Abstract:Nano-materials are increasingly being used as modified binder for improve the performance of cementitious materials. In this paper, nano-SiO2 and nano-Al2O3 were incorporated into the geopolymers formed by the mixture of construction solid waste (recycled concrete fine powder) and industrial solid waste (slag). The effects of the type and content of nanomaterials on the early reaction kinetics, physical and mechanical properties and microstructure of geopolymer composites were explored. Results show that the addition of nanomaterials mainly affected the dissolution stage of geopolymerization, played a nucleation effect and improved the reaction rate. The promotion effect of nano-Al2O3 was slightly greater than that of nano-SiO2. Based on the results of JMAK model, the formation of geopolymers composites was an one-dimensional heterogeneous nucleation control reaction, which followed a plate-like structure thickening mechanism. The addition of nanomaterials shortened the setting time. The incorporation of nano-Al2O3 was beneficial to improve the fluidity of geopolymer. Furthermore, the addition of the two nanomaterials could improve the compressive strength of geopolymers. The compressive strength tended to first increase and then decrease with increasing nano-SiO2 or nano-Al2O3 content. The optimal mixing ratio of nano-silica and nano-alumina were 1.2% and 1.6% respectively, and the 28-day compressive strengths were both 59.05 MPa, which were 23.35% higher than that without nano-materials. XRD and SEM-EDS analysis indicate that the incorporation of nanomaterials had no impact on the type of final products, but increased their number, particularly calcium-based gel products. The internal structure of geopolymer with nanomaterials was more dense and uniform than that without nanomaterials. The MIP observed that the addition of the two nano-materials reduced the porosity in the matrix, the number of macropores and the pore fractal dimension. The pore fractal dimension of geopolymer was negatively correlated with the compressive strength.

A novel self-cleaning ceramic waste-slag geopolymer with nano-SiO2-TiO2 photocatalytic coating

Utilization of municipal solid waste incineration fly ash with red mud-carbide slag for eco-friendly geopolymer preparation

Synthesis of Geopolymers Using Municipal Solid Waste Incineration Fly Ash and Construction and Demolition Waste: Mechanical and Thermal Activation

Strength and microstructural analysis of geopolymer prepared with coal-based synthetic natural gas slag

A Porous Geopolymer Containing Ti-Bearing Blast Furnace Slag: Synthesis, Characterization, and Adsorption-Photodegradation Studies towards Methylene Blue Removal under Visible Light Condition

Investigation of mechanical, microscopic, and leaching properties of coal-based solid waste geopolymer mortar activated by soda residue and phosphogypsum

Synthesis of geopolymer using municipal solid waste incineration fly ash and steel slag: Hydration properties and immobilization of heavy metals

Reaction kinetics, mechanical properties, and microstructure of nano-modified recycled concrete fine powder/slag based geopolymers

Synthesis and Performance Evaluation of Nano-Calcium Carbonate-Modified Geopolymers Incorporating Fly Ash and Manganese Slag: A Comprehensive Investigative Study

Preparation and curing method of red mud-calcium carbide slag synergistically activated fly ash-ground granulated blast furnace slag based eco-friendly geopolymer

Mechanical and microstructural characterization of geopolymers synthesized from FCC waste catalyst and silica fume

Effect of CaO/Na2SiO3 ratio on mechanical properties, microstructures and environmental leaching characteristics of neutralization slag based geopolymers

Preparation of eco-friendly porous ceramic with low thermal conductivity by high-temperature treatment of foamed solid waste based geopolymer with cenospheres

Effect of desulphurization gypsum on hardening mechanism of the geopolymer produced with steel slag and granulated blast furnace slag

Cleaner geopolymer prepared by co-activation of gasification coal fly ash and steel slag: durability properties and economic assessment

Sludge‐based geopolymer materials: A review

Development of a High Strength Geopolymer Incorporating Quarry Waste Diabase Mud (DM) and Ground Granulated Blast-Furnace Slag (GGBS)

Properties and Cementation Mechanism of Geopolymer Backfill Paste Incorporating Diverse Industrial Solid Wastes

Synthesis of geopolymer-zeolite composite from municipal solid waste incineration fly ash and their performance for CO 2 adsorption

Mechanical behavior and microstructure evolution of slag-fly ash based geopolymer stabilized sand

Advancing self-cleaning performance in metakaolin-based geopolymers through in-situ zeolite formation and TiO 2 integration