Abstract:Cartilage injury is a common occurrence in the modern world. Compared with traditional treatment methods, bio-3D printing technology features better utility in the field of cartilage repair and regeneration, but still faces great challenges. For example, there is currently no means to generate blood vessels inside the scaffolds, and there remains the question of how to improve the biocompatibility of the generated scaffolds, all of which limit the application of bio-3D printing technology in this area. The main objective of this article was to prepare sodium alginate-xanthan gum-hydroxyapatite (SA-XG-HA) porous cartilage scaffolds that can naturally degrade in the human body and be used to promote cartilage damage repair by 3D printing technology. First, the viscosities of SA and XG were analyzed, and their optimal ratio was determined. Second, a mathematical model of the hybrid slurry was established based on the power-law fluid model, in which the printing pressure, needle movement speed, and fiber spacing were established as important parameters affecting the printing performance of the composite. Third, by performing a finite element simulation of the printing process and combining it with the actual printing process, suitable printing parameters were determined (air pressure of 1 bar, moving speed of 9 mm/s, line spacing of 1.6 mm, and adjacent layers of 0-90°). Fourth, composite scaffolds were prepared and tested for their compressive properties, degradation properties, cytotoxicity, and biocompatibility. The results showed that the novel composite scaffolds prepared in this study possessed good mechanical and biological properties. Young's modulus of the composite scaffolds reached 130 KPa and was able to maintain a low degradation rate in simulated body fluid solution for >1 month. The activity of the C5.18 chondrocytes in the scaffold leach solution exceeded 120%. The cells were also able to proliferate densely on the scaffold surface.

3D Bioprinting-Based Dopamine-Coupled Flexible Material for Nasal Cartilage Repair

A multicrosslinked network composite hydrogel scaffold based on DLP photocuring printing for nasal cartilage repair

Nasal Cartilage Tissue Engineering Materials Based on 3D Bioprinting: Seed Cells and Decm

3D Printing of Biomimetic Multi-Layered GelMA/nHA Scaffold for Osteochondral Defect Repair

Progress of 3D Printing Techniques for Nasal Cartilage Regeneration

3D bioprinting by reinforced bioink based on photocurable interpenetrating networks for cartilage tissue engineering

Structurally and Functionally Optimized Silk-Fibroin-Gelatin Scaffold Using 3D Printing to Repair Cartilage Injury In Vitro and In Vivo.

An overview of nasal cartilage bioprinting: from bench to bedside

BC enhanced photocurable hydrogel based on 3D bioprinting for nasal cartilage repair

3D Bioprinting of Hydrogels for Cartilage Tissue Engineering

Fabrication of 3D-Printed Interpenetrating Hydrogel Scaffolds for Promoting Chondrogenic Differentiation

3D Printing for Bone-Cartilage Interface Regeneration

Research on Cartilage 3D Printing Technology Based on SA-GA-HA

3D Printing Process Research and Performance Tests on Sodium Alginate-Xanthan Gum-Hydroxyapatite Hybridcartilage Regenerative Scaffolds

3D Bioprinting of Bone Marrow Mesenchymal Stem Cell-Laden Silk Fibroin Double Network Scaffolds for Cartilage Tissue Repair

Recent advances in 3D bioprinted cartilage-mimicking constructs for applications in tissue engineering

Direct 3D Printing of High Strength Biohybrid Gradient Hydrogel Scaffolds for Efficient Repair of Osteochondral Defect

3D Bioprinting Photo-Crosslinkable Hydrogels for Bone and Cartilage Repair

In situ repair of bone and cartilage defects using 3D scanning and 3D printing

Multi-material 3D bioprinting of porous constructs for cartilage regeneration

3D printing of recombinant collagen/chitosan methacrylate/nanoclay hydrogels loaded with Kartogenin nanoparticles for cartilage regeneration