Abstract:Biodiesel (fatty acid methyl or ethyl esters) is made from vegetable oil or animal fat (triglycerides) reacting with methanol or ethanol using a catalyst (lye). It is safe, biodegradable, and produces less air pollutants than petroleum-based diesel or recycled restaurant greases. With the increasing demand of green energy source and the decreasing of fossil fuel, biodiesel has gained increasing attention as one of the alternative fuels. 100%biodiesel (B100) was used in this study. Experimental samples with water content of 0, 2.50%, 5.00%, 7.50%and 10.0%were set. There were 35 samples for every treatment with different water contents, and total 175 samples. 116 samples were selected for calibration set, and 58 samples for prediction set based with Kennard-Stone (K-S) method. Visible and near infrared spectra (Vis-NIR) technique which was a nondestructive and rapid method, was used to measure the water content in biodiesel. Samples were scanned using the ADS Handheld FieldSpec spectrometer and spectra of samples were acquired. Principal component analysis (PCA) was used to compress spectral data and observe the cluster’s situation of biodiesel with different water contents. The scores plot showed a good cluster distribution and the total accumulated variance of PC-1 and PC-2 was up to 99.3%. Random Frog algorithm was applied to extract spectral feature. Then, 8 sensitive wavelengths (563, 560, 642, 565, 562, 493, 559 and 779 nm) were selected respectively. Spectral feature and different water contents were set as input values of partial least squares regression (PLSR) and least squares-support vector machine (LS-SVM) models. It was showed that LS-SVM and PLSR with full spectra had good results, while the variables were too much (116×591) compared with the regression models (116×8). Results of the Random Frog-LS-SVM were better than the Random Frog-PLSR. R of the non-linear LS-SVM models with spectral feature extracted by Random Frog was higher than 0.965, RMSEC of 0.722, RMSEP of 0.520. Sensitive wavelengths extracted were good for eliminating the interfering spectral and improving the accuracy of the model. Results indicated that the Random Frog-LS-SVM as a satisfactory model can measure the water content in biodiesel accurately, which could provide a reference for practical application.

Digital image-based classification of biodiesel

Discriminant Analysis and Cluster Analysis of Biodiesel Fuel Blends Based on Fourier Transform Infrared Spectroscopy (FTIR)

Fourier Transform Infrared Spectroscopy (FTIR) and Multivariate Analysis for Identification of Different Vegetable Oils Used in Biodiesel Production

Fast characterization of biodiesel via a combination of ATR-FTIR and machine learning models

Method Development for Forensic Identification of Biodiesel Based on Chemical Fingerprints and Corresponding Diagnostic Ratios

Exploring Strategies to Mitigate the Lightness Effect on the Prediction of Soybean Oil Content in Blends of Olive and Avocado Oil Using Smartphone Digital Image Colorimetry

Assessment oil composition and species discrimination of Brassicas seeds based on hyperspectral imaging and portable near infrared (NIR) spectroscopy tools and chemometrics

Identification and fingerprinting of biodiesel blends by solid phase extraction and gas chromatography-mass spectrometry

Experimental data and prediction of the physical and chemical properties of biodiesel

Characterization and classification of oleogels and edible oil using vibrational spectroscopy in tandem with one-class and multiclass chemometric methods

Classification of sugar using digital imaging and pattern recognition techniques

Raman Spectroscopy for the Discrimination and Quantification of Fuel Blends

Quantitative Analysis of Biodiesel Adulterants Using Raman Spectroscopy Combined with Synergy Interval Partial Least Squares (siPLS) Algorithms

Gas chromatography-ion mobility spectrometric classification of vegetable oils based on digital image processing

Novel 1H low field nuclear magnetic resonance applications for the field of biodiesel

Blending biomass-based liquid biofuels for a circular economy: Measuring and Predicting Density for Biodiesel and Hydrocarbon mixtures at High Pressures and Temperatures by Machine Learning Approach

Method Development for Fingerprinting of Biodiesel Blends by Solid-Phase Extraction and Gas Chromatography-Mass Spectrometry

Sustainable Feedstocks and Challenges in Biodiesel Production: An Advanced Bibliometric Analysis

Measurement of Water Content in Biodiesel Using Visible and Near Infrared Spectroscopy Combined with Random-Frog Algorithm.

Development of a low-cost tool for semi-automatic classification and counting of particles in industrial oils