Abstract:The study of the dynamic response characteristics of "W"-type deep canyon terrain to double-span concrete arch bridges under earthquake action holds great practical significance. In this research, a bridge in Sichuan Province is taken as the object of study. The boundary-integral equation method and peak frequency shift method are combined to apply an embedded linear time–history analysis algorithm to the finite element spatial dynamic calculation model of the entire bridge, resulting in an improved model. By comparing these two methods with model test results, the seismic response characteristics of the middle part of a "W" concrete arch bridge under different foundation depths and seismic intensities are examined. The boundary integral equation method was utilized to calculate ground motion response at any point on site, revealing a significant amplifying effect of increased seismic wave intensity on acceleration response at the top of the arch bridge. When input seismic wave intensity increased from 0.1 g to 0.3 g, maximum acceleration at buried depths of 3 m and 8 m in the middle of the arch bridge foundation increased by 102.63% and 79.16%, respectively, indicating that shallow buried depth structures are more sensitive to seismic wave intensity. Furthermore, using peak frequency shift rules for analyzing seismic wave propagation characteristics in "W"-type deep canyon topography confirms the sensitivity of shallow buried depth structures to seismic wave intensity and reveals the mechanism through which topography influences seismic wave propagation. This study provides a helpful method for understanding the propagation law and energy distribution characteristics of seismic waves in complex terrain. It was observed that the displacement at the top of the arch bridge increased significantly with an increase in seismic intensity. When subjected to 0.1 g, 0.2 g, and 0.3 g EI-Centro seismic waves, the maximum displacement at the top of the arch bridge model with a foundation buried depth of 3 m was 8 mm, 32 mm, and 142 mm, respectively. For arch bridge models with an 8-m foundation buried depth, these displacements were measured at 6.2 mm, 21 mm, and 68 mm, respectively. The results from model tests verified that increasing the depth of foundation burial effectively reduces the displacement at the top of the structure. Furthermore, by combining a boundary-integral equation method and peak-frequency shift method, this study accurately predicted significant influences on W-shaped double deep canyon topography from seismic response, and successfully captured stress concentration and seismic wave amplification/focusing effects on arch foot structures. The calculated results from both methods align well with model test data which confirm their effectiveness and complementarity when analyzing seismic responses under complex terrain conditions for bridge structures.

Effect of a V‐shaped canyon on the seismic response of a bridge under oblique incident SH waves

Seismic response sensitivity of a V-shaped canyon-crossing bridge considering the near-source canyon topographic effects

Stochastic seismic responses analysis of long-span rigid-framed bridge with high piers considering travelling wave effect

Experimental Study and Numerical Analysis of A Composite Bridge Structure

Effects of topographic amplification induced by a U-shaped canyon on seismic waves

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Study on Ground Motion Amplification in Upper Arch Bridge Due to "W"-Type Deep Canyon Using Boundary-Integral and Peak Frequency Shift Methods

Stochastic Seismic Response Analysis of Long-span Continuous Rigid Frame Bridge

Parametric study of topographic effect on train-bridge interaction of a continuous rigid frame bridge during earthquakes

Seismic Analysis of Long Span Continuous Rigid-Frame Bridge with Thin-Walled High Piers

Seismic responses of bridges crossing faults and their best crossing angles

Effect of Soil–Bridge Interactions on Seismic Response of a Cross-Fault Bridge: A Shaking Table Test Study

Damage Analysis of High-Speed Railway Bridge-Track System with Unequal Pier Heights Under Near-Fault Earthquake Based on FK-FE Method

Study of Dynamic Behavior and Influences Induced by Structural Parameter Variations of Self-Anchored Suspension Bridge

Dynamic Response Analysis of Long-Span Continuous Bridge Considering the Effect of Train Speeds and Earthquakes

Dynamic Responses of Bridge–Tunnel Overlapping Structure for High-Speed Railway Under Different Seismic Excitations

Shake-Table Test for a Typical Curved Bridge: Wave Passage and Local Site Effects

Seismic response analysis of long-span and asymmetrical suspension bridges subjected to near-fault ground motion

Effects of Canyon Topography and Geological Conditions on Strong Ground Motion

Numerical Investigation of Tsunami Wave Force Acting on Twin Box-Girder Bridges

Study on Seismic Response of Complex Site Environment in Mountain Area with High Seismic Intensity