Abstract:Due to the pressing issue of global warming, there has been a significant focus on zero and low carbon fuels within the international community. Among the hydrocarbon fuels available, methane has gained wide usage in spark ignition engines due to its abundance and its relatively smaller hydrocarbon mass ratio. However, in order to further mitigate carbon emissions, there is growing interest in exploring the potential of using ammonia, a zero-carbon fuel, as a partial replacement for methane. Consequently, it is essential to investigate the impact of ammonia addition on the performance of natural gas spark ignition engines. One of the key challenges in studying ammonia/methane engines is that the introduction of ammonia alters the formation mechanism of nitrogen oxides (NOx) and leads to a coupling of fuel NOx and thermal NOx. Consequently, there has been limited research on the NOx emissions of ammonia/methane engines. This study successfully addresses this issue by differentiating between atmospheric nitrogen and fuel nitrogen elements and effectively decoupling the thermal/fuel NOx. This approach provides valuable insights into the effect of ammonia addition on the NOx characteristics of natural gas engines. The results indicate that the addition of ammonia introduces the presence of N2O species, which is not observed in methane engines. The N2O species primarily originates from the cold wall regions formed during the late oxidation process. Furthermore, although ammonia addition increases the concentration of NO in the burning zone, it appears to slightly reduce the NO concentration at chemical equilibrium at stoichiometric operation. This effect leads to stoichiometric-operated engines fueled with 80% methane and 20% ammonia exhibiting lower NOx emissions compared to those fueled with pure methane. These findings suggest that even a modest addition of 20% ammonia to methane fuel has a significant impact on the formation and evolution of NOx, highlighting the need for further studies to explore the NOx emission characteristics in ammonia/methane spark ignition engines.

Impact of nitromethane additive on ANFO performance

Effect of nitromethane on fuel/air explosion characteristics under different ambient conditions

Influence of the Nano-Iron Oxide Adsorption-Enhanced Microstructured Charcoal Additives on the ANFO's Properties

The promotion of nitromethane on solid–liquid fuel/air mixtures explosion characteristics under different ambient conditions

Effects of additives on detonator initiation sensitivity and work capacity of ANFO

Numerical Investigation of the Effect of Ammonia Addition on the Performance of a Stoichiometric Operated Natural Gas Spark Ignition Engine

Effect of nitroethane on explosion parameters of multi-component mixed fuel aerosol

Explosion Limits of Binary Mixtures of Ammonia and Additives (hydrogen, Natural Gas, and Diethyl Ether)

Enhancing the Detonation Properties of Liquid Nitromethane by Adding Nitro-Rich Molecule Nitryl Cyanide

Manifestations of replacing 2,4,6-trinitrotoluene by 2,4-dinitroanisole (DNAN) in compositions based on several interesting nitramines

Enhancing burning rate of ammonium nitrate by ammonia borane: Mechanism from reactive molecular dynamics simulation

Formulation of Modified Nitromethane Liquid Explosives Using Stimulation Technology of Exploding in Fracture

Computational and Theoretical Evaluation of the Effect of DIAZ-4 and DNT on the Thermodynamic Characteristics of Model Compositions Filled with Explosives of Reduced Vulnerability

Assessment of the impact of the comminution of property modifiers - plastics used in ANFO, on the energy parameters of the high-energy materials

Effect of metal powders on explosion of fuel-air explosives with delayed secondary igniters

Explosion characteristics of H2/CH4/N2O at fuel-lean and stoichiometric conditions

Detonation Performance of Insensitive Nitrogen-Rich Nitroenamine Energetic Materials Predicted from First-Principles Reactive Molecular Dynamics Simulations

Characterization of an Ignition System for Nitromethane-Based Monopropellants

Effect of nitrogen on deflagration characteristics of hydrogen / methane mixture

Analysis and performance assessment of the use of ammonia-based nano additive for lean combustion

Detonation Characteristics of an Aluminized DNAN‐Based Melt‐Cast Explosive