Abstract:ABSTRACT Experimental foundation has been established for improving corrosion models for stainless steels exposed to in neutral aqueous chloride media with low levels of dissolved oxygen. Accurate repassivation potentials were measured for UNS S31603 and UNS S32205 alloys in chloride electrolytes at room and elevated temperatures using Tsujikawa-Hisamatsu Electrochemical (THE) and Cyclic Potentiodynamic Polarization (CPP) methods. It was observed that the repassivation potential values measured using the CPP method were lower than the ones obtained from THE method for the same environmental conditions. Cyclic polarization scans in aqueous chloride media were conducted at different reverse scan rates resulting in varied repassivation potentials. Medium-term corrosion potentials were measured in chloride media with controlled dissolved oxygen levels ranging from 20 to 400 ppb. These results were used as inputs for improving model prediction for repassivation and corrosion potentials. In an extension of previous modeling studies, an improved mechanistic repassivation model was developed based on a new generalized theory that explicitly accounts for the adsorption of water rather than treating it as an ever-present background. With a flexible definition of the repassivation current density, the new repassivation model reproduces the experimental repassivation potentials obtained using THE and CPP methods. Dependence of corrosion potential on dissolved oxygen has been modeled using a mixed-potential model. It has been demonstrated that the effect of agitation (caused by bubbling of oxygen) needs to be accounted for to describe the corrosion potential, especially at low dissolved oxygen where mass transport is important. The combined model correctly predicts the occurrence of localized corrosion when tested against exposure data from literature.

Application of Measurement Models for Analysis of Impedance Spectra

An Assessment of Commonly Used Equivalent Circuit Models for Corrosion Analysis: A Bayesian Approach to Electrochemical Impedance Spectroscopy

Bayesian assessment of commonly used equivalent circuit models for corrosion analysis in electrochemical impedance spectroscopy

Modeling and applications of Electrochemical Impedance Spectroscopy (EIS) for Zinc-ion batteries

Experimental Observation of Ohmic Impedance

Impedance spectroscopy: Models, data fitting, and analysis

Applications of Impedance Spectroscopy

Modeling and Interpretation of Responses of Concretes in Four‐Probe Impedance Measurements

Comparison of Approaches for Assessing Linearity of Impedance Measurements

Corrosion current level estimation of rust samples using inverse dielectric spectroscopy

Electrochemical Impedance Spectroscopy Characteristics of Corrosion Behavior of Rebar in Concrete

Improved Test Methods and Models for Localized Corrosion Assessment of Stainless Steels in Aqueous Chloride Media with Low Dissolved Oxygen

Unified Model for Transient Faradaic Impedance Spectroscopy: Theory and Prediction

Application of EIS to localized corrosion

Hybrid model development emulating linear polarization resistance method towards optimizing dosages of corrosion inhibitors

Electrochemical impedance spectroscopy beyond linearity and stationarity - a critical review

Interpretation of Electrochemical Impedance Spectroscopy in Coating/Metal System by Cr Transmission Line Model

Extending the double-dispersion Cole-Cole, Cole-Davidson and Havriliak-Negami electrochemical impedance spectroscopy models

Corrosion rates under charge-conservation conditions

Electrochemical Impedance Spectroscopy (EIS): A Review Study of Basic Aspects of the Corrosion Mechanism Applied to Steels

On accurate differential measurements with electrochemical impedance spectroscopy