Abstract:Evaluating the mechanical behavior of hydrate-bearing sediment is a prerequisite and guarantee for achieving the safe exploitation and utilization of hydrates, and it is also important for the stability assessment of suction piles, anchor piles, and cable laying during the exploitation process. In this study, focusing on the strain-rate dependence of mechanical properties of methane hydrate-bearing clayey-silty sediments, 15 sets of drained triaxial shear tests with different strain rates and hydrate saturations were carried out, and X-ray computed tomography (CT) scans were performed on the specimens after deformation and dissociation. The results show that (1) all specimens exhibit characteristics of strain hardening and volumetric compression. With hydrate saturation increasing, the strain hardening phenomenon changes insignificantly, and the sensitivity of the hydrate-bearing sediment to strain rate increases due to the strong strain-rate dependency of the hydrate itself. The increased strain rate prevents small particles from adequately filling the pores, resulting in smaller volumetric compression; (2) as the strain rate increases, due to the coupled effect of hydrate cementation strengthening mechanism and decrease of local effective confining pressure, the shear strength decreases for hydrate-free sediments and increases for hydrate-bearing sediments; (3) when the hydrate saturation increases, the failure strength increases linearly, and the Secant Young’s modulus E 50 increases nonlinearly. A nonlinear relationship formula between strain rate and E 50 is given; (4) similar to previous studies in clay mechanics, the strain-rate dependence of hydrate-bearing clayey-silty sediments tends to decrease or disappear at lower strain rates; (5) for converted strain-rate tests, the loading method with strain rates from low to high progressively can make the filling and interlocking between particles more sufficient, resulting in greater shear strength of the sediment.

Pore Pressure and Strength Behaviors of Reconstituted Marine Sediments Involving Thermal Effects

Thermal effects on the dynamic properties of marine sediment under long-term low cyclic stress

Hypoplastic model for road base coarse-grained materials accounting for temperature effect

The Effects of Temperature on One-Dimensional Consolidation and Creep Behaviors of Hong Kong Marine Deposits

Experimental Study On the Effect of Hydrate Filling On the Mechanical Properties of Marine Sediments in the Shenhu Area, South China Sea

COUPLING EFFECTS OF INITIAL SHEAR STRESS AND LOADING RATE ON STRENGTH BEHAVIORS OF SATURATED SOFT CLAY

Mechanical Behavior of Hydrate-Bearing Clayey-Silty Sediments in the South China Sea: Strain-Rate Dependency

BEHAVIOR OF PORE WATER PRESSURE IN DYNAMIC TRIAXIAL TESTS OF SATURATED SOFT CLAY AND ITS EFFECT ON EFFECTIVE STRESS PATH

DIRECT SHEAR TEST FOR TEMPERATURE EFFECT ON SHEAR STRENGTH OF UNSATURATED CLAYEY SOILS

A Study of the Effect of Temperature on the Structural Strength of a Clayey Soil Using a Micropenetrometer

THE INFLUENCE OF HEATING AND COOLING ON THE STRUCTURAL STRENGTH OF A CLAYEY SOIL

Effects of temperature stress on diaphragm wall of circular deep foundation pit

Thermal effects on the shear behaviour of saturated coarse-grained soils with reference to post-earthquake deposits

Thermal Effects on Tensile Strength of a Compacted Soil

Coupled Effects of Matric Suction and Temperature on the Compression Behaviour of Loess

The Temperature-Dependent Monotonic Mechanical Characteristics of Marine Sand–Geomembrane Interfaces

Mechanical Behaviours of Gas-Hydrate-bearing Clayey Sediments of the South China Sea

Effect of thermal cycling on the isotropic consolidation and triaxial shear behavior of lateritic clay

Undrained triaxial tests on water-saturated methane hydrate–bearing clayey-silty sediments of the South China Sea

Strength criterion for intact loess under high-temperature action

Thermally induced volume change behavior of sand–clay mixtures