Digital Twin Virtual Welding Approach of Robotic Friction Stir Welding Based on Co-Simulation of FEA Model and Robotic Model

Shujun Chen,Guanchen Zong,Cunfeng Kang,Xiaoqing Jiang
DOI: https://doi.org/10.3390/s24031001
IF: 3.9
2024-02-05
Sensors
Abstract:Robotic friction stir welding has become an important research direction in friction stir welding technology. However, the low stiffness of serial industrial robots leads to substantial, difficult-to-measure end-effector deviations under the welding forces during the friction stir welding process, impacting the welding quality. To more effectively measure the deviations in the end-effector, this study introduces a digital twin model based on the five-dimensional digital twin theory. The model obtains the current data of the robot and six-axis force sensor and calculates the real-time end deviations using the robot model. Based on this, a virtual welding model was realized by integrating the FEA model with the digital twin model using a co-simulation approach. This model achieves pre-process simulation by iteratively cycling through the simulated force from the FEA model and the end displacement from the robot model. The virtual welding model effectively predicts the welding outcomes with a mere 6.9% error in lateral deviation compared to actual welding, demonstrating its potential in optimizing welding parameters and enhancing accuracy and quality. Employing digital twin models to monitor, simulate, and optimize the welding process can reduce risks, save costs, and improve efficiency, providing new perspectives for optimizing robotic friction stir welding processes.
engineering, electrical & electronic,chemistry, analytical,instruments & instrumentation
What problem does this paper attempt to address?
### Problems Addressed by the Paper The paper primarily addresses the issue of end-effector deviation caused by the low rigidity of industrial robots during the Robotic Friction Stir Welding (RFSW) process. Specifically: 1. **End-Effector Deviation Measurement**: - Traditional methods find it difficult to directly measure the end-effector deviation of robots during the friction stir welding process, which affects welding quality. To more effectively measure these deviations, the study introduces a digital twin model based on five-dimensional digital twin theory. 2. **Virtual Welding Model Implementation**: - By integrating the Finite Element Analysis (FEA) model with the robot model, a co-simulation method is used to achieve a virtual welding model. This model can simulate forces and robot end displacements through iterative cycles to achieve pre-processing simulation. 3. **Welding Result Prediction**: - The virtual welding model can predict welding results and their deviations before actual welding, with an error of only 6.9%, demonstrating its potential in optimizing welding parameters and improving accuracy and quality. 4. **Cost Savings and Efficiency Improvement**: - Using the digital twin model to monitor, simulate, and optimize the welding process can reduce risks, save costs, and improve efficiency, providing a new perspective for optimizing the robotic friction stir welding process. In summary, the paper aims to solve the measurement and compensation issues of end-effector deviation in the robotic friction stir welding process by constructing a digital twin model, thereby improving welding quality and production efficiency.