Co3O4 nanosheets on graphene for superior lithium storage

On the enhanced electrochemical properties of dihydrate hydroxyl ferric phosphate: Effects of intrinsic crystal water and additive graphene oxide

Overcrowded Additive in Electrolyte and Crystalline Li2CO3 Artificial Solid Electrolyte Interphase on TiNb2O7 Anode Enable Long Lifespan Aqueous Lithium-Ion Batteries

Overcrowded Additive in Electrolyte and Crystalline Li 2 CO 3 Artificial Solid Electrolyte Interphase on TiNb 2 O 7 Anode Enable Long Lifespan Aqueous Lithium-Ion Batteries

In–situ Construction of LixFeyOz Coatings on Cobalt–free Lithium–rich Cathode Materials for Enhanced Structural Stability and Electrochemical Performance

Uncovering the Fundamental Role of Interlayer Water in Charge Storage for Bilayered V2O5 · Nh2o Xerogel Cathode Materials

Carbon-coated Fe3O4 nanocomposites anchored on Ti3C2 nanosheets for enhanced Li-storage

Fe3O4@C-500 anode derived by commercial ammonium ferric citrate for advanced lithium ion batteries

Design and Construction of Carbon‐Coated Fe3O4/Cr2O3 Heterostructures Nanoparticles as High‐Performance Anodes for Lithium Storage

A Layered-Spinel Lithium Manganite Hydrate for High-Capacity and Ultrafast Lithium Storage

Inhibition Of Transition Metals Dissolution In Cobalt-Free Cathode With Ultrathin Robust Interphase In Concentrated Electrolyte

A Comparative Study of Degradation Behaviors of LiFePO 4 , LiMn 2 O 4 , and LiNi 0.8 Mn 0.1 Co 0.1 O 2 in Different Aqueous Electrolytes

Inhibition of transition-metal dissolution with an inert soluble product interface constructed by high-concentration electrolyte

Rational Molecular Design of Electrolyte Additive Endows Stable Cycling Performance of Cobalt-Free 5 V-class Lithium Metal Batteries