Abstract:In vitro compartmentalisation is an emerging technology for protein evolution and selection. In this presentation, we will report the development of a microdrop-based microfluidic plat- form for in vitro enzyme evolution and selection applications. A microfluidic chip has been developed and fabricated using the standard photolithography method in conjunction with electro- plating and hot embossing techniques. A cross channel geome- try was used to focus liquid flows for droplet generation. To realize on-chip compartmentalised bio-reactions, two droplet generators were fabricated on the same chip. Experiments have been carried out to measure droplet size, generation rate and speed using a photographic technique. Droplet size was found to be decreasing with increasing focusing oil flow rate for a given aqueous phase flow rate. When two droplet generators are used in the same chip, the droplets may be generated asyn- chronously due to different flow conditions. If the droplets were significantly smaller than channel size, the faster moving droplets could pass the slower moving droplets with little co- alescence. If the droplets were of the channel size, the faster moving droplets would break or fuse with the slow droplets. To achieve high rate of droplet fusion, active control should be in place for synchronous generation and fusion. The Synthetic Enzymes initiative in CSIRO is a multi- institutional effort aiming to develop enzymes with dramatically shifted functions or mechanisms that are capable of catalysing novel reactions not known in nature. This will be achieved by developing technology to introduce novel chemical groups to enzymes to synthesise enzymes using highly controllable cell- free methods, and to evolve enzymes using IVC technology. This paper will report some of the results in the IVC chip de- velopment. In particular, we will present some of the data on behaviour of droplets transport in microchannels. Chip design and fabrication

Continuous transfer of liquid metal droplets across a fluid-fluid interface within an integrated microfluidic chip

Capillary-Based Microfluidic Fabrication of Liquid Metal Microspheres Toward Functional Microelectrodes and Photothermal Medium.

A Micro-Needle Induced Strategy for Preparation of Monodisperse Liquid Metal Droplets in Glass Capillary Microfluidics

On-Chip Production of Size-Controllable Liquid Metal Microdroplets Using Acoustic Waves

Synthesis of scalable microdroplets with fluid instability of shearing flow in microfluidics

Microfluidic large-scale integration on a chip for mass production of monodisperse droplets and particles.

A Study of Dielectrophoresis-Based Liquid Metal Droplet Control Microfluidic Device

Liquid metal enabled continuous flow reactor: A proof-of-concept

Microfluidics Platform for Glass Capillaries and Its Application in Droplet and Nanoparticle Fabrication.

An Integrated Droplet Manipulation Platform with Photodeformable Microfluidic Channels

Performance of different microfluidic devices in continuous liquid-liquid separation

Two-Dimensional Manipulation of Droplets on a Single-Sided Continuous Optoelectrowetting Digital Microfluidic Chip

On-demand Microfluidic Droplet Manipulation Using Hydrophobic Ferrofluid As a Continuous-Phase.

Electrocapillarity-Induced Hurricane-in-a-Tube Enables the Generation and Patterning of Liquid Metal Droplets

Droplets Transport in a Microfluidic Chip for In Vitro Compartmentalisation

Studies On The Electrostatic-Based Liquid Droplet Controlling Chip For Lab On Chip

A Gravity-Actuated Technique For Droplet Microfluidics

Investigation of Microfluidic Co-Flow Effects on Step Emulsification: Interfacial Tension and Flow Velocities

Online monodisperse droplets based liquid–liquid extraction on a continuously flowing system by using microfluidic devices

Fabrication of a Novel Liquid Metal Microelectrode in Microfluidic Chip

High-Throughput Microfluidic Production of Droplets and Hydrogel Microspheres through Monolithically Integrated Microchannel Plates