Reactive transport modelling of long-term interactions between iron and MX-80 bentonite
M. Carme Chaparro,Nicolas Finck,Volker Metz,Horst Geckeis
DOI: https://doi.org/10.5194/sand-1-169-2021
2021-11-10
Safety of Nuclear Waste Disposal
Abstract:Abstract. The geological disposal in deep bedrock repositories is the preferred option for the management of high-level radioactive waste. In some of these concepts, carbon steel is considered as potential canister material and bentonites are planned as backfill material to protect metal waste containers. Therefore, a 1D radial reactive transport model has been developed in order to better understand the processes occurring during the long-term iron–bentonite interaction. The conceptual model accounts for diffusion, chemistry of the porewater and aqueous complexation reactions, mineral dissolution/precipitation and absorption, at a constant temperature of 25 ∘C under anoxic conditions. The geometry of the axisymmetric model reflects the canister–bentonite interface and the bentonite. The primary phases considered are montmorillonitic smectite, quartz, muscovite, albite, illite, pyrite and calcite. We assume that carbon steel is composed only of iron. The potential secondary phases considered are from reported experiments, such as magnetite, nontronitic smectite, greenalite, cronstedtite and siderite. The numerical model results suggest that at the iron–bentonite interface, Fe is adsorbed at the smectite surface via ion exchange in the short term and it is consumed by formation of the secondary phases in the long term. Furthermore, calcite precipitates are due to cation exchange in the short term and due to montmorillonitic smectite dissolution in the long term. The numerical model predicts the precipitation of nontronitic smectite, magnetite and greenalite as corrosion products. Results further reveal a significant increase in pH in the long term, whereas dissolution/precipitation reactions result in limited variations of the porosity. Progressing bentonite dissolution owing to the rising pH and concomitantly increasing silicate concentrations in the porewater induce formation of Fe-silicates as corrosion products at the expense of magnetite. A sensitivity analysis has also been performed to study the effect of selected parameters, such as corrosion rate, diffusion coefficient and composition of the porewater, on the corrosion products. Overall, outcomes suggest that pH and concentration of dissolved Si play an important role in corrosion mechanisms. The predicted main secondary phases in the long term are Fe-silicate minerals. Thus, such phases deserve further attention as possible chemical barriers for radionuclide migration in the repository near-field.