Abstract:The CABRI research reactor located at CEA Cadarache is dedicated to the analysis of nuclear fuel behavior during Reactivity-Injection Accident (RIA) in Pressurized Water Reactors (PWRs). The reactor experimentally simulates power pulse transients in the driver zone, which induce a RIA-representative energy deposition in a fuel sample contained in a water-loop that reproduces PWR thermal-hydraulics conditions. Power pulses are initiated by the 3 He depressurization of four transient rods, which introduces reactivity into the core. The injection of reactivity causes the reactor power to increase rapidly, resulting in a rise in fuel temperature. This temperature rise mitigates the power excursion by the Doppler effect. Subsequently, heat transfer occurs between the fuel, the cladding and the moderator. The evolution of the core power is measured during power transients, and these measurements can be valorized for the experimental validation of multi-physics simulation tools. Indeed, the experimental validation of these coupling mainly relies on measurement data coming from the current industrial reactor fleet. The measurement data coming from experimental facilities for the validation of multi-physics coupling at the reactor scale are very rare. A multi-physics core modelling based on the APOLLO3® and THEDI tools within the coupling platform C3PO was developed to simulate power transients in the CABRI reactor. A step-wise validation process has been defined and applied to this multi-physics coupling, from the numerical validation against Monte Carlo calculations at the neutron lattice level, to the integral experimental validation at the core level. Two types of transients were simulated: firstly, three neutron-driven supercritical transients (in which reactivity feedbacks are negligible), and secondly, a prompt supercritical transient, which is a high-energy transient with a five-decade power increase. The Calculation/Measurement (C/M) discrepancies on core power during supercritical transients can be explained with the support of the numerical validation results. However, the C/M discrepancies on the high-energy transient will require further investigation. A methodology to propagate nuclear data covariances in the multi-physics coupled simulation has been defined and implemented for CABRI transients. The first results of the covariance propagation on the high-energy transient showed that they cannot explain the C/M discrepancies. The impact of technological and experimental uncertainties on the transient simulation have to be analyzed. Finally, only the global core power is measured by ex-core instrumentation during the transient; it would be useful to carry out new local measurements at the pin-scale in the near future.

Analysis of JSI TRIGA MARK II reactor physical parameters calculated with TRIPOLI and MCNP

Numerical Benchmarks TRIPOLI−MCNP with Use of MCAM on FNG ITER Bulk Shield and FNG HCLL TBM Mock-Up Experiments

OpenMC-based high-fidelity model for the Moroccan TRIGA Mark II research reactor

Processing of JEFF-3.3 and ENDF/B-VIII.0 and testing with critical benchmark experiments and TRIGA Mark II research reactor using MCNPX

Characterization of the TRIGA Mark II reactor full-power steady state

Validation of the Serpent 2 code on TRIGA Mark II benchmark experiments

JSI TRIGA fuel rod reactivity worth experiments for validation of Serpent-2 and RAPID fuel burnup calculations

Characterization of the neutron spectra in three irradiation channels of the JSI TRIGA reactor using the GRUPINT spectrum adjustment code

Neutron-Physical and Radiation Characteristics of Different Low Enrichment Fuels (Thorium and Uranium) in a Proposed JRTR Research Reactor

Numerical simulation of non-steady state neutron kinetics of the TRIGA Mark II reactor Vienna

Implementation and Testing of Generalized Perturbation Theory Capabilities in TRIPOLI-4®

Confirmation of a realistic reactor model for BNCT dosimetry at the TRIGA Mainz

Neutronic and thermal-hydraulic analysis for TRIGA Mark II in subcooled nucleate boiling condition

Determination of neutron flux redistribution factors for a typical pressurized water reactor ex-core measurements using Monte Carlo technique

AGN-201K Educational and Research Reactor Benchmark Analyses by McCARD Monte Carlo Calculations

Numerical Monte Carlo analysis of the void coefficient in Pavia TRIGA Mark II reactor

Applications of MCAM for ITER TRIPOLI 3D neutronics modeling

Fuel burnup analysis of the TRIGA Mark II Reactor at the University of Pavia

Analysis of power transients in the CABRI experimental reactor with a multi-physics APOLLO3®/THEDI coupling

Multi-physics Coupled Analyzes of Research Nuclear Reactors Based on Steady-State and Kinetics Models

NEUTRONIC AND THERMAL HYDRAULICS ANALYSIS OF CONTROL ROD EFFECT ON THE OPERATION SAFETY OF TRIGA 2000 REACTOR