Abstract:Building external walls and fire insulation are important components of a low carbon economy. Once a fire occurs in the building, the ejected flame from the opening of the building can easily ignite the building external wall insulation materials and further resulting the catastrophic large-scale facade fire. The paper investigates experimentally the temperature evolution within fire compartment, the external flame merging behavior and the structure characteristic (height/area) ejected through multiple-openings comprehensively for various numbers of openings and separation distances (with a fixed overall opening size) and fire heat release rates with a total of 272 conditions. A rectangle reduced-scale fire compartment and an external facade was designed with various multi-opening conditions (numbers of openings, separations). Results show that the upper-part temperature within fire compartment first increases and then changes a little around 1000 K, it is correlated well by the heat release rate and heat loss per unit time for over-ventilated conditions, while it correlated well with the opening factor for under-ventilated condition. Regardless of the number of openings, it only depends on the overall opening size. The external flame merging probability increases (from 0 to 1) with increasing number of openings and fire HRR, which correlated well as a function of the non-merging flame height from a single opening (or the flame upward velocity) and the separation distances between the adjacent two openings. The external flame height decreases (about from 1.0 m to 0.3 m) with increasing number of openings. A new characteristic length scale, considering the multiple rectangle fire sources at the neutral plane was proposed to describe the external flame height. The external flame area is further estimated based on the flame height and the merging probability. The experimental data and correlations obtained in this paper contribute a fundamental basis for quantifying the characteristics of the building fire, selection of building external wall insulation materials and building energy saving.

Fire test study of full-scale air-supported membrane structure in large space

Study on Membrane Damage and Collapse of Air-Supported Structures under Fire Conditions

Thermal-mechanical Coupling Analysis of Membrane Surface Failure of the Air-Supported Membrane Structure under Fire Considering Weld Seams

Fire Simulation Test and Analysis of Laminated Bamboo Frame Building

Experimental research on fire safety of lightweight bamboo frame buildings

Deflation Behavior and Related Safety Assessment of an Air-Supported Membrane Structure

Test Study and Numerical Simulation of Deflation Process of an Air-Supported Membrane Structure

Residual Strength Prediction and Structural Response of a Multi-Chamber Cabin to a Fire

Scale test of large space stainless steel structure subjected to natural fire

Coupling Thermal and Mechanical Effect on Structural Fire Safety

Research on Mechanical Behavior of the Steel-Concrete-Steel Composite Structures Subjected to High Temperature of Fire

Experimental Investigation of the Structural Response of a Steel-Framed Building Subjected to Traveling Fire

Estimation and research of the temperature field models of large space spherical mesh shell structures under localized fire

Experimental and simulation analysis of the initial shape of a large-span air-supported membrane structure

Space temperature field and structure response of multi-chamber cabin subjected to fire

Development for Comprehensive Health Monitoring System for a New Air-supported Membrane Structure Hall

Dynamic Deflation Assessment of an Air Inflated Membrane Structure

Safety and serviceability of membrane buildings: A critical review on architectural, material and structural performance

Temperature Evolution Within Fire Compartment, External Flame Structure Characteristic and Merging Behavior with Multiple-Openings

An Integrated Model for the Fire Safety Analysis of Large Space Buildings

Fluid-structure Interaction Analysis of Large-Span Air-Supported Membrane Structures under Typhoon Conditions