Abstract:Abstract Background Computer-aided modeling and design (CAM/CAD) of patient anatomy from computed tomography (CT) imaging and 3D printing technology enable the creation of tangible, patient-specific anatomic models that can be used for surgical guidance. These models have been associated with better patient outcomes; however, a lack of CT imaging guidelines risks the capture of unsuitable imaging for patient-specific modeling. This study aims to investigate how CT image pixel size (X-Y) and slice thickness (Z) impact the accuracy of mandibular models. Methods Six cadaver heads were CT scanned at varying slice thicknesses and pixel sizes and turned into CAD models of the mandible for each scan. The cadaveric mandibles were then dissected and surface scanned, producing a CAD model of the true anatomy to be used as the gold standard for digital comparison. The root mean square (RMS) value of these comparisons, and the percentage of points that deviated from the true cadaveric anatomy by over 2.00 mm were used to evaluate accuracy. Two-way ANOVA and Tukey-Kramer post-hoc tests were used to determine significant differences in accuracy. Results Two-way ANOVA demonstrated significant difference in RMS for slice thickness but not pixel size while post-hoc testing showed a significant difference in pixel size only between pixels of 0.32 mm and 1.32 mm. For slice thickness, post-hoc testing revealed significantly smaller RMS values for scans with slice thicknesses of 0.67 mm, 1.25 mm, and 3.00 mm compared to those with a slice thickness of 5.00 mm. No significant differences were found between 0.67 mm, 1.25 mm, and 3.00 mm slice thicknesses. Results for the percentage of points deviating from cadaveric anatomy greater than 2.00 mm agreed with those for RMS except when comparing pixel sizes of 0.75 mm and 0.818 mm against 1.32 mm in post-hoc testing, which showed a significant difference as well. Conclusion This study suggests that slice thickness has a more significant impact on 3D model accuracy than pixel size, providing objective validation for guidelines favoring rigorous standards for slice thickness while recommending isotropic voxels. Additionally, our results indicate that CT scans up to 3.00 mm in slice thickness may provide an adequate 3D model for facial bony anatomy, such as the mandible, depending on the clinical indication.

Multicentre, double‐blind comparison of terfenadine and cetirizine in patients with seasonal allergic rhinitis

Loss of endothelium-dependent vasodilation in the pulmonary vessels of sheep after prolonged endotoxin.

A Numerical Simulation Method for Ultrasonic Transmission in Cancellous Bone Based on a Four-Parameter Random Growth Method

Experimental Testing and Biomechanical CT Analysis of Chinese Cadaveric Vertebrae with Different Modeling Approaches

A method for patient-specific evaluation of vertebral cancellous bone strength: in vitro validation

Regulation of Signal Transduction and Role of Platelets in Liver Regeneration

Exploring CT pixel and voxel size effect on anatomic modeling in mandibular reconstruction

[Three-Dimensional Finite Element Model of Thoracolumbar Spine with Osteoporotic Vertebral Compression Fracture].

Mechanical Testing and Biomechanical CT Analysis to Assess Vertebral Flexion Strength of Chinese Cadavers.

Influence of image reconstruction kernel on computed tomography-based finite element analysis in the clinical opportunistic screening of osteoporosis—A preliminary result

Intrinsic mechanical properties of trabecular calcaneus determined by finite-element models using 3D synchrotron microtomography

The Effect of Reconstruction Parameters of Spine QCT on Bone Mineral Density

Establishment and analysis of thoracicolumber three-dimensional finite element models in normal people and osteoporotic patients

An Analysis by Synthesis Method that Allows Accurate Spatial Modeling of Thickness of Cortical Bone from Clinical QCT

Validation of a voxel-based FE method for prediction of the uniaxial apparent modulus of human trabecular bone using macroscopic mechanical tests and nanoindentation

Clinical CT-based assessment of trabecular bone shear modulus using nonlinear finite element modelling

Aging and negative priming in a location suppression task: the long and the short of it.

Vertebral bone quality different in magnetic resonance imaging parameters

Three-dimensional Simulation of Quantitative Ultrasound in Cancellous Bone using the Echographic Response of a Metallic Pin

Quantitative CT-based bone strength parameters for the prediction of novel spinal implant stability using resonance frequency analysis: a cadaveric study involving experimental micro-CT and clinical multislice CT

Switching on fluorescence for selective visual recognition of naringenin and morin with a metal-organic coordination polymer of Zn(bix) [bix=1,4-bis(imidazol-1-ylmethyl)benzene].