Abstract:In the field of smart materials, microencapsulated self-healing technology has received a lot of attention in recent years. However, the existing microcapsule preparation techniques continue to have difficulties controlling the structural parameters of microcapsules at the microscopic scale, and there are difficulties in investigating the mechanical properties of microcapsules based on a single structural parameter experimentally. In addition, the commonly used Finite Element Method (FEM) also has significant limitations in investigating dynamic damage problems in non-homogeneous, discontinuous materials. To address the aforementioned issues, the Discrete Element Method (DEM) is used to create a numerical model of a single microcapsule. The reliability and feasibility of the discrete element model are demonstrated by utilizing the microcapsule's mechanical intrinsic model and experiments. Further, the discrete element models are employed to analyze the influence of microcapsule structure/material parameters on the crack resistance and fracturability of a single microcapsule, discuss the micromechanics of the microcapsule damage process, and predict the rupture mode and rupture location of a single microcapsule. It is shown that (1) the larger the wall thickness and smaller the diameter of the microcapsule, the stronger the deformation resistance of the microcapsule, but the rupture load and nominal rupture stress increase linearly with the increase of wall thickness and decrease nonlinearly with the increase of diameter; (2) the maximum stress field during compression of small deformation microcapsules occurs in the polar region, and the initial scattered damage appears in the polar region, also the scattered damage gradually develop into one or more main cracks along the meridian and (3) large deformation microcapsule compression through three stages of elastic deformation, plastic deformation and hardening, and gradually occur three kinds of the morphology of "spherical", "drum-shaped" and "butterfly-shaped", while rupture after producing scattered cracks and fragments in the near-polar region.

Characterization of thin-walled self-healing microcapsules reinforced with multi-walled carbon nanotubes

Preparation And Application Of Melamine-Urea-Formaldehyde Self-Healing Microcapsules Modified By Nano-Al2o3

Effects Of Surface Modification Of Self-Healing Poly(Melamine-Urea-Formaldehyde) Microcapsules On The Properties Of Unsaturated Polyester Composites

Preparation and properties of carbon fiber reinforced unsaturated polyester self-healing composites

A two-dimensional micromechanical damage-healing model on microcrack-induced damage for microcapsule-enabled self-healing cementitious composites under tensile loading

Effects of Microcapsules Modification on Interfacial Compatibility of Unsaturated Polyester Self-healing Composites

An micro-level study on the cracking performance of encapsulation-based self-healing resin mineral composites under dynamic load based on XFEM

Interfacial Strengthening and Self-Monitoring in Carbon Fiber-Reinforced Composites via Carbon Nanotube-Based Damage Sensors

Investigation on Microcapsule Self‐healing Mechanism of Polymer Matrix Composites Based on Numerical Simulation

Mesoscopic study on mechanical properties and dynamic damage characteristics of self-healing microcapsule

A Methodology for Damage Strength Evaluation of A Single Biomimetic Microcapsule

Mechanical behavior and self-healing mechanism of polyurea-based double-walled microcapsule/epoxy composite films

The study on the mechanical properties of PU/MF double shell self-healing microcapsules

Healing Efficiency of CNTs-Modified-UF Microcapsules That Provide Higher Electrical Conductivity and EMI Shielding Properties

Micromechanical Properties of a New Polymeric Microcapsule for Self-Healing Cementitious Materials

Development of 3D-Printed Self-Healing Capsules with a Separate Membrane and Investigation of Mechanical Properties for Improving Fracture Strength

Improvement of the rupture strength of MF shell microcapsule by incorporating TiO2 nanoparticles with an optimal content

Performance of microcapsule-based self-healing concrete under multiaxial compression with large axial strain: Mechanical properties failure mode, and pore structure

Constitutive Model and Damage of Self-Healing 3D Braided Composites with Microcapsules

Preparation and characterization of self‐healing microcapsules with poly(urea‐formaldehyde) grafted epoxy functional group shell

Constitutive relations, mechanical behaviour, and failure criterion of microcapsule-based self-healing concrete under uniaxial and triaxial compression