Abstract:The isoperibolic calorimetry method was employed to determine, for the first time, the partial and integral mixing enthalpies for melts in the Eu–Ge system over the entire composition range at 1200 K and 1370–1440 K. The minimum mixing enthalpy for these melts was –49.1 ± 4.4 kJ/mol and was shown by the alloy with x Ge = 0.45, while = –145.7 ± 22.3 kJ/mol and = –166.8 ± ± 19.8 kJ/mol at 1400 ± 3 K, correlating with the solid-state behavior of these melts. This allows categorizing these melts within the series of the Ge–Ln (lanthanide) systems and justifying the thermodynamic properties of melts in the Eu–Ge system, in particular, and in the Ge–Ln system, in general. Using the thermochemical properties for melts in the Eu–Ge system, the ideal associated solution model was employed to optimize and calculate the Gibbs energies, enthalpies, and entropies of formation for the melts, associates in melts, and intermetallics. A large number of associates, especially EuGe, formed in the studied melts because of the highest probability of collision between two dissimilar atoms in liquid alloys. The maximum mole fraction of the EuGe associate reached 0.48 and those of Eu 3 Ge, Eu 2 Ge, EuGe 2 , and EuGe 3 were 0.2, 0.26, 0.24, and 0.26, respectively. The activities of components in melts of the Eu–Ge system showed substantial negative deviations from the ideal solution, correlating with our thermochemical properties. This all indicated strong interactions between dissimilar atoms in melts of the Eu–Ge system, likely involving the transfer of valence electrons of europium to the 4p orbital of germanium. The Δ G values over the entire composition range were greater than Δ H , with Δ G min = –28.8 kJ/mol at x Ge = 0.45. Moreover, the Δ G function was also almost symmetrical because of the entropy contribution (mixing entropy of the studied melts was negative, and Δ S min = –15.0 J/mol K at x Ge = 0.45). The calculations based on the ideal associated solution model also established that the values for melts in the Eu–Ge system increased insignificantly with temperature, while increased more substantially. This might be due to the break of covalent bonds between germanium atoms. Complete information on the thermodynamic properties of all phases was obtained, enabling a thermodynamic description of the Eu–Ge system for the first time.

Thermochemical investigations in the system Cd-Gd

Reinvestigation of the Cd-Gd phase diagram

Thermodynamic Re-Assessment of the Mn-La Binary System

Magnetic, electronic and optical properties of lanthanide hydrides, GdH2 and GdH3

Thermodynamic Description of the Ce–Ga and Ga–Gd Systems

Thermodynamic Description of the Gadolinium-Cadmium Phase Diagram

The high-pressure phase transitions and vibrational properties of zinc-blende XTe (X = Zn, Cd, Hg): Performance of local-density-approximation density functional theory

Thermodynamic Description of Systems Cd-Te, Hg-Te and Cd-Hg-Te Using the Model of Associated Liquid Solution

Thermodynamic, Structural and Surface Properties of Cd-Na Alloys in Liquid State

Study on the Thermodynamics of the Gadolinium-Hydrogen Binary System (h/gd = 0.0–2.0) and Implications to Metallic Gadolinium Purification

Thermodynamic Properties of Melts in the Eu–Ge System

Study of Structural Behavior of Cadmium Based Alloys at Molten State

Thermodynamic Characteristics of Bismuth, Gadolinium, Neodymium, and Cobalt Oxide Compounds

Phase equilibria in the neodymium-cadmium binary system

Diffusion behaviour and mechanical properties of binary Mg–Gd system

Reactive Diffusion in Mg–Gd Binary System at 773 K

Isothermal Section of Gd-Sm-Co Ternary System at 773 K

First-principle Studies on the Mechanical, Thermodynamic and Electronic Properties of Β″-Mg3gd and Β′-Mg7gd Alloys under Pressure

First principal calculation of the physical proprieties of the ternary intermetallic compound Gd2Cu2Cd for magnetic refrigeration applications

Experimental Investigation and Thermodynamic Assessment of the Cr–Ti System

Interplay of structure, magnetism, and magneto-thermal effects in Gadolinium-based intermetallic compound