Abstract:A bidirectional deployable parabolic cylindrical reflector for an L-band synthetic aperture radar is presented in this study, in which a self-deployed antenna with low weight was designed. The antenna consists of four curved surfaces formed from thin sheets of composite materials connected by hinges along the edges, and the reflective surface is provided by the front surface. The edge profiles of connecting lines were obtained through geometric analysis. A scaled model, including design and manufacture, was demonstrated to validate the process from the folded state to the fully deployed state. The non-contact synchronous vision measuring method was used to test the basic frequency of the scaled model, and the test results gave the verification of the analyses. Compared with the existing unidirectional deployable antenna, this new type of bidirectional deployable antenna can be applied to larger-size antennas and has better performance because the glass-woven tape connections were substituted with more reliable hinges. Static, modal, harmonic response, and transient response analyses of the full-sized reflector structure were modeled with the commercial finite element (FE) package ABAQUS. The modeling techniques were developed to predict the structural dynamic behavior of the reflector and the results showed that the first natural frequency was 0.865 Hz, and the reflector structure had good stiffness in three directions. This proposed structure has very high stiffness-to-mass ratio because of its hollow solid construction. A preliminary simulation of radiation properties of the parabolic cylindrical antenna, fed by an off-set linear feed horn array, was conducted to obtain the radiation pattern of the feed and the reflector.

Space deployable parabolic reflector based on shape memory polymer composites

Design and Analysis of Bidirectional Deployable Parabolic Cylindrical Antenna

The Application of Shape Memory Polymer Composite in Space Deployable Truss Structure

A Kirigami Shape Memory Polymer Honeycomb Concept for Deployment

Design and Deploying Study of a New Petal-Type Deployable Solid Surface Antenna

A shape design method of large space deployable paraboloid antenna

Structure design and mechanical measurement of inflatable antenna

Shape memory polymer foam: active deformation, simulation and validation of space environment

Remote Controlled Multishape Polymer Nanocomposites with Selective Radiofrequency Actuations

Numerical Analysis of Space Deployable Structure Based on Shape Memory Polymers

Reflector design and precision measurement of inflatable antenna

Shape Memory Polymer S-shaped Mandrel for Composite Air Duct Manufacturing

Mechanical study on initial profile solution for inflatable reflector made of orthotropic material

Fiber Reinforced Shape-Memory Polymer Composite and Its Application in Deployable Hinge in Space

Thermal design and analysis of a flexible solar array system based on shape memory polymer composites

Carbon Fiber Reinforced Shape Memory Epoxy Composites with Superior Mechanical Performances

Shape Memory Polymers Composites and Their Applications in Deployable Structures

Synchronous deployed design concept triggered by carbon fibre reinforced shape memory polymer composites

Mechanical behaviors and applications of shape memory polymer and its composites

Structural and dynamic analysis of a flexible solar array based on shape memory polymer composites

Actuation of Parabolic Cylindrical Shell Panels with Light-Activated Shape Memory Actuators