Abstract:Some numerical simulations of drained and undrained triaxial tests on granular materials with different initial densities are carried out with the three-dimensional discrete element method. An in-depth particle-scale analysis is performed quantitatively to illustrate the physical mechanism of the shear mechanical behaviors, with a special attention paid to the characteristics of quasi-steady state and critical state. The simulation results show that the initial density and shear drainage condition both have significant effects on the evolution of stress–strain, coordination number, fabric anisotropy factor, force chains and clusters. The chained grains ratio and the mean length of force chains in the specimens are constantly adjusted to bear and transfer the changing external loads. The transitions between small clusters and large clusters are also continually taking place in varying degrees, correlating to volumetric contraction or dilation. For the loose undrained triaxial specimen presenting quasi-steady state during shearing, the coordination number decreases obviously to nearly 4 and then increases again; the chained grains ratio decreases after a slight increase in the initial loading stage, and then begin to increase again after a period of lower value of around 0.285; the volume ratio of small, submedium and medium clusters all first decreases and then increase gradually, meanwhile volume ratio of large clusters increases sharply to as much as 0.28 and then decreases gradually. The macroscopic critical state of granular materials is a comprehensively external manifestation when the microscopic coordination number and mesoscopic force chains and clusters all evolute to a dynamic equilibrium. At the critical state, the deviator stress, void ratio, coordination number, fabric anisotropy factor, and the volume ratio of small clusters and large clusters all manifest a respectively unique linear relationship with the mean effective stress.

Study of shear behavior of granular materials by 3D DEM simulation of the triaxial test in the membrane boundary condition

Particle Shape Effects on the Shear Behaviors of Granular Assemblies: Irregularity and Elongation

Discrete Element Simulations of Drained Granular Material Response under Multidirectional Rotational Shear

The Influence of Particles' Aspect Ratio on the Shear Behaviour of Granular Materials

Rotational Resistance and Shear-Induced Anisotropy in Granular Media

Novel Undrained Servomechanism in Discrete-Element Modeling and Its Application in Multidirectional Cyclic Shearing Simulations

Undrained Cyclic Behavior of Granular Materials Considering Initial Static Shear Effect: Insights from Discrete Element Modeling

The Influence of Particle-Size Distribution on Critical State Behavior of Spherical and Non-Spherical Particle Assemblies

Undrained Responses of Anisotropic Granular Material under Rotational Shear by DEM

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Numerical Simulations of Granular Material Behavior under Rotation of Principal Stresses: Micromechanical Observation and Energy Consideration

The Influence of Particle Elongations on Direct Shear Behaviour of Granular Materials Using DEM

Study of Shear Behavior of Binary Mixtures by DEM Simulation of Biaxial Test in the Membrane Boundary Condition

KEY TECHNIGUES STUDY OF PARTICLE FLOW SIMULATION FOR THREE-DIMENSIONAL HOLLOW TORSIONAL SHEAR TEST

DEM study on the microscale and macroscale shear behaviours of granular materials with breakable and irregularly shaped particles

3D DEM-based particle-scale analysis of drained and undrained triaxial behaviors of granular materials

Systematic investigation into the role of particle multi-level morphology in determining the shear behavior of granular materials via DEM simulation

Effect of Particle Shape on Contact Network and Shear-Induced Anisotropy of Granular Assemblies: A DEM Perspective

Investigating the effects of elongation and flatness on the shear behaviour of breakable granular materials via the DEM

Flexible membrane boundary condition DEM-FEM for drained and undrained monotonic and cyclic triaxial tests

Influence of particle shape on the shear behavior of superellipsoids by discrete element method in 3D